| 1 C.G.Oertel, I.Huensche, W.Skrotzki, W.Knabl, A.Lorich, J.Resch, Plastic anisotropy of straight and cross rolled molybdenum sheets, Materials Science and Engineering, A, 483–484, 79(2008)2 L.J.Ocana, M.Morales, J.A.Porro, J.J.Garcra-ballesteros, C.Correa, Laser shock microforming of thin metal sheets with ns lasers, Physics Procedia, 12, 201(2011)3 M.Marya, G.R.Edwards, A study on the laser forming of near-alpha and metastable beta titanium alloy sheets, Journal of Materials Processing Technology, 108, 376(2001)4 Yoshihiro Sagisakaa, Masayoshi Kamiya, Minoru Matsuda, Yukihiro Ohta, Thin-sheet-metal bending by laser peen forming with femtosecond laser, Journal of Materials Processing Technology, 210, 2304(2010) 5 L.J.Ocana, M.Morales, J.J.Garcra-ballesteros, J.A.Porro, O.Garcra, C.Molpeceres, Laser shock microforming of thin metal sheets, Applied Surface Science, 255, 5633(2009)6 LUO Xinmin, YUAN Chunzhi, REN Xudong, CHEN Kangmin, ZHANG Yongkang, Effect of super-high-strain rate on microstructure of titanium alloy sheet deformed by laser shocking, Transactions of Materials and Heat Treatment, 31(6), 116(2010) (罗新民, 苑春智, 任旭东, 陈康敏, 张永康, 激光冲击超高应变率对钛板形变微结构的影响, 材料热处理学报, 31(6), 116(2010))7 REN Xudong, ZHANG Yongkang, ZHOU Jianzhong, ZHANG Xingquan, LU Jinzhong, Influence of laser parameters on laser shock forming of Ti-6Al-4V alloy, The Chinese Journal of Nonferrous Metals, 16(11), 1850(2006)(任旭东, 张永康, 周建忠, 张兴权, 鲁金忠, 激光参数对Ti6Al4V钛合金激光冲击成形的影响, 中国有色金属学报, 16(11), 1850(2006))8 GAO Changwei, LI Xiangfeng, ZUO Dunwen, WANG Min, ZHANG Yongkang, REN Xudong, The experimental study on the laser shock forming of TC4 titanium alloy sheet, Applied Laser, 25(3), 158(2005)(高长伟, 黎向锋, 左敦稳, 王 珉, 张永康, 任旭东, TC4钛合金板激光冲击成形实验研究, 应用激光, 25(3), 158(2005))9 ZHOU Jianzhong, ZHANG Yongkang, LIU Huixia, YANG Chaojun, FENG Aixing, YIN Sumin, Experiments and FEM analysis of LD31sheet deforming by pulsed laser shocking, Applied Laser, 12(6), 339(2004)(周建忠, 张永康, 刘会霞, 杨超君, 冯爱新, 殷苏民, 脉冲激光冲击LD31薄板变形的实验和数值模拟, 应用激光, 12(6), 339(2004))10 YANG Chaojun, YE Zhen, LU Jinzhong, JIANG Yinfang Jiang, Laser shock forming of SUS304 stainless steel sheet with elliptical spot, Int J Adv Manuf Technol, 56, 987(2011)11 WU Dongjiang, ZHANG Qiang, MA Guangyi, GUO Yuquan, GUO Dongming, Laser bending of brittle materials, Optics and Lasers in Engineering, 48, 405(2010)12 Gary J. CHENG, M. CAI, Dabial Pirzada, Maxime J.-F. Guinel, M.Grant Norton, Plastic deformation in silicon crystal induced by heat-assisted laser shock peening, Journal of Manufacturing Science and Engineering, 130(2), 1(2008)13 P.Peyre, R.Fabbro, P.Merrian, H.P.Lieurade, Laser shockprocessing of aluminum alloys, Application to high cycle fatigue behavior, Materials Science and Engineering, A210(1–2), 102(1996)14 LU Jinzhong, ZHANG Yangkung, GU Wei, KONG Dejun, FENG Aixin, Residual stress of K24 superalloy surface by laser multiple processing, Journal of Jilin University (Engineeringand Technology Edition), 38(2), 309(2008)(鲁金忠, 张永康, 顾 韡, 孔德军, 冯爱新, 激光复合处理超合金表面残余应力, 吉林大学学报(工学版), 38(2), 309(2008))15 ZHANG Yongkang, ZHOU Lichun, REN Xudong, LI Yang, LU Jinzhong, Experiment and finite element analysis on residual stress field in laser shock processing TC4 titanium alloy, Journal of Jiangsu University(Natural Science edition), 30(1), 10(2009)(张永康, 周立春, 任旭东, 李 \ \ 杨, 鲁金忠, 激光冲击TC4残余应力场的试验及有限元分析, 江苏大学学报(自然科学版), 30(1), 10(2009))16 REN Xudong, ZHANG Yongkang, ZHOU Jianzhong, YIN Sumin, KONG Dejun, Study of annealing treatment on residual stresses of titanium alloy during LSP, Chinese Society of Agricultural Machinery, 38(5), 165(2007) (任旭东, 张永康, 周建忠, 殷苏民, 孔德军, 激光冲击钛合金表面退火后的残余应力分布, 农业机械学报, 38(5), 165(2007))17 ZHOU Liucheng, CHEN Donglin, WANG Chen, WANG Wenbing, Prediction of the residual stress relaxation in K417 material after laser shock processing, China Surface Engineering, 22(4), 57(2009)(周留成, 陈东林, 汪 诚, 王文兵, K417材料激光冲击强化残余应力松弛预测, 中国表面工程, 22(4), 57(2009))18 I.Altenberger, E.A.Stach, LIU G, R.K.Nalla, R.O.Ritchie, An in situ transmission electron microscope study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening, Scripta Materialia, 48, 1593(2003) |
