Please wait a minute...
材料研究学报  2008, Vol. 22 Issue (4): 405-410    
  论文 本期目录 | 过刊浏览 |
PNIPAAm共聚水凝胶的微波合成和性能
赵祯霞;李忠;夏启斌;徐金芳
华南理工大学化工与能源学院传热强化与过程节能教育部重点实验室
;;;;;
华南理工大学化工与能源学院传热强化与过程节能教育部重点实验室
引用本文:

赵祯霞; 李忠; 夏启斌; 徐金芳 . PNIPAAm共聚水凝胶的微波合成和性能[J]. 材料研究学报, 2008, 22(4): 405-410.
, , , . [J]. Chin J Mater Res, 2008, 22(4): 405-410.

全文: PDF(1074 KB)  
摘要: 用微波辐射法合成了PNIPAAm共聚水凝胶, 表征和测定了孔隙结构、形貌、溶胀和退溶胀速度. 结果表明: 与水热法相比, 用微波辐射法合成的共聚水凝胶孔结构发达; 在低于LCST下的溶胀率可达538, 远远超过普通水浴法所得的共聚水凝胶的溶胀率; 用微波辐射法所合成的PNA系列水凝胶具有比PNIPAAm更高的溶胀和退溶胀速度. 微波辐射条件下特殊的“热效应”和“非热效应” 有助于合成具有多孔结构网络的共聚水凝胶. 这种孔结构有利于水分子的储存和扩散, 提高了它的平衡溶胀率和水凝胶对环境温度的响应速度.
关键词 有机高分子材料微波辐射孔结构    
Key words
收稿日期: 2007-09-02     
ZTFLH:  TB324  
1 S.Wu,J.D.Jorgensen,A.D.Skaja,J.P.Williams,Effects of sulphonic and phosphonic acrylic monomers on the crosslinking of acrylic latexes with cycloaliphatic epoxide, Prog.Org.Coat,36,21(1999)
2 ZHANG Jiantao,HUANG Shiwen,XUE Yanan,Zhuo Renxi,Effect of PEG as pore-forming agents on the prow erties of porous poly(N-isopropylacylamide-co-Acrylic Acid)hydrogels,Acta.Polym.Sin.,3,418(2006) (张建涛,黄世文,薛亚楠,卓仁禧,PEG作为成孔剂对聚(N-异丙基丙烯酰胺-co-丙烯酸)水凝胶性能的影响,高分子学报,3,418(2006))
3 J.T.Zhang,S.X.Cheng,S.W.Huang,R.X.Zhuo,Tempera- ture-sensitive poly(N-isopropylacrylamide)hydrogels with macroporous,structure and fast response rate, Macromol Rapid Comunn,24,447(2003)
4 T.G.Park,A.S.Hoffman,Poly-(N-isopropylacrylamide): experiment,theory and application,J.Apply Poly.Sci., 17,163(1992)
5 X.Z.Zhang,Ren-Xi Zhuo,Synthesis dynamic properties of temperature-sensitive poly(N-isopropylacrylamide)gel cross-linked through siloxane linkage,Langmuir,17, 12(2001)
6 L.M.Eder,L.C.Angel,C.B.Jose Manuel,F.A.Karl,Effect of method of preparation on properties of temperature and pH-sensitive gels:chemical crosslinking versus irradi- ation with e-beam,Reactive & Functional Polymers,67, 67(2007)
7 H.Feil,Y.H.Bae,J.Feijan,S.W.Kim,Effect of comonomer hydrophilicity and ionization on the lower critical solu- tion temperature of N-Isopropylacrylamide copolymers, Macromolecules,26,2496(1993)
8 E.S.Mallakapour,A.Z.Hajipour,S.Khoee,Principle of mi- crowave chemistry and application of microwave technique in material chemistry,J Polym Sci,Part A:Polym Chem, 38,1154(2000)
9 T.R.Matzelle,D.A.Ivanov,D.Landwehr,L.A.Heinrich, R.Reichelt,N.Kruse,Micromechanical properties of“smart”gels:studies by scanning force and scanning elec- tron microscopy of PNIPAAm,J.Phys.Chem.B,106, 2861(2002)
10 M.R.Guilherme,R.D.Silva,A.F.Rubira,Thermo-sensitive hydrogels membranes from PAAm networks and entangled PNIPAAm:effect of temperature,cross-linking and PNI- PAAm contents on the water uptake and permeability, Reactive Functional Polymer,61,233(2004)
11 C.F.Yi,Z.W.Deng,Z.S.Xu,Development of studies on polymerization by microwave irradiation,Polymer Bul- letin,2,30(2004) (易昌凤,邓字巍,徐祖顺,微波辐射用于聚合反应的研究进展,高分子通报,2,30(2004))
12 J.T.Zhang,S.X.Cheng,R.X.Zhuo,Preparation of macro- porous poly(N-isopropylacrylamide)hydrogel with im- proved temperature sensitivity,J.Polym.Sci.Part A: Polym.Chem.,41,2390(2003)
13 X.H.Liu,X.G.Wang,D.H.Liu,Recent development of the research on the structure effects and responsive mechanism of intelligent hydrogels,Chemistry,10,1(2000) (刘晓华,王晓工,刘德山,智能型水凝胶结构及响应机理的研究进展,化学通报,10,1(2000))
14 Y.Hirokawa,T.Tanaka,Volume phase transition in a non- ionic gel,J Chem Phys.,81,6379(1984)
15 G.X.Tan,Y.D.Cui,The stuey of polymer hydrogels on thermresponsive and pH-sensitive,Journal of Functional Materials,35,524(2004) (谭帼馨,崔英德,共聚物水凝胶温度及pH敏感行为的研究,功能材料,35,524(2004))
16 H.Kawaguchi,Functional polymer microspheres,Prog. Polym Sci.,25,1171(2000)
17 T.Tanaka,D.J.Fillmore,S.T.Sun,L Nishio,G Swislow,A shah,Phase transition in ionic gels,A.Phys.Rev.Lett., 45,1636(1980)
18 K.Norihiro,S.Yasuzo,S.Shihoko,Wide-range con- trol of deswelling time for thermosensitive poly(N- isopropylacrylamide)gel treated by freeze-drying,Macro- molecules,36,961(2003)
[1] 李海龙, 牟娟, 王媛媛, 葛绍璠, 刘春明, 张海峰, 朱正旺. MnNiCoCrFe多孔高熵合金的电催化析氧性能[J]. 材料研究学报, 2023, 37(5): 332-340.
[2] 叶姣凤, 王飞, 左洋, 张钧翔, 罗晓晓, 冯利邦. 兼具高强度、高韧性和自修复性能的环氧树脂改性热可逆聚氨酯[J]. 材料研究学报, 2023, 37(4): 257-263.
[3] 李瀚楼, 焦晓光, 朱欢欢, 赵晓欢, 矫庆泽, 冯彩虹, 赵芸. 支链含氟聚酯的合成和性能[J]. 材料研究学报, 2023, 37(4): 315-320.
[4] 马逸舟, 赵秋莹, 杨路, 裘进浩. 热塑型聚酰亚胺/聚偏氟乙烯全有机复合薄膜的制备及其介电储能[J]. 材料研究学报, 2023, 37(2): 89-94.
[5] 殷洁, 胡云涛, 刘慧, 杨逸霏, 王艺峰. 基于电沉积技术构建聚苯胺/海藻酸膜及电化学性能研究[J]. 材料研究学报, 2022, 36(4): 314-320.
[6] 申延龙, 李北罡. 磁性氨基酸功能化海藻酸铝凝胶聚合物的制备及对偶氮染料的超强吸附[J]. 材料研究学报, 2022, 36(3): 220-230.
[7] 龙庆, 王传洋. 不同碳黑含量PMMA的热降解行为和动力学分析[J]. 材料研究学报, 2022, 36(11): 837-844.
[8] 蒋平, 吴丽华, 吕太勇, José Pérez-Rigueiro, 王安萍. 蜘蛛大壶状腺丝的反复拉伸力学行为和性能[J]. 材料研究学报, 2022, 36(10): 747-759.
[9] 鄢俊, 杨进, 王涛, 徐桂龙, 李朝晖. 有机硅油改性水性酚醛的制备及其性能[J]. 材料研究学报, 2021, 35(9): 651-656.
[10] 张昊, 李帆, 常娜, 王海涛, 程博闻, 王攀磊. 羧酸型接枝淀粉吸附树脂的制备和对染料的去除性能[J]. 材料研究学报, 2021, 35(6): 419-432.
[11] 孙丽颖, 钱建华, 赵永芳. AgNWs-TPU/PVDF柔性薄膜电容传感器的制备和性能[J]. 材料研究学报, 2021, 35(6): 441-448.
[12] 唐开元, 黄洋, 黄湘舟, 葛颖, 李娉婷, 袁凡舒, 张威威, 孙东平. 碳化细菌纤维素的理化性质及其在甲醇电催化中的应用[J]. 材料研究学报, 2021, 35(4): 259-270.
[13] 苏晨文, 张婷玥, 郭丽伟, 李乐, 杨苹, 刘艳秋. 用于模拟细胞外基质的硫醇-烯水凝胶的制备[J]. 材料研究学报, 2021, 35(12): 903-910.
[14] 张向阳, 章奇羊, 汤涛, 郑涛, 柳浩, 刘国金, 朱海霖, 朱海峰. 基于MOFs的复合材料制备及其对亚甲基蓝染料的吸附性能[J]. 材料研究学报, 2021, 35(11): 866-872.
[15] 万里鹰, 肖洋, 张伦亮. 基于热可逆Diels-Alder动态共价键PU-DA体系的制备和性能[J]. 材料研究学报, 2021, 35(10): 752-760.