|
|
|
| Ni3Al金属间化合物多孔材料的制备及抗腐蚀性能 |
| 吴靓, 董虹星, 贺跃辉 |
| 中南大学粉末冶金国家重点实验室 长沙 410083 |
|
| Preparation and Corrosion Resistance in KOH Solution of Porous Ni3Al Intermetallics |
| WU Liang, Dong Hongxing, HE Yuehui |
| State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 |
引用本文:
吴靓 董虹星 贺跃辉. Ni3Al金属间化合物多孔材料的制备及抗腐蚀性能[J]. 材料研究学报, 2011, 25(2): 118-123.
.
Preparation and Corrosion Resistance in KOH Solution of Porous Ni3Al Intermetallics[J]. Chin J Mater Res, 2011, 25(2): 118-123.
| 1 S.M.Abdel basir, M A.Rabah. Hydrometallurgical recovery of metal values from brass melting slag, Hydrometallurgy, 53, 31–44(1999)2 A.Julbe, D.Farrusseng, C.Guizard, Porous ceramic membranes for catalytic reaction-overview and new idea , J. Membr. Sci., 181(1), 3(2001)3 LI Fayong, LI Yangchu, KONG Ying, Status and development of inorganic membranes and inorganic membrane reactors, Membrane Science and Technology, 22(6), 48(2002)(李发永, 李阳初, 孔瑛, 无机膜及无机膜反应器研究进展, 膜科学与技术, 22(6), 48(2002)) 4 P.A.Terry, M.Aerson, I.Tejedor, Catalytic dehydrogenation of cyclohexane using coated silica oxide ceramics membrane, Journal of Porous Materials, 6(4), 267(1999)5 LIAO Chuanghua, XU Nanping, SHI Jun, Researching progress and application of inorganic membrane in gas separation, China Ceramics, 39(2), 15(2003)(廖传华, 徐南平, 时钧, 气体分离无机膜的应用及研究进展, 中国陶瓷, 39(2), 15(2003)) 6 M.S.A.Heikkinen, N.H.Harley, Heikkinen, Naomi H.Harky, Experimental investigation of sintered porous metal filters, J. Aerosol Sci., 31(6), 721(2000)7 Noebe R D, Bowman R R, Nathal M V, Physical and mechanical property of B2 compound NiAl, Mater Rev, 38(4), 193–232(1993)8 Miracle D B, The physics and mechanical properties of NiAl, Acta Metal Mater, 41(3), 649–678(1993) 9 CHEN Guoxiang, WANG Doudou, ZHANG Jianmin, Selfdiffusion of Ni in the intermetallic compound Ni3Al, Physica B; Condensed Matter, 403(19/20), 3538–3542(2008)10 WANG Rongshan, HOU Huaiyu, NI Xiaodong, Molecular dynamics simulation of Ni3Al melting , Journal of University of Science and Technology Beijing: Mineral, Metallurgy, Material, 15(4), 425–429(2008)11 O.Ozdemir, S.Zeytin, C.Bindal, Tribological properties of NiAl produced by pressure-assisted combustion synthesis, Wear, 7–8(265), 979–985(2008) 12 M.M.Moshksar, M.Mirzaee, Formation of NiAl intermetallic by gradual and explosive exothermic reaction mechanism during ball milling, Intermetallics, 12(12), 1361–1366(2004)13 Y.L.Hao, R.Yang, Y.Song, Y.Y.Cui, D.Li, M.Niinomi, Formation of point defects in TiAl and NiAl, Intermetallics, 7–9(12), 951–956(2004) 14 P.M.Hazzledine, Y.Q.Sun, The interaction and concentration of vacancies in NiAl, Intermetallics, 7–9(12), 899–902(2004)15 X.Mao, S.Shimai, Porous ceramics with tri-modal pores prepared by foaming and starch consolidation, Ceramics International, 34(1), 107(2008)16 X.Zhu, D.Jiang, S.Tan, Preparation of silicon carbide reticulated porous ceramics , Materials Science and Engineering A, 323(1–2), 232(2002)17 G.J.C.Carpenter, Z.S.Wronski, M.W.Phaneuf, TEM study of nanopores and the embrittlement of CVD nickel foam, Materials Science and Technology, 20(11), 1421(2004)18 D.F.Susan, A.R.Marder, Ni-Al composite coatings: diffusion analysis and coating lifetime estimation, Acta Materialia, 49(7), 1153–1163(2001)19 St.Frank, S.V.Divinski, U.Sodervall, Chr.Herzig, Ni tracer diffusion in the B2-compoud NiAl: influence of temperature and composition, Acta Materialia, 49(8), 1399–1411(2001) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
