类金刚石薄膜对轴承钢表面机械性能和滚动接触疲劳寿命的影响

材料研究学报

2009, Vol. 23

Issue (1): 43-48

研究论文

本期目录 | 过刊浏览

类金刚石薄膜对轴承钢表面机械性能和滚动接触疲劳寿命的影响

刘洪喜¹; 蒋业华^1; 周荣¹; 詹肇麟¹; 汤宝寅²

1.昆明理工大学机电工程学院昆明 650093
2.哈尔滨工业大学现代焊接生产技术国家重点实验室哈尔滨 150001

Effect of diamond-like carbon films on the bearing steel surface mechanical properties and rolling contact fatigue life

LIU Hongxi¹; JIANG Yehua¹; ZHOU Rong¹; ZHAN Zhaolin¹; TANG Baoyin²

1.School of Mechanical and Electrical Engineering; Kunming University of Science and Technology; Kunming 650093
2.State Key Laboratory of Advanced Welding Production Technology; Harbin Institute of Technology; Harbin 150001

引用本文:

刘洪喜蒋业华周荣詹肇麟汤宝寅. 类金刚石薄膜对轴承钢表面机械性能和滚动接触疲劳寿命的影响[J]. 材料研究学报, 2009, 23(1): 43-48.
. Effect of diamond-like carbon films on the bearing steel surface mechanical properties and rolling contact fatigue life[J]. Chin J Mater Res, 2009, 23(1): 43-48.

全文: PDF(923 KB)

摘要:

使用等离子体浸没离子注入与沉积(PIII&D)技术在轴承钢基体表面合成类金刚石(DLC)薄膜, 研究了薄膜的结构和性能. 结果表明, 所制备的DLC薄膜主要是由金刚石键(sp³)和石墨键(sp²)组成的混合无定形碳, 且sp³键含量大于10%. DLC膜层致密均匀, 与基体结合良好. DLC膜具有很高的硬度和杨氏模量, 分别达到40 GPa和430 GPa; 其最低摩擦系数由基体的0.87下降到0.2. 被处理薄膜试件在90%置信区间下的L₁₀、L₅₀、L_a和平均寿命L较基体分别延长了10.1倍、4.2倍、3.5倍和3.4倍. PIII&D轴承钢滚动接触疲劳寿命的分散性得到了显著改善.

关键词 ：材料表面与界面, 等离子体浸没离子注入与沉积, 类金刚石薄膜, 滚动接触疲劳寿命, 轴承钢

Abstract：

Microstructure and properties of plasma immersion ion implantation and deposition (PIII&D) diamond-like carbon (DLC) films on bearing steel substrate were investigated. PIII&D DLC consists of a mixture of amorphous and crystalline phases, with a variable ratio of sp²/sp³ carbon bonds, and the sp³ bonds content more than 10%. The DLC film has extremely smooth area, good adhesion, high uniformity and efficiency of space filling over large areas. The nanohardness (H) and the elastic modulus (E) of DLC films measurement indicates that the maximum H(E) value is 40 GPa (430 GPa), increases by 263.6% (95.5%). The friction and wear behaviors and rolling contact fatigue (RCF) life of these samples have also been investigated by ball-on-disc and three-ball-rod fatigue testers. Results show that the friction coefficient decrease from 0.87 to 0.2; the L₁₀ L₅₀L_a and mean life L of treated sample in 90% confidence level increases by 10.1, 4.2, 3.5 and 3.4 times, respectively. The RCF life scatter extent of treated samples is improved significantly.

Key words： plasma immersion ion implantation and deposition (PIII& D) diamond-like carbon (DLC) film rolling contact fatigue life bearing steel

收稿日期: 2008-02-22

ZTFLH:

TG172

基金资助:

国家自然科学基金资助项目50665004.

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	刘洪喜
44.8K

链接本文:

https://www.cjmr.org/CN/ 或 https://www.cjmr.org/CN/Y2009/V23/I1/43

1 K.D.Bouzakis, N.Vidakis, A.Lontos, S.Mitsi, K.David, Implementation of low temperature deposited coating fatigue parameters in commercial roller bearings catalogues, Surf. Coat. Technol., 133-134, 489(2000) 2 R.Tinscher, H.Bomas, P.Mayr., Mechanical properties of a spray deposited bearing steel, Materials Science and Engineering A, 326, 11(2002) 3 R.Ahmed, M.Hadfield, Rolling contact fatigue performance of plasma sprayed coatings, Wear, 220, 80(1998) 4 S.Stewart, R.Ahmed, Rolling contact fatigue of surface coatings–a review, Wear, 253, 1132(2002) 5 Michael I. Current, U, Wei Liu, Ian S. Roth, Albert J. Lamma, Plasma immersion implantation system for materials modification, Surf. Coat. Technol., 136, 138(2001) 6 K.C.Walter, M.Nastasi, N.P.Baker, C.P.Munson, W.K.Scarborough, Advance in PSII techniques for surface modification, Surf. Coat. Technol., 103-104, 205(1998) 7 S.Watanabe, M.Shinohara, H.Kodama, T.Tanaka, M.Yoshida, T.Takagi, Amorphous carbon layers deposition on plastic film by PSII, Thin Solid Films, 420-421, 253(2002) 8 W.Ensinger, K.Volz, K.Baba, R.Hatada, Diamond-like carbon films formed by hydrocarbon plasma immersion ion implantation with methane/toluene mixtures, Instru. Meth. Phys. Res. B., 257, 692(2007) 9 M.Ueda, L.A.Berni, R.M.Castro, Application of plasma immersion ion implantation for improved performance of tools and industrial components, Surf. Coat. Technol., 200, 517(2005) 10 Shu-wen Jiang, Bin Jiang, Yan Li, Yan-rong Li, Guangfu Yin, Chang-qiong Zheng, Friction and wear study of diamond-like carbon gradient coatings on Ti6Al4V substrate prepared by plasma source ion implant-ion beam enhanced deposition. Appl. Surf. Sci., 236, 285(2004) 11 M.Ikeyama, S.Miyagawa, S.Nakao, J.Choi, T.Miyajima, DLC coatings on inner walls of PET bottles by a simplified PBII technique, Instru. Meth. Phys. Res. B., 257, 741(2007) 12 W.Y.Poon, P.Y.Ho Joan, M.Y.Luk Camille, Paul K.Chu, Improvement on corrosion resistance of NiTi orthopedic materials by carbon plasma immersion ion implantation, Instru. Meth. Phys. Res. B., 242, 270(2006) 13 S.Y.Wang, P.K.Chu, B.Y.Tang, Improvement of the corrosion property of Cr4Mo4V bearing steel using plasma immersion ion implantation, Instru. Meth. Phys. Res. B., 127-128, 1000(1997) 14 LIU Hongxi, WANG Langping, WANG Xiaofeng, HUANG Lei, TANG Baoyin, Effects of TiC films on the rolling contact fatigue life and mechanical properties of bearing steel, Acta. Metall. Sin., 42, 1197(2006) (刘洪喜, 王浪平, 王小峰, 黄磊, 汤宝寅, TiC薄膜对轴承钢表面滚动接触疲劳寿命和力学性能的影响, 金属学报, 42, 1197(2006)) 15 K.C.Walter, H.Kung, T.Levine, J.T.Tesmer, P.Kodali, B.P.Wood, D.J.Rej, M.Nastasi, J.Koskinen, J.- P.Hirvonen, Characterization and performance of diamond-like carbon films synthesized by plasma- and ion-beam-based techniques, Surf. Coat. Technol., 74-75, 734(1995) 16 Robertson J. Diamond-like amorphous carbon, Materials Science and Engineering R, 37, 129 (2002) 17 J.Koskonen, A.Anttila, J.P.Hirvonen, Diamond-like carbon coatings by arc-discharge methods, Surf. Coat. Technol., 47, 180(1991) 18 A.LiBassi, A.C.Ferrari, V.Stolojan, B.K.Tanner, J.Robertson, Density, sp3 content and internal layering of DLC films by X-ray reflectivity and electron energy loss spectroscopy, Diamond Relat. Mater., 9, 771(2000)

[1]	王乾, 蒲磊, 贾彩霞, 李志歆, 李俊. 碳纤维/环氧复合材料界面改性的不均匀性[J]. 材料研究学报, 2023, 37(9): 668-674.
[2]	陆益敏, 马丽芳, 王海, 奚琳, 徐曼曼, 杨春来. 脉冲激光沉积技术生长铜材碳基保护膜[J]. 材料研究学报, 2023, 37(9): 706-712.
[3]	冯叶, 陈志勇, 姜肃猛, 宫骏, 单以银, 刘建荣, 王清江. 一种NiCrAlSiY涂层对Ti65钛合金板材循环氧化和室温力学性能的影响[J]. 材料研究学报, 2023, 37(7): 523-534.
[4]	闫春良, 郭鹏, 周靖远, 汪爱英. Cu掺杂非晶碳薄膜的电学性能及其载流子输运行为[J]. 材料研究学报, 2023, 37(10): 747-758.
[5]	陈开旺, 张鹏林, 李树旺, 牛显明, 胡春莲. 莫来石粉末化学镀镍和涂层的高温摩擦学性能[J]. 材料研究学报, 2023, 37(1): 39-46.
[6]	单位摇, 王永利, 李静, 熊良银, 杜晓明, 刘实. 锆合金表面Cr基涂层的耐高温氧化性能[J]. 材料研究学报, 2022, 36(9): 699-705.
[7]	程红杰, 刘黄娟, 姜婷, 王法军, 李文. 近红外反射超疏水黄色涂层的制备和性能[J]. 材料研究学报, 2022, 36(9): 687-698.
[8]	于兴福, 王士杰, 郑冬月, 王全振, 苏勇, 赵文增, 邢飞. 分级固溶处理对8Cr4Mo4V钢的微观组织和硬度的影响[J]. 材料研究学报, 2022, 36(4): 287-297.
[9]	张红亮, 赵国庆, 欧军飞, Amirfazli Alidad. 基于聚多巴胺的超疏水棉织物的一锅法制备及其油水分离性能[J]. 材料研究学报, 2022, 36(2): 114-122.
[10]	崔丽, 孙丽丽, 郭鹏, 马鑫, 王舒远, 汪爱英. 沉积时间对聚醚醚酮表面类金刚石薄膜的结构和性能的影响[J]. 材料研究学报, 2022, 36(11): 801-810.
[11]	李建中, 朱博轩, 王振宇, 赵静, 范连慧, 杨柯. 输尿管支架表面化学接枝镀铜涂层及其性能[J]. 材料研究学报, 2022, 36(10): 721-729.
[12]	李蕊, 王浩, 张天刚, 牛伟. Ti811合金表面激光熔覆Ti₂Ni+TiC+Al₂O₃+Cr_xS_y复合涂层的组织和性能[J]. 材料研究学报, 2022, 36(1): 62-72.
[13]	李修贤, 邱万奇, 焦东玲, 钟喜春, 刘仲武. α籽晶促进低温反应溅射沉积α-Al₂O₃薄膜[J]. 材料研究学报, 2022, 36(1): 8-12.
[14]	范金辉, 李鹏飞, 梁晓军, 梁建平, 徐长征, 蒋力, 叶祥熙, 李志军. 镍-不锈钢复合板轧制过程中界面的结合机制[J]. 材料研究学报, 2021, 35(7): 493-500.
[15]	卢壹梁, 杜瑶, 王成, 辛丽, 朱圣龙, 王福会. 纳米Al₂O₃和TiO₂改性有机硅涂层对304不锈钢高温氧化行为的影响[J]. 材料研究学报, 2021, 35(6): 458-466.

Viewed

Full text

Abstract

Cited

Shared

Discussed