Please wait a minute...
材料研究学报  2008, Vol. 22 Issue (4): 374-378    
  论文 本期目录 | 过刊浏览 |
过共析钢在过冷奥氏体形变过程中的组织超细化
陈伟;李龙飞;杨王王月;孙祖庆
北京科技大学新金属材料国家重点实验室
;
北京科技大学新金属材料国家重点实验室
引用本文:

陈伟; 李龙飞; 杨王王月; 孙祖庆 . 过共析钢在过冷奥氏体形变过程中的组织超细化[J]. 材料研究学报, 2008, 22(4): 374-378.
, , , . [J]. Chin J Mater Res, 2008, 22(4): 374-378.

全文: PDF(1080 KB)  
摘要: 用Gleeble1500热模拟试验机进行单轴热压缩实验, 研究了过共析钢在过冷奥氏体形变过程中的组织演变规律. 结果表明: 过冷奥氏体变形可以抑制网状渗碳体的形成, 过冷奥氏体动态相变只得到珠光体组织, 在继续变形过程中珠光体发生动态球化, 得到超细化(α+θ)复相组织. 提高形变温度使过冷度降低, 阻碍过冷奥氏体动态相变的进行; 而降低应变速率使变形时间延长, 有利于过冷奥氏体动态相变和珠光体动态球化的进行, 但得到的超细化复相组织较为粗大.
关键词 金属材料过共析钢过冷奥氏体渗碳体    
Key words
收稿日期: 2007-07-16     
ZTFLH:  TG142.1  
1 D.R.Lesuer,C.K.Syn,A.Gokdberg,J.wadsworth, O.D.Sherby,The case for ultrahigh-carbon steels as structural materials,Journal of Materials,43,40(1993)
2 O.D.Sherby,Ultrahigh carbon steels,Damascus steels and ancient blacksmiths,ISIJ International,39,637(1999)
3 O.D.Sherby,B.Walser,C.M.Young,E.M.Cady,Super- plastic ultra-high carbon steels,Scripta Metallurgica,9, 569(1975)
4 B.Walser,O.D.Sherby,Mechanical behavior of superplas- tic ultrahigh carbon steels at elevated temperature,Met- allurgical Transactions A,10,1461(1979)
5 J.Wadsworth,J.H.Lin,O.D.Sherby,Superplasticity in a tool steel,Metals Technology,8,190(1981)
6 O.D.Sherby,T.Oyama,D.W.Kum,B.Walser, J.Wadsworth,Ultrahigh carbon steels,Journal of Metals,37,50(1985)
7 M.Carsi,A.F.Vicente,O.D.Sherby,F.Penalba, O.A.Ruano,Thermomechanical treatments of ultra- high carbon steels and optimal microstructures to improve toughness,Materials Science Forum,539-543, 4826(2007)
8 T.Oyama,O.D.Sherby,J.Wadsworth,B.Walser,Applica- tion of the divorced eutectoid transformation to the de- velopment of fine-gained,spheroidized structures in ul- trahigh carbon steels,Scripta Metallurgica,18,799(1984)
9 E.M.Taleff,B.L.Bramfitt,C.K.Syn,D.R.Lesuer, J.Wadsworth,O.D.Sherby,Processing,structure,and properties of a rolled,ultrahigh-carbon steel plate ex- hibiting a damask pattern,Materials Characterization, 46,11(2001)
10 T.Furuhara,T.Mizoguchi,T.Maki,Ultra-fine(α+β)du- plex structure formed by cold rolling and annealing of pearlite,ISIJ International,45,392(2005)
11 W.Fu,T.Furuhara,T.Maki,Effect of Mn and Si addition on microstructure and tensile properties of cold-rolled and annealed pearlite in eutectoid Fe-C alloys,ISIJ Interna- tional,44,171(2004)
12 S.Tagashira,K.Sakai,T.Furuhara,T.Maki,Deformation microstructure and tensile strength of cold roiled pearlitic steel sheets,ISIJ International,40,1149(2000)
13 HUANG Qingsong,LI Longfei,YANG Wangyue,SUN Zuqin,Transactions of Materials and Heat Treatment, Formation of proeutectoid ferrite during dynamic trans- formation of undercooled austenite in a eutectoid steel, 29(3),45(2008) (黄青松,李龙飞,杨王玥,孙祖庆,共析钢过冷奥氏体动态相变过程中先共析铁素体的生成,材料热处理学报,29(3),45(2008)
14 J.L.Robbins,O.C.Shepard,O.D.Sherby,Accelerated spheroidization of eutectoid steels by concurrent defor- mation,Journal of The Iron and Steel Institute,202, 804(1964)
15 S.Chattopadhyay,C.M.Sellars,Kinetics of pearlite spher- oidisation during static annealing and during hot defor- marion,Acta Metal,30,157(1982)
16 CHEN Guoan,YANG Wangyue,SUN Zuqin,Microstruc- ture evolution of medium carbon steel during deformation of undercooled austenite,Acta Metallurgica Sinica,43(1), 27(2007) (陈国安,杨王明,孙祖庆,中碳钢过冷奥氏体形变过程中的组织演变,金属学报,43(1),27(2007))
17 HUANG Qingsong,LI Longfei,YANG Wangyue,SUN Zuqin,The dynamic transformation of undercooling austenite and microstructure refinement in an eutectoid steel,Acta Metallurgica Sinica,43(7),724(2007) (黄青松,李龙飞,杨王玥,孙祖庆,共析钢过冷奥氏体动态相变和组织超细化,金属学报,43(7),724(2007))
18 HUANG Qingsong,YANG Wangyue,SUN Zuqin,Influ- ence of undercooling on dynamic transformation and mi- crostructure evolution in eutectoid steel,Chinese Journal of Materials Research,21(6),1(2007) (黄青松,杨王玥,孙祖庆,过冷对共析钢动态相变和组织演变的影响,材料研究学报,21(6),1(2007))
[1] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] 刘天福, 张滨, 张均锋, 徐强, 宋竹满, 张广平. 缺口应力集中系数对TC4 ELI合金低周疲劳性能的影响[J]. 材料研究学报, 2023, 37(7): 511-522.