Please wait a minute...
材料研究学报  2004, Vol. 18 Issue (4): 337-342    
  论文 本期目录 | 过刊浏览 |
NiCr合金在KCl--ZnCl{2}$盐膜下含氯氧化性气氛中的腐蚀
张轲;牛焱;吴维tao
中国科学院金属研究所
Corrosion of NiCr alloys in oxidizing atmosphere containing HCl induced by KCl--ZnCl$_{2}$ salt deposit
;;
中国科学院金属研究所
引用本文:

张轲; 牛焱; 吴维tao . NiCr合金在KCl--ZnCl{2}$盐膜下含氯氧化性气氛中的腐蚀[J]. 材料研究学报, 2004, 18(4): 337-342.

全文: PDF(1721 KB)  
摘要: 研究了纯Ni、纯Cr以及3种不同Cr含量的NiCr合金在600℃KCl--ZnCl$_{2}$ 盐膜下含氯氧化性气氛中的腐蚀行为. 结果表明, 5种材料均发生了严重的加速腐蚀. 在材料表面形成了多孔的氧化膜, 并发生了开裂, 在氧化膜与基体金属的界面处有金属氯化物生成. NiCr合金的腐蚀增质比纯Ni和纯Cr的小. Ni50Cr和纯Cr有较高的腐蚀速度, 前者与其具有的双相组织有关, 后者是其氧化膜易脱落所致. 材料的加速腐蚀机制是氯化物蒸汽的气相输运加速了金属离子向外扩散速度的‘活化氧化’.
关键词 材料失效与保护NiCr合金高温氧化KCl-ZnC    
Abstract:The corrosion of pure nickel and chromium and of three NiCr alloys containing 10\%, 25\% and 50\% Cr in a HCl--containing oxidizing atmosphere with KCl--ZnCl$_{2}$ deposit at 600℃ was investigated. All the materials suffer from accelerated corrosion with respect to their corrosion in the same atmosphere in the absence of chloride deposit. In particular, both metals corroded more quickly than the three NiCr alloys especially during the initial stage. The scales formed on the five materials were very porous with cracks and composed of oxides or/and chlorides of both metals as well as some Cr--Zn/K spinel. Moreover, the chlorides of both metals were found at the metal--or alloy--scale interface. Finally, the corrosion mechanism was discussed in terms of accelerated oxidation induced by chlorides.
Key wordsmaterials failure and protection    NiCr alloys    high temperature oxidation    KCl-ZnCl2 saltdeposit    HCl-co
收稿日期: 2004-08-31     
ZTFLH:  TB304  
1 R.Prescott, F.H.Stott, P.Elliott, Corrosion Sciences, 29(4) , 465(1989)
2 M.Spiegel, Materials and Corrosion, 50, 373(1999)
3 H.J.Grabke, E.Reese, M.Spiegel, Corrosion Sciences, 37(7) , 1023(1995)
4 H.H.Krause, I.G.Wright, V.K.Sethl, Heat-Resistant Materials, Proceedings of the First International Con-ference, Fontana, Wisconsin (USA/23-26 Sep. 1991) p.623
5 Y.Shinata, F.Takahashi, K.Hashiura, Materials Science and Engineering, 87, 399(1987)
6 LI Yuanshi, NIU Yan, LIU Gang, WU Weitao, Corrosion Sciences & Protection Technology, 12, 224(2000) (李远士,牛焱,刘刚,吴维(山文),腐蚀科学与防护技术,12, 224(2000) )
7 M.J.McNallan, W.W.Liang, J.M.Oh, C.T.Kang, Oxidation of Metals, 17, 371(1982)
8 A.Zahs, M.Spiegel, H.J.Grabke, Materials and Corrosion, 50, 561(1999)
发“9 V.A.C.Haanappel, T.Fransen, P.J.Gellings, High Temperature Materials and Processes, 10(2) , 92(1992)
[1] 高巍, 刘江南, 魏敬鹏, 要玉宏, 杨巍. TC4钛合金表面氧化亚铜掺杂微弧氧化层的结构和性能[J]. 材料研究学报, 2022, 36(6): 409-415.
[2] 杨留洋, 谭卓伟, 李同跃, 张大磊, 邢少华, 鞠虹. 利用WBEEIS测试技术对管道缺陷区动态冲刷腐蚀行为的研究[J]. 材料研究学报, 2022, 36(5): 381-391.
[3] 陈铮, 杨芳, 王成, 杜瑶, 卢壹梁, 朱圣龙, 王福会. 惰性无机填料比例和颗粒尺寸对纳米Al/Al2O3 改性有机硅涂料抗高温氧化行为的影响[J]. 材料研究学报, 2022, 36(4): 271-277.
[4] 李玉峰, 张念飞, 刘丽爽, 赵甜甜, 高文博, 高晓辉. 含磷石墨烯的制备及复合涂层的耐蚀性能[J]. 材料研究学报, 2022, 36(12): 933-944.
[5] 李刚, 温影, 于中民, 刘囝, 熊梓连. Al含量对CrFeNiAlxSi系高熵合金性能的影响[J]. 材料研究学报, 2021, 35(9): 712-720.
[6] 陈艺文, 王成, 娄霞, 李定骏, 周科, 陈明辉, 王群昌, 朱圣龙, 王福会. 无机复合涂层对CB2铁素体耐热钢在650℃水蒸气中的防护[J]. 材料研究学报, 2021, 35(9): 675-681.
[7] 唐荣茂, 刘光明, 刘永强, 师超, 张帮彦, 田继红, 甘鸿禹. 用电化学噪声技术研究Q235钢在含氯盐模拟混凝土孔隙液中的腐蚀行为[J]. 材料研究学报, 2021, 35(7): 526-534.
[8] 卢壹梁, 杜瑶, 王成, 辛丽, 朱圣龙, 王福会. 纳米Al2O3TiO2改性有机硅涂层对304不锈钢高温氧化行为的影响[J]. 材料研究学报, 2021, 35(6): 458-466.
[9] 张大磊, 魏恩泽, 荆赫, 杨留洋, 豆肖辉, 李同跃. 超级铁素体不锈钢表面超疏水结构的制备及其耐腐蚀性能[J]. 材料研究学报, 2021, 35(1): 7-16.
[10] 王冠一, 车欣, 张浩宇, 陈立佳. Al-5.4Zn-2.6Mg-1.4Cu合金板材的低周疲劳行为[J]. 材料研究学报, 2020, 34(9): 697-704.
[11] 黄安然, 张伟, 王学林, 尚成嘉, 范佳杰. 铁素体不锈钢在高温尿素环境中的腐蚀行为研究[J]. 材料研究学报, 2020, 34(9): 712-720.
[12] 公维炜, 杨丙坤, 陈云, 郝文魁, 王晓芳, 陈浩. 扫描电化学显微镜原位观察碳钢涂层缺陷处的交流腐蚀行为[J]. 材料研究学报, 2020, 34(7): 545-553.
[13] 郭铁明, 徐秀杰, 张延文, 宋志涛, 董志林, 金玉花. Q345q桥梁钢和Q345qNH耐候钢在模拟工业大气+除冰盐混合介质中的腐蚀行为[J]. 材料研究学报, 2020, 34(6): 434-442.
[14] 朱金阳, 谭成通, 暴飞虎, 许立宁. 一种新型含AlCr合金钢在模拟油田采出液环境下的CO2腐蚀行为[J]. 材料研究学报, 2020, 34(6): 443-451.
[15] 梁新磊, 刘茜, 王刚, 王震宇, 韩恩厚, 王帅, 易祖耀, 李娜. 氧化石墨烯改性环氧隔热涂层的耐蚀和隔热性能研究[J]. 材料研究学报, 2020, 34(5): 345-352.