聚合物先驱体的结构对氮化硅陶瓷性能的影响

材料研究学报

2009, Vol. 23

Issue (1): 39-42

研究论文

本期目录 | 过刊浏览

聚合物先驱体的结构对氮化硅陶瓷性能的影响

陈立新; 王亚洲; 宋家乐

西北工业大学理学院~教育部空间物理与化学重点实验室西安 710072

Preparation of silicon nitride ceramic derived by UV cure polymer ceramic precursor: The effect of polyceramic structure on pyrolyzate properties

CHEN Lixin; WANG Yazhou; SONG Jiale

School of Science; Key Laboratory of Applied Physics and Chemistry of Ministry of Education; Northwestern Polytechnical University; Xi'an 710072

引用本文:

陈立新王亚洲宋家乐. 聚合物先驱体的结构对氮化硅陶瓷性能的影响[J]. 材料研究学报, 2009, 23(1): 39-42.
, , . Preparation of silicon nitride ceramic derived by UV cure polymer ceramic precursor: The effect of polyceramic structure on pyrolyzate properties[J]. Chin J Mater Res, 2009, 23(1): 39-42.

全文: PDF(532 KB)

摘要:

以紫外光固化巯基/乙烯基硅氮烷共聚体系制备了不同结构的聚合物陶瓷先驱体, 高温裂解后得到氮化硅陶瓷. 采用X射线衍射仪, 场发射扫描电镜和能谱仪等手段对巯基官能度、巯基化合物分子尺寸、巯基/乙烯基硅氮烷配比以及惰性填料进行了表征, 研究了聚合物先驱体的结构对氮化硅陶瓷的结晶度和晶粒尺寸的影响. 结果表明: 巯基单体官能度和分子尺寸的增加导致先驱体陶瓷的结晶度提高以及平均晶粒尺寸降低; 巯基单体相对含量的增加导致先驱体陶瓷的结晶度增加, 乙烯基与巯基摩尔比为 1 : 0.5时平均晶粒尺寸出现峰值; β--Si₃N₄粉体惰性填料的加入能明显抑制先驱体陶瓷的尺寸收缩.

关键词 ：无机非金属材料, 巯基/乙烯基体系, 紫外光固化, 先驱体, 结晶度

Abstract：

The polymer ceramic precursors with varied structures were made from UV cure thiol/vinyl silizane copolymer. Silicon nitride ceramic was obtained by pyrolyzing at high temperature. The effects of functionality of thiol, size of thiol molecular, thiol to vinyl ratio and the amount of inert filler on crystallinity and grain size were investigated and characterized by XRD, FESEM and energy spectrometer. It is found that the increase of functionality of thiol declines the crystallinity of the ceramic, but makes the grain size increase, whereas, the high of thiol stoichiometric molecular weight has the reverse effect. The increase of thiol to vinyl ratio enhances the crystallinity of the ceramic. There is a peak of the grain size when the vinyl to thiol ratio is 1:0.5. The incorporation of inert filler(β-Si3N4) can obviously depress the shrinkage of the size of ceramic.

Key words： inorganic non-metallic materials system of thiol/vinyl UV cure precursor crystallinity

收稿日期: 2008-02-21

ZTFLH:

TB321

基金资助:

国家自然科学基金20574056、装备预研基金9140A12070106 HK0338和西北工业大学博士论文创新基金CX200614资助项目.

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	陈立新
	王亚洲
	宋家乐
44.8K

链接本文:

https://www.cjmr.org/CN/ 或 https://www.cjmr.org/CN/Y2009/V23/I1/39

1 ZHANG Junbao, LEI Tingquan, WEN Guangwu, ZHOU Yu, Research progress in synthesis of silicon oxynitrid, Materials Science & Technology, 9(4), 434(2001)
(张俊宝, 雷廷权, 温广武, 周玉, 氮氧化硅合成研究进展, 材料科学与工艺, 9(4), 434(2001))
2 O.Delverdier, M.Monthioux, Thermal behavior of (organosilicon) polymer-derived ceramics V: Main facts and trends, J. of the Eur. Ceram. Soc., 16, 721(1996)
3 K.Kakimoto, F.Wakai, J.Bill, A.Fritz, Fabrication of polycarbosilane-derived SiC bulk ceramics by carbothermic reduction: Effect of green density on crystallinity of pyrolyzed compacts, J. Am. Ceram. Soc. Sep., 82(9), 23(1999)
4 G.Ziegler, H.J.Kleebe, G.Motz, H.Muller, S.Traszl, W.Weibelzahl, Synthesis, microstructure and properties of SiCN ceramics prepared from tailored polymers, Materials Chemistry and Physics, 61(1), 55(1999)
5 Linan An, Wenge Zhang, V.M.Bright, M.L.Dunn, R.Raj, The 13th IEEE Annual International Conference on Microelectromechanical Systems (MEMS-2000), Miyazaki, Japan, January, 23-27, 619(2000)
6 Sirish K. Reddy, Neil B. Cramer, Tsali Cross, Rishi Raj, Christopher N. Bowman, Polymer-derived ceramic materials from thiol-ene Photopolymerization, Chem. Mater., 15, 4257(2003)
7 E.Andrzejewska, Photopolymerization kinetics of multifunctional monomers, Progress in Polymer Science, 26(4), 605(2001)

[1]	宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125的CO₂ 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[2]	邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[3]	任富彦, 欧阳二明. g-C₃N₄ 改性Bi₂O₃ 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[4]	刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO₂ 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[5]	李延伟, 罗康, 姚金环. Ni(OH)₂ 负极材料的十二烷基硫酸钠辅助制备及其储锂性能[J]. 材料研究学报, 2023, 37(6): 453-462.
[6]	余谟鑫, 张书海, 朱博文, 张晨, 王晓婷, 鲍佳敏, 邬翔. N掺杂生物炭的制备及其对Co²⁺ 的吸附性能[J]. 材料研究学报, 2023, 37(4): 291-300.
[7]	朱明星, 戴中华. SrSc_0.5Nb_0.5O₃ 改性BNT基无铅陶瓷的储能特性研究[J]. 材料研究学报, 2023, 37(3): 228-234.
[8]	刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C₃N₄/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[9]	周毅, 涂强, 米忠华. 制备方法对磷酸盐微晶玻璃结构和性能的影响[J]. 材料研究学报, 2023, 37(10): 739-746.
[10]	谢锋, 郭建峰, 王海涛, 常娜. ZnO/CdS/Ag复合光催化剂的制备及其催化和抗菌性能[J]. 材料研究学报, 2023, 37(1): 10-20.
[11]	余超, 邢广超, 吴郑敏, 董博, 丁军, 邸敬慧, 祝洪喜, 邓承继. 亚微米Al₂O₃ 对重结晶碳化硅的作用机制[J]. 材料研究学报, 2022, 36(9): 679-686.
[12]	方向明, 任帅, 容萍, 刘烁, 高世勇. 自供能Ag/SnSe纳米管红外探测器的制备和性能研究[J]. 材料研究学报, 2022, 36(8): 591-596.
[13]	李福禄, 韩春淼, 高嘉望, 蒋健, 许卉, 李冰. 氧化石墨烯的变温发光[J]. 材料研究学报, 2022, 36(8): 597-601.
[14]	朱晓东, 夏杨雯, 喻强, 杨代雄, 何莉莉, 冯威. Cu掺杂金红石型TiO₂ 的制备及其光催化性能[J]. 材料研究学报, 2022, 36(8): 635-640.
[15]	熊庭辉, 蔡文汉, 苗雨, 陈晨龙. ZnO纳米棒阵列和薄膜的同步外延生长及其光电化学性能[J]. 材料研究学报, 2022, 36(7): 481-488.

Viewed

Full text

Abstract

Cited

Shared

Discussed