|
|
Mo/Nb/Ti/Zr微合金化对Fe-Cr-Al不锈钢第二相析出和显微硬度的影响 |
王镇华1, 温冬辉1, 吕阳1, 郝家苗1, 王清1(), 许余2 |
1 大连理工大学 三束材料改性教育部重点实验室 材料科学与工程学院 大连 116024; 2 中国核动力研究设计院 反应堆燃料及材料重点实验室 成都 610213 |
|
Effect of Mo/Nb/Ti/Zr Minor-alloying on the Second-phase Precipitation and Microhardness in Fe-Cl-Al Stainless Steels |
Zhenhua WANG1, Donghui WEN1, Yang LV1, Jiamiao HAO1, Qing WANG1(), Yu XU2 |
1 Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Ministry of Education) & School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China; 2 Science and Technology on Reactor Fuel and Materials Laboratory, Nuclear Power Institute of China, Chengdu 610213, China |
引用本文:
王镇华, 温冬辉, 吕阳, 郝家苗, 王清, 许余. Mo/Nb/Ti/Zr微合金化对Fe-Cr-Al不锈钢第二相析出和显微硬度的影响[J]. 材料研究学报, 2018, 32(8): 575-583.
Zhenhua WANG,
Donghui WEN,
Yang LV,
Jiamiao HAO,
Qing WANG,
Yu XU.
Effect of Mo/Nb/Ti/Zr Minor-alloying on the Second-phase Precipitation and Microhardness in Fe-Cl-Al Stainless Steels[J]. Chinese Journal of Materials Research, 2018, 32(8): 575-583.
[1] | Cockeram B V, Leonard K J, Byun T S, et al.Development of microstructure and irradiation hardening of Zircaloy during low dose neutron irradiation at nominally 377~440℃[J]. J. Nucl. Mater., 2014, 449: 69 | [2] | Azevedo C R F. Selection of fuel cladding material for nuclear fission reactors[J]. Eng. Fail. Anal., 2011, 18: 1943 | [3] | Rebak R B.Alloy selection for accident tolerant fuel cladding in commercial light water reactors[J]. Metall. Mater. Trans., 2015, 2E: 197 | [4] | Wu X, Kozlowski T, Hales J D.Neutronics and fuel performance evaluation of accident tolerant FeCrAl cladding under normal operation conditions[J]. Ann. Nucl. Energy, 2015, 85: 763 | [5] | George N M, Terrani K, Powers J, et al.Neutronic analysis of candidate accident-tolerant cladding concepts in pressurized water reactors[J]. Ann. Nucl. Energy, 2015, 75: 703 | [6] | Pint B A, Terrani K A, Brady M P, et al.High temperature oxidation of fuel cladding candidate materials in steam-hydrogen environments[J]. J. Nucl. Mater., 2013, 440: 420 | [7] | Cheng T, Keiser J R, Brady M P, et al.Oxidation of fuel cladding candidate materials in steam environments at high temperature and pressure[J]. J. Nucl. Mater., 2012, 427: 396 | [8] | Qu H P, Lang Y P, Yao C F, et al.The effect of heat treatment on recrystallized microstructure, precipitation and ductility of hot-rolled Fe-Cr-Al-REM ferritic stainless steel sheets[J]. Mater. Sci. Eng., 2013, 562A: 9 | [9] | Stott F H, Wood G C, Stringer J.The influence of alloying elements on the development and maintenance of protective scales[J]. Oxid. Met., 1995, 44: 113 | [10] | Yamamoto Y, Pint B A, Terrani K A, et al.Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors[J]. J. Nucl. Mater., 2015, 467: 703 | [11] | Field K G, Gussev M N, Yamamoto Y, et al.Deformation behavior of laser welds in high temperature oxidation resistant Fe-Cr-Al alloys for fuel cladding applications[J]. J. Nucl. Mater., 2014, 454: 352 | [12] | Capdevila C, Chao J, Jimenez J A, et al.Effect of nanoscale precipitation on strengthening of ferritic ODS Fe-Cr-Al alloy[J]. Mater. Sci. Technol., 2013, 29: 1179 | [13] | Zhang J Z, Wen D H, Jiang B B, et al.Effects of Ta and Zr minor-alloying on the high-temperature microstructural stability of Fe-Cr-Al-based ferritic stainless steels[J]. Chin. J. Mater. Res., 2017, 31: 336(张军政, 温冬辉, 姜贝贝等. 微量Ta和Zr对Fe-Cr-Al系不锈钢高温组织稳定性的影响[J]. 材料研究学报, 2017, 31: 336) | [14] | Bania P J.Beta titanium alloys and their role in the titanium industry[J]. JOM, 1994, 46(7): 16 | [15] | Barbangelo A.Influence of alloying elements and heat treatment on impact toughness of chromium steel surface deposits[J]. J. Mater. Sci., 1990, 25: 2975 | [16] | Hume-Rothery W.Atomic diameters, atomic volumes and solid solubility relations in alloys[J]. Acta Metall., 1966, 14: 17 | [17] | Zhu W H, Wang R S, Shu G G, et al.First-principles study of the structure, mechanical properties, and phase stability of crystalline zirconia under high pressure[J]. Struct. Chem., 2012, 23: 601 | [18] | Pang C, Jiang B B, Shi Y, et al.Cluster-plus-glue-atom model and universal composition formulas [cluster](glue atom)x, for BCC solid solution alloys[J]. J. Alloys Compd., 2015, 652: 63 | [19] | Wang Q, Ji C J, Wang Y M, et al.β-Ti alloys with low Young's moduli interpreted by cluster-plus-glue-atom model[J]. Metall. Mater. Trans., 2013, 44A: 1872 | [20] | Pang C, Wang Q, Zhang R Q, et al.β Zr-Nb-Ti-Mo-Sn alloys with low Young's modulus and low magnetic susceptibility optimized via a cluster-plus-glue-atom model[J]. Mater. Sci. Eng., 2015, 626A: 369 | [21] | Dong C, Wang Q, Qiang J B, et al.From clusters to phase diagrams: composition rules of quasicrystals and bulk metallic glasses[J]. J. Phys., 2007, 40: R273 | [22] | Ma Y, Wang Q, Li C L, et al.Chemical short-range orders and the induced structural transition in high-entropy alloys[J]. Scripta Mater., 2018, 144: 64 | [23] | Zhang J, Wang Q, Wang Y M, et al.Revelation of solid solubility limit Fe/Ni = 1/12 in corrosion resistant Cu-Ni alloys and relevant cluster model[J]. J. Mater. Res., 2010, 25: 328 | [24] | Wang Q, Ma Y, Jiang B B, et al.A cuboidal B2 nanoprecipitation-enhanced body-centered-cubic alloy Al0.7CoCrFe2Ni with prominent tensile properties[J]. Scripta Mater., 2016, 120: 85 | [25] | Takeuchi A, Inoue A.Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element[J]. Metall. Trans., 2005, 46: 2817 | [26] | Tang R Z, Tian R Z.Binary Alloy Phase Diagrams and Crystal Structure of Intermediate Phase [M]. Changsha: Central South University Press, 2009(唐仁政, 田荣璋. 二元合金相图及中间相晶体结构 [M]. 长沙: 中南大学出版社, 2009) | [27] | Voorhees P W.The theory of Ostwald ripening[J]. J. Stat. Phys., 1985, 38: 231 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|