Please wait a minute...
材料研究学报  2010, Vol. 24 Issue (4): 363-367    
  研究论文 本期目录 | 过刊浏览 |
碳气凝胶载铂催化剂对甲醇的电催化氧化性能
郭志军1, 朱红2, 张新卫1, 王芳辉2, 郭玉宝1
1.北京交通大学理学院 北京100044
2.北京化工大学理学院 北京 100029  
Carbon Aerogel Supported Pt Catalyst for Electrocatalytic Oxidation of Methanol
GUO Zhijun1, ZHU Hong2, ZHANG Xinwei1,  WANG Fanghui2,  GUO Yubao1  
1.School of Science, Beijing Jiaotong University, Beijing, 100044
2.School of Science, Beijing University of Chemical Technology, Beijing 100029
引用本文:

郭志军 朱红 张新卫 魏永生 王芳辉 郭玉宝. 碳气凝胶载铂催化剂对甲醇的电催化氧化性能[J]. 材料研究学报, 2010, 24(4): 363-367.
, , , , , . Carbon Aerogel Supported Pt Catalyst for Electrocatalytic Oxidation of Methanol[J]. Chin J Mater Res, 2010, 24(4): 363-367.

全文: PDF(961 KB)  
摘要: 

以用溶胶凝胶法制备的碳气凝胶(CA)作为催化剂载体, 用间歇微波法制备了碳气凝胶载铂催化剂。用电感耦合等离子光谱仪(ICP)测定了催化剂中Pt的含量, 用透射电镜(TEM)和X射线衍射(XRD)对催化剂的形貌、粒径分布以及颗粒粒度进行了表征。 结果表明, 碳气凝胶载铂催化剂粒子分布均匀、粒径集中, 平均粒经为4 nm。用能量散射X射线能谱(EDX)分析了催化剂的化学成分, 用循环伏安法、线形扫描伏安法和计时电流法对催化剂的电化学性能进行了表征。结果表明, 以碳气凝胶为载体的催化剂比以活性炭为载体的催化剂具有更高的催化活性。

关键词 无机非金属材料  催化剂  碳气凝胶  催化性能    
Abstract

Carbon aerogel (CA) as the catalyst support was synthesized via a sol-gel process. Pt/CA catalysts were prepared by intermittent microwave-assisted polyol process. The content of Pt was measured by inductively coupled plasma (ICP). The results of X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements show that the catalyst particles distributed homogeneously. The mean particle size of Pt/CA is about 4 nm. The chemical contents of the catalysts were analyzed using energy diffraction X-ray(EDX)spectroscopy. The electrochemical property of carbon aerogel supported Pt catalyst for methanol oxidation was evaluated by cyclic voltammetry (CV), linear-sweep voltammetry (LSV), and chronoamperometry. The results of electrochemical measurements show that the activity of Pt/CA catalyst is better than that of Pt/C catalyst.

Key wordsinorganic non-metallic materials     catalyst     carbon aerogel     catalytic performance
收稿日期: 2010-05-05     
ZTFLH: 

TM911

 
基金资助:

国家自然科学基金20876013, 国家自然科学基金重点20636060和国际科技合作2009DFA63120资助项目。

1 V.M.Barragan, A.Heinzel, Estimation of the membrane methanol diffusion coefficient from open circuit voltage measurements in a direct methanol fuel cell, Journal of power sources, 104(1),66(2002) 2 J.Larminie, A.Dicks, Zhu Hong, Fuel Cell Systems Explained, (Beijing, Science Press, 2006) p.55 3 R.W. Pekala,Low density resorcinol-formaldehyde aerogels,USA Patent 4873218(1989) 4 R. Saliger, U.Fischer, C.Herta, J.Fricke, High surface area carbon aerogels for supercapacitors, Journal of Non-crystalline Solids, 225(1), 81(1998) 5 C.H.Liang, G.Y.Sha, S.C.Guo, Resorcinol-formaldehyde aerogels prepared by supercritical acetone drying, Journal of Non-crystalline Solids, 271(1-2), 167(2000) 6 D.C.Wu, R.W.Fu, S.T.Zhang, M.Dresselhaus, G.Dresselhaus. Preparation of low-density carbon aerogels by ambient pressure drying, Carbon, 42(10), 2033(2004) 7 W.X.Chen, J.Y.Lee, Z.L.Liu, Microwave-assisted synthesis of carbon supported Pt aanoparticles for fuel cell applications, Chem. Commun., 21, 2588(2002) 8 Z.L.Liu, J.Y.Lee, W.X.Chen, M.Han, L.M.Gan, Physical and electrochemical characterizations of microwave-assisted polyol preparation of carbon-supported PtRu nanoparticles, Langmuir, 20(1), 181(2004) 9 J.F.Zhu, Y.J.Zhu, Microwave-assisted one-step synthesis of polyacrylamide-metal (M=Ag, Pt, Cu) nanocomposites in Ethylene Glycol, J. Phys. Chem. B, 110(17), 8593(2006) 10 Y.L.Hsin, KC..Hwang, C.T.Yeh, Poly(vinylpyrrolidone)-modified graphite carbon nanofibers as promising supports for PtRu catalysts in direct methanol fuel cells, J. Am. Chem. Soc.,129(32), 9999(2007)
[1] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[2] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[3] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[4] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[5] 李延伟, 罗康, 姚金环. Ni(OH)2 负极材料的十二烷基硫酸钠辅助制备及其储锂性能[J]. 材料研究学报, 2023, 37(6): 453-462.
[6] 余谟鑫, 张书海, 朱博文, 张晨, 王晓婷, 鲍佳敏, 邬翔. N掺杂生物炭的制备及其对Co2+ 的吸附性能[J]. 材料研究学报, 2023, 37(4): 291-300.
[7] 朱明星, 戴中华. SrSc0.5Nb0.5O3 改性BNT基无铅陶瓷的储能特性研究[J]. 材料研究学报, 2023, 37(3): 228-234.
[8] 刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C3N4/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[9] 周毅, 涂强, 米忠华. 制备方法对磷酸盐微晶玻璃结构和性能的影响[J]. 材料研究学报, 2023, 37(10): 739-746.
[10] 谢锋, 郭建峰, 王海涛, 常娜. ZnO/CdS/Ag复合光催化剂的制备及其催化和抗菌性能[J]. 材料研究学报, 2023, 37(1): 10-20.
[11] 余超, 邢广超, 吴郑敏, 董博, 丁军, 邸敬慧, 祝洪喜, 邓承继. 亚微米Al2O3 对重结晶碳化硅的作用机制[J]. 材料研究学报, 2022, 36(9): 679-686.
[12] 方向明, 任帅, 容萍, 刘烁, 高世勇. 自供能Ag/SnSe纳米管红外探测器的制备和性能研究[J]. 材料研究学报, 2022, 36(8): 591-596.
[13] 李福禄, 韩春淼, 高嘉望, 蒋健, 许卉, 李冰. 氧化石墨烯的变温发光[J]. 材料研究学报, 2022, 36(8): 597-601.
[14] 朱晓东, 夏杨雯, 喻强, 杨代雄, 何莉莉, 冯威. Cu掺杂金红石型TiO2 的制备及其光催化性能[J]. 材料研究学报, 2022, 36(8): 635-640.
[15] 熊庭辉, 蔡文汉, 苗雨, 陈晨龙. ZnO纳米棒阵列和薄膜的同步外延生长及其光电化学性能[J]. 材料研究学报, 2022, 36(7): 481-488.