|
|
|
| 用行波电磁搅拌制备半固态AlSi7Mg合金浆料 |
| 赵振铎;毛卫民;钟荣茂 |
| 北京科技大学材料科学与工程学院材料加工系 |
|
| Preparation of semi-solid AlSi7Mg alloy slurry through traveling electromagnetic stirring |
| ; |
| 北京科技大学材料科学与工程学院材料加工系 |
引用本文:
赵振铎; 毛卫民; 钟荣茂 . 用行波电磁搅拌制备半固态AlSi7Mg合金浆料[J]. 材料研究学报, 2008, 22(4): 369-373.
,
,
.
Preparation of semi-solid AlSi7Mg alloy slurry through traveling electromagnetic stirring[J]. Chin J Mater Res, 2008, 22(4): 369-373.
1 D.B.Spencer,R.Mehrebian,M.C.Flemings,Rheological behavior of Sn-15Pb in the crystallization range,Metall Trans,3(7),1925(1972)
2 M.C.Flemings,R.G.Riek,K.P.Young,Rheocasting, Mater.Sci and Eng.,25,103(1976)
3 M.C.Flemings,Behavior of metal alloys in the semi-solid state,Metall Trans,22A(5),957-981(1991)
4 XIE Shuisheng,HUANG Shenghong,The technology and application of Semi-solid metal processing(Beijing,Met- allurgical industry press,1999) (谢水生，黄声宏，半固态金属加工技术及其应用(北京，冶金工业出版社，1999)p．130)
5 MAO Weimin,Semi-solid metal forming technology(Bei- jing,Machinery industry press,2004) (毛卫民，半固态金属成形技术(北京，机械工业出版社，2004) p．357)
6 S.P.Midson,The commercial status of semi-solid casting in the USA,in:Proc of the 4th Int Conf on Semi-solid Processing of Alloys and Composites,edited by D.H. Kirkwood and P.Kapranos(University of Sheffield,Eng- land,UK,Department of Engineering Materials,Univer- sity of Sheffield,1996)p.251
7 K.P.Young,C.P.Kyonka,J.A.Courtoris,Fine grained metal composition.US Patent,4415347,1983
8 V.I.Dobatkin,G.I.Eskin,Ingots of aluminum alloys with nondendritic structure produced by ultrasonic treatment for deformation in the semi-solid state,in:Proc of the 4th Int Conf on Semi-solid Processing of Alloys and Compos- ites,edited by D.H.Kirkwood and P.Kapranos(University of Sheffield,England,UK,Department of Engineering Ma- terials,University of Sheffield,1996)p.193
9 HU Hanqi,The Metal Solidification Theory,2nd edition, (Beijing,Machinery Industry Press,2000)p.109 (胡汉起，金属凝固原理，第2版，(北京，机械工业出版社，2000) p．109)
10 MAO Weimin,ZHAO Aimin,CUI Chenglin,ZHONG Xueyou,The formation mechanism of non-dendritic pri- maryα-Al phases in semi-solid AlSi7Mg alloy,Acta Met- all.Sinica,35(9),971(1999) (毛卫民，赵爱民，崔成林，钟雪友，电磁搅拌对半固态AlSi7Mg合金初生α-Al的影响规律，金属学报，35(9)，971(1999))
11 GAO Songfu,Mao Weimin,Bai Yuelong,Li Qiang,Fill- ing ability of semi-solid A356 alloy in rheo-casting and microstructure distribution,Special Casting & Nonferrous Alloys,10,598-599(2005) (高松福，毛卫民，白月龙，李强，半固态A356铝合金的流变压铸充填性与组织分布，特种铸造及有色合金，10，598—599(2005))
12 MAO Weimin,BAI Yuelong,TANG Guoxing,Prepara- tion for semi-solid aluminum alloy slurry under weak elec- tromagnetic stirring condition,J.Mater.Sci.Technol., 22(4),447(2006)
13 LIU Zheng,MAO weimin,ZHAO Zhenduo,Preparation of semi-solid slurry of aluminum alloys by a new technology, Chinese J.Mater.Research,20(2),125(2006) (刘政，毛卫民，赵振铎，用新工艺制备半固态铝合金浆料，材料研究学报，20(2)，125(2006))
14 TIAN Zhanfeng,ZHANG zhifeng,XU Jun,Shi Likai.The MSCP process semisolid slurry production.Proceed- ings of the 9th International Conference on Semi-Solid Processing of Alloys and Composites.Busan Korea,Sep- tember,11-13,362-365(2006)
15 E.Cardoso,H.V.Atkinson,H.Jones,Microstructural evo- lution of A356 during NRC processing.Proc of the 8th Int Conf on Semisolid Processing of Alloys and Compos- ites,edited by A.Alexandrou,D.Apelian and G.Georgiou (Limassol,Cyprus,University of Cyprus,2004)p.296
16 PAN Ye,ZHANG Chunyan,YUAN Haoyang,SUN Guox- long,Effect of metal flow at initial solidification on gran- ular primary crystal formation in semi-solid alloy,Acta Metall.Sinica,37(10),1035(2001) (潘冶，张春燕，袁浩扬，孙国雄，结晶初期熔体流动对半固态合金粒状初晶形成的作用，金属学报，37(10)，1035(2001))
17 MAO Weimin,ZHEN Zisheng,CHEN Hongtao,Mi- crostructure of semi-solid AZ91D alloy solidified during electromagnetic stirring,Chinese J.Mater.Research, 19(3),303(2005) (毛卫民，甄子胜，陈洪涛，电磁搅拌对半固态AZ91D镁合金组织的影响，材料研究学报，19(3)，303(2005))
18 J.A.Yurko,R.A.Martinez,M.C.Flemings,Development of the semi-solid rheocasting(SSR)process,in:Proc of the 7th Int Conf on Semi-solid Processing of Alloys and Com- posites,edited by Y.Tsutsui,M.Kiuchi and K.Ichikawa (Tsukuba Japan,National Institute of Advanced Indus- trial Science and Technology,Japan Society for Technol- ogy of Plasticity,2002)p.659X |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
