玻璃纤维增强气凝胶的动态力学性能及其破坏机理

材料研究学报

2009, Vol. 23

Issue (5): 524-528

研究论文

本期目录 | 过刊浏览

玻璃纤维增强气凝胶的动态力学性能及其破坏机理

杨杰; 李树奎

北京理工大学材料科学与工程学院北京 100081

Research on the dynamic mechanical property and failure mechanism of glass fiber reinforced aerogel

YANG Jie; LI Shukui

School of Materials Science and Engineering; Beijing Institute of Technology; Beijing 100081

引用本文:

杨杰李树奎. 玻璃纤维增强气凝胶的动态力学性能及其破坏机理[J]. 材料研究学报, 2009, 23(5): 524-528.
, . Research on the dynamic mechanical property and failure mechanism of glass fiber reinforced aerogel[J]. Chin J Mater Res, 2009, 23(5): 524-528.

全文: PDF(952 KB)

摘要:

使用Hopkinson 压杆对玻璃纤维增强气凝胶进行动态压缩实验, 用扫描电子显微镜研究气凝胶破坏机理. 结果表明, 气凝胶的动静态应力应变曲线均包括弹性区、屈服区和致密化区, 气凝胶在屈服区出现塑性屈服的特征. 气凝胶的应变率强化效应明显. 气凝胶对入射波的整形作用导致输入杆承载应力的幅值明显降低, 承载应力的时间延长. 在高应变率条件下, 气凝胶中的玻璃纤维几乎全部断裂, 与基体分离, 气孔急剧收缩. 气凝胶在动态压缩下的粉碎破坏是气凝胶轴向压应力和内部横向张应力升高所共同导致的.

关键词 ：无机非金属材料, 玻璃纤维增强气凝胶, 动态力学性能, 微观分析, 破坏机理

Abstract：

The dynamic mechanical property of glass fiber reinforced aerogel was investigated using a spilt Hopkinson pressure bar. Failure mechanism of aerogel was studied by scanning electron microscopy (SEM). The result showed that the quasi-static and dynamic stress-strain curves contained three regions: an elastic region, a yield region and a densification region. In the yield region, the compressive stress-strain curve showed plastic yield characteristics. The compressive behaviors of aerogel displayed a remarkable strain rate strengthening effect. Incident wave shaping using aerogel led to the decrease of stress on the incident bar and the increase of stress duration time on the incident bar. Under high strain rates, the glass fibers broke down and separated from matrix, and the pores shrank rapidly. Failure was due to the increase of axial compressive stress and lateral tensile stress under dynamic compression.

Key words： inorganic non-metallic materials glass fiber reinforced aerogel dynamic mechanical property micro-analysis failure mechanism

收稿日期: 2009-01-19

ZTFLH:

TB321

基金资助:

国防预研基金151241资助项目.

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	杨杰
	李树奎
44.8K

链接本文:

https://www.cjmr.org/CN/ 或 https://www.cjmr.org/CN/Y2009/V23/I5/524

1 G.W.Scherer, Characterization of aerogels, Advances in Colloid and Interface Science, 76-77, 321(1998)
2 Atul Katti, Nilesh Shimpi, Samit Roy, Chemical, physical, and mechanical characterization of isocyanate cross-
Linked amine-modified silica aerogels, Chemistry of Materials, 18, 285(2006)
3 LIU Jianfei, WANG Zhengdao, HU Shisheng, The SHPB experiment technology for low wave impedance porous materials,
Journal of Experimental Mechanics, 13, 219(1998)
(刘剑飞, 王正道, 胡时胜, 低阻抗多孔介质材料的SHPB实验技术, 实验力学, 13, 219(1998))
4 L.Blaz, E.Evangelista, Strain rate sensitivity of hot deformed Al and AlMgSi alloy, Materials Science and Engineering A, 207, 195(1996)
5 T.Mukai, H.Kanahashi, T.Miyoshi, Experimental study of energy absorption in a closed-celled aluminum foam under dynamic loading, Scripta Materialia, 40, 921(1999)
6 L.J.Gibson, M.F.Ashby, Cellular Solids: Structure and Properties, 2nd ed., (Cambridge, Cambridge University Press, 1997) p.153
7 H.Luo, H.Lu, N.Leventis, The compressive behavior of isocyanate-crosslinked silica aerogel at high strain rates, Mechanics of Time-Dependent Materials, 6, 83(2006)

[1]	宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125的CO₂ 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[2]	邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[3]	任富彦, 欧阳二明. g-C₃N₄ 改性Bi₂O₃ 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[4]	刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO₂ 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[5]	李延伟, 罗康, 姚金环. Ni(OH)₂ 负极材料的十二烷基硫酸钠辅助制备及其储锂性能[J]. 材料研究学报, 2023, 37(6): 453-462.
[6]	余谟鑫, 张书海, 朱博文, 张晨, 王晓婷, 鲍佳敏, 邬翔. N掺杂生物炭的制备及其对Co²⁺ 的吸附性能[J]. 材料研究学报, 2023, 37(4): 291-300.
[7]	朱明星, 戴中华. SrSc_0.5Nb_0.5O₃ 改性BNT基无铅陶瓷的储能特性研究[J]. 材料研究学报, 2023, 37(3): 228-234.
[8]	刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C₃N₄/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[9]	周毅, 涂强, 米忠华. 制备方法对磷酸盐微晶玻璃结构和性能的影响[J]. 材料研究学报, 2023, 37(10): 739-746.
[10]	谢锋, 郭建峰, 王海涛, 常娜. ZnO/CdS/Ag复合光催化剂的制备及其催化和抗菌性能[J]. 材料研究学报, 2023, 37(1): 10-20.
[11]	余超, 邢广超, 吴郑敏, 董博, 丁军, 邸敬慧, 祝洪喜, 邓承继. 亚微米Al₂O₃ 对重结晶碳化硅的作用机制[J]. 材料研究学报, 2022, 36(9): 679-686.
[12]	方向明, 任帅, 容萍, 刘烁, 高世勇. 自供能Ag/SnSe纳米管红外探测器的制备和性能研究[J]. 材料研究学报, 2022, 36(8): 591-596.
[13]	李福禄, 韩春淼, 高嘉望, 蒋健, 许卉, 李冰. 氧化石墨烯的变温发光[J]. 材料研究学报, 2022, 36(8): 597-601.
[14]	朱晓东, 夏杨雯, 喻强, 杨代雄, 何莉莉, 冯威. Cu掺杂金红石型TiO₂ 的制备及其光催化性能[J]. 材料研究学报, 2022, 36(8): 635-640.
[15]	熊庭辉, 蔡文汉, 苗雨, 陈晨龙. ZnO纳米棒阵列和薄膜的同步外延生长及其光电化学性能[J]. 材料研究学报, 2022, 36(7): 481-488.

Viewed

Full text

Abstract

Cited

Shared

Discussed