Please wait a minute...
Chin J Mater Res  2004, Vol. 18 Issue (2): 167-170    DOI:
Research Articles Current Issue | Archive | Adv Search |
Oxidation and corrosion behaviors of NdFeB Magnet prepared by spark plasma sintering
;;;;
北京工业大学材料学院功能材料研究所
Cite this article: 

. Oxidation and corrosion behaviors of NdFeB Magnet prepared by spark plasma sintering. Chin J Mater Res, 2004, 18(2): 167-170.

Download:  PDF(1343KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Anisotropic NdFeB magnet was prepared by spark plasma sintering(SPS) technique. Magnet with same composition was produced using conventional sintering method for comparison. The electrochemical properties in electrolytes and reaction kinetics in oxidizing environments of the magnets were studied. The microstructures and compositions of the magnets were observed with scanning electron microscope and energy dispersive X--ray detector. Compared with conventional sintered NdFeB magnet, the SPS processed magnet has an original microstructure, i.e. the grain size of the Nd$_{2}$Fe$_{14}$B main phase is fine and uniform, and the fine Nd--rich phase does not form along the grain boundaries of main phase, but agglomerates into the triple junctions. Therefore, the pathways for corrosion propagation are restricted and the inter--granular corrosion process is suppressed effectively. As a result, the SPS NdFeB magnet possesses an excellent corrosion resistance.
Key words:  materials failure and protection      corrosion resistance      spark plasma sintering(SPS)      NdFeB magnet      
Received:  21 May 2004     
ZTFLH:  TG178  
  TM271  
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2004/V18/I2/167

1 M.Honshima, K.Ohashi, Journal of Materials Engineering and Performance 3(2) , 218(1994)
2 G.Yan,A.J.Williams, J.P.G.Farr, I.R.Harris, Journal of Alloys and Compounds,292,266(1999)
3 F.E.Camp,A.S.Kim,J.Appl.Phys.,70,6348(1991)
4 D.F.Cygan,M.J.McNallan,Journal of Magnetism and Magnetic Materials,139,131(1995)
5 B.M.Ma,D.Lee,B.Smith,IEEE Transactions on Magnetics,37,2479(2001)
6 V.Mamedov,Powder Metallurgy,45(4) ,322(2002)
7 YUE Ming, WANG Gongping,ZHANG Jiuxing,LI Tao,XIAO Yaofu,WANG Run, Journal of Functional Materials and Devices, 9(3) , 295(2003) (岳明,王公平,张久兴,李涛,肖耀福,王润,功能材料与器件学报,9(3) ,295(2003) )
8 M.Sagawa, S.Fujimura, N.Togawa, Y.Matsuura,J. Appl. Phys., 55, 2083(1984)
[1] LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[2] LIAO Hongyu, JIA Yongxin, SU Ruiming, LI Guanglong, QU Yingdong, LI Rongde. Effect of Retrogression Times on Microstructure and Corrosion Resistance of 2024 Aluminum Alloy[J]. 材料研究学报, 2023, 37(4): 264-270.
[3] CHEN Jie, LI Hongying, ZHOU Wenhao, ZHANG Qingxue, TANG Wei, LIU Dan. Effect of Heat Input on Low Temperature Toughness and Corrosion Resistance of Q1100 Steel Welded Joints[J]. 材料研究学报, 2022, 36(8): 617-627.
[4] GAO Wei, LIU Jiangnan, WEI Jingpeng, YAO Yuhong, YANG Wei. Structure and Properties of Cu2O Doped Micro Arc Oxidation Coating on TC4 Titanium Alloy[J]. 材料研究学报, 2022, 36(6): 409-415.
[5] YANG Liuyang, TAN Zhuowei, LI Tongyue, ZHANG Dalei, XING Shaohua, JU Hong. Dynamic Corrosion Behavior of Pipeline Defects Characterized by WBE and EIS Testing Techniques[J]. 材料研究学报, 2022, 36(5): 381-391.
[6] LI Yufeng, ZHANG Nianfei, LIU Lishuang, ZHAO Tiantian, GAO Wenbo, GAO Xiaohui. Preparation of Phosphorus-containing Graphene and Corrosion Resistance of Composite Coating[J]. 材料研究学报, 2022, 36(12): 933-944.
[7] CHEN Yiwen, WANG Cheng, LOU Xia, LI Dingjun, ZHOU Ke, CHEN Minghui, WANG Qunchang, ZHU Shenglong, WANG Fuhui. Protective Performance of a Novel Inorganic Composite Coatings on CB2 Ferritic Heat Resistant Steel at 650℃ in Oxygen Flow with Water Vapor[J]. 材料研究学报, 2021, 35(9): 675-681.
[8] LI Lingmei, HUANG Huizhen, ZHANG Qinghuan, SHUAI Gewang. Effect of P on Properties of Sn-9Zn-0.1S Lead-Free Solder[J]. 材料研究学报, 2021, 35(8): 615-622.
[9] HAO Xinxin, XI Tong, ZHANG Hongzhen, YANG Chunguang, YANG Ke. Effect of Quenching Temperature on Microstructure and Properties of Cu-bearing 5Cr15MoV Martensitic Stainless Steel[J]. 材料研究学报, 2021, 35(12): 933-941.
[10] ZHANG Dalei, WEI Enze, JING He, YANG Liuyang, DOU Xiaohui, LI Tongyue. Construction of Super-hydrophobic Structure on Surface of Super Ferritic Stainless Steel B44660 and Its Corrosion Resistance[J]. 材料研究学报, 2021, 35(1): 7-16.
[11] WANG Guanyi, CHE Xin, ZHANG Haoyu, CHEN Lijia. Low-cycle Fatigue Behavior of Al-5.4Zn-2.6Mg-1.4Cu Alloy Sheet[J]. 材料研究学报, 2020, 34(9): 697-704.
[12] HUANG Anran, ZHANG Wei, WANG Xuelin, SHANG Chengjia, FAN Jiajie. Corrosion Behavior of Ferritic Stainless Steel in High Temperature Urea Environment[J]. 材料研究学报, 2020, 34(9): 712-720.
[13] GONG Weiwei, YANG Bingkun, CHEN Yun, HAO Wenkui, WANG Xiaofang, CHEN Hao. In Situ SECM Observation of Corrosion Behavior of Carbon Steel at Defects of Epoxy Coating under AC Current Conditions[J]. 材料研究学报, 2020, 34(7): 545-553.
[14] ZHU Jinyang, TAN Chengtong, BAO Feihu, XU Lining. CO2 Corrosion Behaviour of A Novel Al-containing Low Cr Steel in A Simulated Oilfield Formation Water[J]. 材料研究学报, 2020, 34(6): 443-451.
[15] LIANG Xinlei, LIU Qian, WANG Gang, WANG Zhenyu, HAN En-Hou, WANG Shuai, YI Zuyao, LI Na. Study on Corrosion Resistance and Thermal Insulation Properties of Graphene Oxide Modified Epoxy Thermal Insulation Coating[J]. 材料研究学报, 2020, 34(5): 345-352.
No Suggested Reading articles found!