|
|
|
| 30Cr2Ni4MoV钢铸态加热过程中奥氏体晶粒的长大行为* |
党淑娥1( ),宿展宁1,刘志龙2,何艳1,赵禛1,刘燕1 |
1. 太原科技大学材料科学与工程学院 太原 030024
2. 山西省产品质量监督检验研究院 太原 030012 |
|
| Austenite Grain Growth Behavior During Heating Process of As-cast 30Cr2Ni4MoV Steel |
| Shue DANG1,**(),Zhanning SU1,Zhilong LIU2,Yan HE1,Zhen ZHAO1,Yan LIU1 |
1. School of Materials Science and Technology, Taiyuan University of Science and Technology, Taiyuan 030024
2. Shanxi Province Institute of Product Quality Supervision and Inspection, Taiyuan 030012 |
引用本文:
党淑娥,宿展宁,刘志龙,何艳,赵禛,刘燕. 30Cr2Ni4MoV钢铸态加热过程中奥氏体晶粒的长大行为*[J]. 材料研究学报, 2014, 28(9): 675-681.
Shue DANG,
Zhanning SU,
Zhilong LIU,
Yan HE,
Zhen ZHAO,
Yan LIU.
Austenite Grain Growth Behavior During Heating Process of As-cast 30Cr2Ni4MoV Steel[J]. Chinese Journal of Materials Research, 2014, 28(9): 675-681.
| 1 | KONG Yonghua,HU Huabin, LI Dongfang, CHEN Guosheng, ZHU Shigen, Study on grain growth of hot continuous rolled GH4169 superalloy, Rare Metal Materials and Engineering, 41(5), 877(2012) | | 1 | 孔永华, 胡华斌, 李东方, 陈国胜, 朱世根, 热连轧GH4169合金的晶粒长大行为, 稀有金属材料与工程, 41(5), 877(2012) | | 2 | SU Deda,Austenitic grain growth and grain boundary remove, Steel Wire Products, 30(5), 52(2004) | | 2 | (苏德达, 奥氏体晶粒长大与晶界迁移, 金属制品, 30(5), 52(2004)) | | 3 | C. M. Sellars, J. A. Whiteman,Recrystallization and grain growth in hot rolling, Metal Science, 13(3-4), 187(1979) | | 4 | LI Dingqiang,HU Delin, JIA Dongsheng, Study on the tendency of austenite grain growth in 20Cr2Ni4A steel, Heat Treatment of Metals, 1993(6), 16(1993) | | 4 | 郦定强, 胡德林, 贾东升, 20Cr2Ni4A钢奥体晶粒长大倾向的研究, 金属热处理, 1993(6), 16(1993) | | 5 | SUN Shuli,HE Wenwu, ZHANG Mingang, GUO Huiguang, Grain growth rule of austenite grain in the heating process of P92 heat-resistant steel, Journal of Plasticity Engineering, 20(3), 92(2013) | | 5 | 孙述利, 何文武, 张敏刚, 郭会光, P92耐热钢加热过程中奥氏体晶粒长大规律, 塑性工程学报, 20(3), 92(2013) | | 6 | YE Xiaoying, DONG Jianxin, ZHANG Maicang, Cold deformation of GH738 alloy and its recrystallization behavior during intermediate annealing, Rare Metal Materials and Engineering, 42(7), 1423(2013) | | 6 | 叶校瑛, 董建新, 张麦仓, GH738合金冷变形及中间退火再结晶行为研究, 稀有金属材料与工程, 42(7), 1423(2013) | | 7 | SU Deda,Influence of original structures on austenitic grain growth of T10A steel, Steel Wire Products, 30(4), 45(2004) | | 7 | (苏德达, 原始组织对T10A钢奥氏体晶粒长大的影响, 金属制品, 30(4), 45(2004)) | | 8 | LIU Zongchang, Transformation Principle of Material Microstructure, (Beijing: Metallurgical Industry Press, 2006) p.100 | | 8 | 刘宗昌, 材料组织结构转变原理, (北京: 冶金工业出版社, 2006) p.100 | | 9 | LIU Zhilong, Study on as-cast microstructure evolution during blocking process of 30Cr2Ni4MoV Steel,(Taiyuan: University of Science and Technology of Taiyuan, 2013) p.21 | | 9 | 刘志龙, 30Cr2Ni4MoV钢制坯过程铸态组织演变规律研究,(太原: 太原科技大学, 2013) p.21 | | 10 | MAO Weimin, ZHAO Xinbing, Metal Recrystallization and Grain Growth(Beijing, Metallurgical Industry Press, 1994) p.236 | | 10 | 毛卫民, 赵新兵, 金属的再结晶与晶粒长大 (北京, 冶金工业出版社, 1994) p.236 | | 11 | E. Anelli,Application of mathematical modelling to hot rolling and controlled cooling of wire rods and bars, ISIJ International, 32(3), 440(1992) | | 12 | CHEN Liqing,SUI Fengli, LIU Xianghua, Grain growth model of Inconel 718 alloy forged slab in reheating process prior to rough rolling, Acta Metallurgica Sinica, 45(10), 1242(2009) | | 12 | (陈礼清, 隋凤利, 刘相华,Inconel 718合金方坯粗轧加热过程晶粒长大模型, 金属学报, 45(10), 1242(2009)) |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
