|
|
|
| NZ2合金在不同介质中腐蚀后氧化膜的晶体结构 |
| 章海霞;李中奎;张建军;郑欣;FRUCHART Daniel; HLIL El Kébir;孙军;周廉 |
| 西安交通大学材料科学与工程学院 |
|
| 西安交通大学材料科学与工程学院 |
引用本文:
章海霞; 李中奎; 张建军; 郑欣; FRUCHART Daniel; HLIL El; Kébir; 孙军 ; 周廉 . NZ2合金在不同介质中腐蚀后氧化膜的晶体结构[J]. 材料研究学报, 2008, 22(3): 327-332.
1 G.P.Sabol,G.R.Kilp,M.G.Balfour,E.Roberts,Develop- ment of a cladding alloy for high burnup,in:Zirconium in the Nuclear Industry,Eighth International Symposium, edited by L.F.P.Van Swam and C.M.Eucken(America, ASTM Spec.Tech.Publ.1023,1989)p.227
2 R.J.Comstock,G.Schoenberger,G.P.Sabol,Influence of processing variables and alloy chemistry on the corrosion behavior of ZIRLO nuclear fuel cladding,in:Zirconium in the Nuclear Industry,Eleventh International Symposium, edited by E.R.Bradley and E.R.Sabol(America,ASTM Spec.Tech.Publ.1295,1996)p.710
3 A.V.Nikulina,V.A.Markelov,M.M.Peregud,Zirconium alloy E635 as a material for fuel rod cladding and other components of VVER and RBMK cores,in:Zirconium in the Nuclear Industry,Eleventh International Symposium, edited by E.R.Bradley and E.R.Sabol(America,ASTM Spec.Tech.Publ.1295,1996)p.785
4 J.Y.Park,B.K.Choi,S.J.Yoo,Y.H.Jeong,Corrosion be- havior and oxide properties of Zr-1.1wt%Nb-0.05wt%Cu alloy,Journal of Nuclear Materials,359(1),59(2006)
5 A.T.Motta,A.Yilmazbayhan,M.J.G.Silva,R.J.Comstock, G.S.Was,J.T.Busby,E.Gartner,Q.J.Peng,Y.H.Jeong, J.Y.Park,Zirconium alloys for supercritical water reac- tor applications:Challenges and possibilities,Journal of Nuclear Materials,371,61(2005)
6 A.Grandjean,Y.Serruys,Metal and oxygen mobilities dur- ing zircaloy-4 oxidation at high temperature,Journal of Nuclear Materials,273(1),111(1999)
7 M.Oskarsson,E.Ahlberg,U.Andersson,K.Pettersson, Characterisation of pre-transition oxides on zircaloys, Journal of Nuclear Materials,297(1),77(2001)
8 L.Gosmain,C.Valot,D.Ciosmak,O.Sicardy,Study of stress effects in the oxidation of zircaloy-4,Solid State Ionics,141,633(2001)
9 ZHAO Wenjin,MIAO Zhi,JIANG Hongman,YU Xi- aowei,LI Weijun,LI Cong,ZHOU Bangxin,Corrosion behavior of Zr-Sn-Nb alloy,Journal of Chinese Society for Corrosion and Protection,22(2),124(2002) (赵文金，苗志，蒋宏曼，于晓卫，李卫军，李聪，周邦新，Zr-Sn-Nb合金的腐蚀行为研究，中国腐蚀与防护学报，22(2)，124(2002))
10 ZHOU Bangxin,LI Qiang,HUANG Qiang,MIAO Zhi, ZHAO Wenjin,LI Cong,The effect of water chemistry on corrosion resistance of zirconium alloys,Nuclear Power Engineering,21(5),439(2000) (周邦新，李强，黄强，苗志，赵文金，李聪，水化学对锆合金耐腐蚀性能影响的研究，核动力工程，21(5)，439(2000))
11 ZHOU Bangxin,LI Qiang,YAO Meiyi,LIU Wenqing,The grains morphology of oxide films for zircolay-4,Rare Metal Materials and Engineering,32(6),417(2003) (周邦新，李强，姚美意，刘文庆，锆-4合金氧化膜中晶粒形貌观察，稀有金属材料与工程，32(6)，417(2003))
12 LIU Wenqing,CHEN Wenjue,LI Qiang,ZHOU Bangxin, YAO Meiyi,Effect of water chemistry on oxide morph- plogies of zircaloy-4,Nuclear Power Engineering,25(6), 517(2004) (刘文庆，陈文觉，李强，周邦新，姚美意，水化学对Zr-4合金氧化膜形貌的影响，核动力工程，25(6)，517(2004))
13 T.Arima,K.Miyata,Y.Inagaki,K.Idemitsu,Oxidation properties of Zr-Nb alloys at 500-600℃under low oxygen potentials,Corrosion Science,47,435(2005)
14 LI Zhongkui,LIU Jianzhang,ZHOU Lian,LI Cong, ZHANG Jianjun,Study on microstructure of oxide film for new zirconium alloys,Rare Metal Materials and Engi- neering,31(4),261(2002) (李中奎，刘建章，周廉，李聪，张建军，新锆合金氧化膜微观组织结构的研究，稀有金属材料与工程，31(4)，261(2002))
15 Y.H.Jeong,K.O.Lee,H.G.Kim,Correlation between mi- crostructure and corrosion behavior of Zr-Nb binary alloy, Journal of Nuclear Materials,302,9(2002)
16 Y.H.Jeong,H.G.Kim,T.H.Kim,Effect ofβphase,pre- cipitate and Nb-concentration in matrix on corrosion and oxide characteristics of Zr-xNb alloys,Journal of Nuclear Materials,317,1(2003)
17 A.J.G.Maroto,R.Bordoni,M.Villegas,A.M.Olmedo, M.A.Blesa,A.Iglesias,P.Koenig,Growth and character- ization of oxide layers on zirconium alloys,Journal of Nu- clear Materials,229,79(1996)
18 P.Bouvier,J.Godlewski,G.Lucazeau,A Raman study of the nanocrystallite size effect on the pressure-temperature phase diagram of zirconia grown by zirconium-based alloys oxidation,Journal of Nuclear Materials,300,118(2002)
19 Y.H.Jeong,J.H.Baek,S.J.Kim,H.G.Kim,H.Ruhmann, Corrosion characteristics and oxide microstructures of zircaloy-4 in aqueous alkali hydroxide solution,Journal of Nuclear Materials,270,322(1999)
20 N.Pétigny,P.Barberis,C.Lemaignan,Ch.Valot, M.Lallemant,In situ XRD analysis of the oxide lay- ers formed by oxidation at 743k on zircaloy-4 and Zr-1NbO,Journal of Nuclear Materials,280,318(2000)
21 A.Yilmazbayhan,E.Breval,A.T.Motta,R.J.Comstock, Transmission electron microscopy examination of oxide layers formed on Zr alloys,Journal of Nuclear Materials, 349,265(2006)
22 P.Barberis,T.Merle-Méjean,P.Quintard,On Raman spec- troscopy of zirconium oxide films,Journal of Nuclear Ma- terials,246(3),232(1997)
23 P.Barbéris,G.Corolleur-Thomas,R.Guinebretière, T.Merle-Mejean,A.Mirgorodsky,P.Quintard,Raman spectra of tetragonal zirconia:powder to zircaloy oxide frequency shift,Journal of Nuclear Materials,288(3), 241(2001)
24 J.Godlewski,J.P.Gross,M.Lambertin,J.F.Wadier, H.Weidinger,Raman spectroscopy study of the tetragonal to monoclinic transition in oxide scales and determination of overall oxygen diffusion by nuclear microanalysis of O18,in:Zirconium in the Nuclear Industry,Ninth International Symposium,edited by C.M.Euckenand A.M.Grade(America,ASTM Spec.Tech.Publ.1132, 1991)p.416
25 ZHANG Haixia,LI Zhongkui,D.Fruchart,ZHANG Tingjie,ZHANG Jianjun,ZHOU Jun,ZHOU Lian,Crys- tal structure analysis of oxide film of new zirconium alloy,Rare Metal Materials and Engineering,35(12), 1908(2006) (章海霞，李中奎，D．Fruchart，张廷杰，张建军，周军，周廉，新锆合金氧化膜的晶体结构分析，稀有金属材料与工程，35(12)，1908(2006))
26 T.Arima,K.Miyata,Y.Inagaki,K.Idemistu,Oxidation properties of Zr-Nb alloys at 500-600℃under low oxygen potentials,Corrosion Science,47,435(2005)
27 P.Barberis,Zirconia powders and zircaloy oxide films: tetragonal phase evolution during 400℃autoclave tests, Journal of Nuclear Materials,226,34(1995)
28 J.Godlewski,How the tetragonal zirconia is stabilized in the oxide scale that is formed on a zirconium alloy cor- roded at 400℃in steam,in:Zirconium in the Nu- clear Industry-Thenth International Symposium,edited by A.M.Garde and E.R.Bradley(America,ASTM Spec. Tech.Publ.1245,1993)p.663X |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
