1 C.P.Paul, H.Alemohammad, E.Toyserkani, A.Khajepour, S.Corbin, Cladding ofWC–12 Co on low carbon steel using a pulsed Nd: YAG laser, Materials Science and Engineering

A, 464, 170(2007)

2 Gerhard Gille, J. Bredthauer, B. Gries, Advanced and new grades of WC and binder powder–their properties and application, International Journal of Refractory Metals & Hard Materials, 18, 87(2000)

3 R.Polini, M.Delogu, G.Marcheselli, Adherent diamond coatings on cemented tungsten carbide substrates with new Fe/Ni/Co binder phase, Thin Solid Films, 494, 133(2006)

4 O.O.Eso, FAN Peng, Z.Z.Fang, A kinetic mould for cobalt gradient formation during liquid phase sintering of functionally graded WC–Co, International Journal of Refractory Metals & Hard Materials, 26, 91(2008)

5 LIU Xuemei, SONG Xiaoyan, ZHANG Jiuxing, ZHAO Shixian, Temperature distribution and neck formation of WC—-Co combined particles during spark plasma sintering, Materials Science and Engineering A, 488, 1(2008)

6 Mark Fitzsimmons, Vinod K. Sarin, Development of CVD WC–Co coatings, Surface and Coatings Technology, 137, 158(2001)

7 G.Bolelli, B.Bonferroni, G.Coletta, L.Lusvarghi, F.Pitaccol, Wear and corrosion behavior of HVOF WC–CoCr/CVD DLC hybrid coating systems deposited onto aluminum substrate, Surface and Coatings Technology, 205, 4211(2011)

8 YE Cheng, DU Xiaodong, YANG Haoyu, Analysis of microstructure and properties of particles reinforced cladding layer on the steel surface, Chinese journal of materials research, 26(1), 55(2012)

(叶 诚, 杜晓东, 杨皓宇, 钢表面颗粒增强熔覆层的组织和性能, 材料研究学报, 26(1), 55(2012))

9 Zulai Li, Yehua Jiang, Rong Zhou, Dehong Lu, Rongfeng Zhou. Dry three–body abrasive wear behavior ofWC reinforced iron matrix surface composites produced by V–EPC infiltration casting process, Wear, 262, 649(2007)

10 HAN Dewei, TIAN Rongzhang, Measurement Technique Handbook of Metal Hardness (Changsha, Central South University Press, 2003) p.337

(韩德伟, 田荣章,  金属硬度检测技术手册 (长沙, 中南大学出版社, 2003) p.337)

11 CUI Zhongqi, Metallography and Heat Treatment (Beijing, China Machine Press, 2000) p.236

(崔忠圻,  金属学与热处理  (北京, 机械工业出版社, 2000) p.236)

12 G.S.Upadhyaya, Cemented Tungsten Carbides: Production, Properties, and Testing, (New Jersey, Noyes Publications, 1998) p.7

13 D.V.Suetin, I.R.Shein, A.L.Ivanovskii, Structural, electronic and magnetic properties of η carbides (Fe3W3C, Fe6W6C, Co3W3C and Co6W6C) from first principles calculations, Physical B, 403, 2654(2008)

14 XIAO Yifeng, HE Yuehui, FENG Ping, XIE Hong, ZHANG Lijuan, HUANG Ziqian, HUANG Baiyun, Effects of carbon content on microstructure and properties of carbon–deficient cemented carbides, The Chinese Journal of Nonferrous Metals, 17(1), 39(2007)

(肖逸锋, 贺跃辉, 丰 平, 谢 宏, 张丽娟, 黄自谦, 黄伯云, 碳含量对缺碳硬质合金组织和性能的影响, 中国有色金属学报,  17(1), 39(2007))

15 LI Wenbo, YANG Yi, LIU Jian, YANG Gang, Effect of heating rate on sintering behavior of WC–Co cemented carbide under an electric field, Transactions of Materials and Heat Treatment, 31(8), 34(2010)

(李文波, 杨 屹, 刘 剑, 杨 刚, 升温速度对电场烧结硬质合金的影响, 材料热处理学报,  31(8), 34(2010))

16 J.A.Dean, Lange’s Handbook of Chemistry, 11th edition (Beijing, Science Press, 1991) p.4–40

(J.A.迪安,  兰氏化学手册, 11版(北京, 科学出版社, 1991) p.4--40)

17 A.Z.Antoni, J.Y.Shen, M.C.Durand, About one stable and three metastable eutectic microconstituents in the Fe–W– C system, International Journal of Refractory Metals & Hard Materials, 26, 372(2008)

18 B.Reichel, K.Wagner, D.Janisch, W.Lengauer, Alloyed W—(Co, Ni, Fe)—C phases for reaction sintering of hardmetals, International Journal of Refractory Metals & Hard Materials, 28, 638(2010)

19 D.V.Shtansky, G.Inden, Phase transformation in Fe–Me– C and Fe–W–C steel–I. the structural evolution during tempering at 700 , Acta Material, 45, 2861(1997)