Please wait a minute...
材料研究学报  2004, Vol. 18 Issue (1): 71-71    
  论文 本期目录 | 过刊浏览 |
质子辐照甲基硅橡胶的热释光和热释电研究
张丽新;徐洲;何世禹
1.上海交通大学高温材料与高温测试教育部重点实验室;2.哈尔滨工业150001
Thermoluminescence and thermally stimulated current of methyl silicone rubber induced by proton radiation
;;
1.上海交通大学高温材料与高温测试教育部重点实验室;2.哈尔滨工业150001
引用本文:

张丽新; 徐洲; 何世禹 . 质子辐照甲基硅橡胶的热释光和热释电研究[J]. 材料研究学报, 2004, 18(1): 71-71.

全文: PDF(1117 KB)  
摘要: 用空间辐照环境模拟设备对甲基硅橡胶进行了质子辐照试验。辐照能量为200keV,辐照剂量范围为1014-1016cm-2。利用热发光和热激电流分析方法,研究了硅橡胶质子辐照前后载流子陷阱能级ΔE及载流子类型的变化规律。研究结果表明:当辐照剂量小于1015cm-2时,ΔE下降,当辐照剂量超过1015cm-2后,ΔE上升。硅橡胶原始样品中主要载流子类型是电子型的。当质子辐照剂量超过5×1014cm-2后,主要载流子类型转变为空穴型。辐照剂量继续增加,载流子类型又有向电子型转变的趋势。
关键词 有机高分子材料橡胶质子辐照热释光    
Abstract:Protons radiation tests were carried out on methyl silicone rubber using space environment simulator system. The proton energy was chosen as 200keV, and the fluence in the range of 1014~1016cm-2. By means of thermoluminescence (TL) and thermally stimulated current (TSC) analyses, the evolution of the trap energy levelsΔE, the charge carrier type in the rubbers before and after proton radiation were characterized. TL and TSC analyses demonstrated that under the proton radiation, under the proton fluence less than 1015cm-2,ΔE decreased; under the fluence more than 1015cm-2, the situation was the opposite. After the proton radiation, the charge carriers in the silicone rubbers changed from the electron-type to the vacancy-type, and tended to the electron-type again after the fluence was further increased.
Key wordsorganic polymer materials    rubber    protom radiation    thermoluminescence
收稿日期: 2003-03-04     
ZTFLH:  TB324  
1 P.A.Gierow, J.P.Paxton, T.L.Cost, Journal of Spacecraft and Rockets, 32(2) , 317(1995)
2 A.I.Akishin, I.B.Teplov, Physics and Chemics in the Material Process, 3, 47(1992)
3 L.X.Zhang, S.Q.Yang, S.Y.He, Q.Wei, A Study on Damage of Methyl Silicone Rubber Induced by Proton Radiation, Sixth International Space Conference (Toroto-Canada, Science Press, May 1-3, 2002)
4 L.X.Zhang, S.Q.Yang, S.Y.He, Chinese Journal of Polymer Science, 21(5) , 563(2003)
5 L.X.Zhang, S.Q.Yang, S.Y.He, Journal of Spacecraft and Rockets, (in press)
6 ZHANG Lixin(张丽新), YANG Shiqin(杨士勤), HE Shiyu(何世禹), High Power Laser and Particle Beams(强激光与粒子束), 14(14) , 629(2002)
7 Yong Fan, Xuan Wang, Weguo Zhang, J. Phys. D: Appl.Phys., 32, 2809(1999)
8 H.Shimizu, T.Kitano, K.Natayama, Proc. Shanghai, 1996, ISE9: 552
9 Y.Fan, X.Wang, J.Mater.Sci.Technol., 14(2) , 357(1998)
10 XIA Zhongfu(夏钟福), Electret(驻极体) (Beijing, Science Press, 2001) p.225
11 QIAN Baogong(钱保功), XU Guanfan(许观藩), YU Fusheng(余赋生), Translation and Flab of High Polymer (高聚物的转变与松驰) (Beijing, Science and Technology Press, 1986) p.120
[1] 叶姣凤, 王飞, 左洋, 张钧翔, 罗晓晓, 冯利邦. 兼具高强度、高韧性和自修复性能的环氧树脂改性热可逆聚氨酯[J]. 材料研究学报, 2023, 37(4): 257-263.
[2] 李瀚楼, 焦晓光, 朱欢欢, 赵晓欢, 矫庆泽, 冯彩虹, 赵芸. 支链含氟聚酯的合成和性能[J]. 材料研究学报, 2023, 37(4): 315-320.
[3] 马逸舟, 赵秋莹, 杨路, 裘进浩. 热塑型聚酰亚胺/聚偏氟乙烯全有机复合薄膜的制备及其介电储能[J]. 材料研究学报, 2023, 37(2): 89-94.
[4] 殷洁, 胡云涛, 刘慧, 杨逸霏, 王艺峰. 基于电沉积技术构建聚苯胺/海藻酸膜及电化学性能研究[J]. 材料研究学报, 2022, 36(4): 314-320.
[5] 申延龙, 李北罡. 磁性氨基酸功能化海藻酸铝凝胶聚合物的制备及对偶氮染料的超强吸附[J]. 材料研究学报, 2022, 36(3): 220-230.
[6] 龙庆, 王传洋. 不同碳黑含量PMMA的热降解行为和动力学分析[J]. 材料研究学报, 2022, 36(11): 837-844.
[7] 蒋平, 吴丽华, 吕太勇, José Pérez-Rigueiro, 王安萍. 蜘蛛大壶状腺丝的反复拉伸力学行为和性能[J]. 材料研究学报, 2022, 36(10): 747-759.
[8] 鄢俊, 杨进, 王涛, 徐桂龙, 李朝晖. 有机硅油改性水性酚醛的制备及其性能[J]. 材料研究学报, 2021, 35(9): 651-656.
[9] 徐稳, 王知杰, 朱雯雯, 彭子童, 姚楚, 游峰, 江学良. 微穿孔板-聚合物层状结构材料的制备和吸声性能[J]. 材料研究学报, 2021, 35(7): 535-542.
[10] 张昊, 李帆, 常娜, 王海涛, 程博闻, 王攀磊. 羧酸型接枝淀粉吸附树脂的制备和对染料的去除性能[J]. 材料研究学报, 2021, 35(6): 419-432.
[11] 孙丽颖, 钱建华, 赵永芳. AgNWs-TPU/PVDF柔性薄膜电容传感器的制备和性能[J]. 材料研究学报, 2021, 35(6): 441-448.
[12] 唐开元, 黄洋, 黄湘舟, 葛颖, 李娉婷, 袁凡舒, 张威威, 孙东平. 碳化细菌纤维素的理化性质及其在甲醇电催化中的应用[J]. 材料研究学报, 2021, 35(4): 259-270.
[13] 苏晨文, 张婷玥, 郭丽伟, 李乐, 杨苹, 刘艳秋. 用于模拟细胞外基质的硫醇-烯水凝胶的制备[J]. 材料研究学报, 2021, 35(12): 903-910.
[14] 张向阳, 章奇羊, 汤涛, 郑涛, 柳浩, 刘国金, 朱海霖, 朱海峰. 基于MOFs的复合材料制备及其对亚甲基蓝染料的吸附性能[J]. 材料研究学报, 2021, 35(11): 866-872.
[15] 万里鹰, 肖洋, 张伦亮. 基于热可逆Diels-Alder动态共价键PU-DA体系的制备和性能[J]. 材料研究学报, 2021, 35(10): 752-760.