Please wait a minute...
材料研究学报  2008, Vol. 22 Issue (1): 78-82    
  论文 本期目录 | 过刊浏览 |
Ni-Sn金属间化合物纳米粒子的制备和热稳定性
雷军鹏; 黄昊; 雷明凯; 董星龙
大连理工大学三束材料改性国家重点实验室 大连 116023 大连理工大学材料科学与工程学院 大连
引用本文:

雷军鹏; 黄昊; 雷明凯; 董星龙. Ni-Sn金属间化合物纳米粒子的制备和热稳定性[J]. 材料研究学报, 2008, 22(1): 78-82.

全文: PDF(604 KB)  
摘要: 采用直流电弧放电法制备Ni-Sn纳米粒子,研究了纳米粒子的结构、成份、形貌和热稳定性.结果表明,Sn比Ni蒸发得快是纳米粒子的成份与原料明显偏差的主要原因.由于非平衡反应和极短的反应时间,得到的是含有Ni_3Sn_4的多相混合物.与低熔点的Sn纳米粒子比较,Ni-Sn金属间化合物纳米粒子在725 K左右氧化缓慢,具有良好的热稳定性.
关键词 金属材料Ni-Sn纳米粒子直流电弧放电法    
Key words
收稿日期: 1900-01-01     
1 Z.D.Zhang,Mgnetic nanocapsules,J.Mater.Sci.Tech., 23,1(2007)
2 N.S.Stoloff,C.T.Liu,S.C.Deevi,Emerging applications of intermetallics,Intermetallics,8,1313(2000)
3 C.M.Ward-Close,R.Minor,P.J.Doorbar,Intermetallic- matrix composites-a review,Intermetallics,4,217(1996)
4 S.X.Mao,N.A.McMinn,N.Q.Wu,Processing and mechan- ical behaviour of TiAl/NiAl intermetallic composites pro- duced by cryogenic mechanical alloying,Mater.Sci.Eng. A,363,275(2003)
5 D.Chen,J.H.Chen,H.G.Yan,Z.H.Chen,Synthesis of bi- nary and ternary intermetallic powders via a novel reac- tion ball milling technique,Mater.Sci.Eng.A,444, 1(2007)
6 Ayumu Onda,Takayuki Komatsu,Tatsuaki Yashima, Preparation and catalytic properties of single-phase Ni- Sn intermetallic compound particles by CVD of Sn(CH_3)_4 onto Ni/Silica,J.Catal.,201,13(2001)
7 Y.Feng,M.C.Yang,X.K.Sun,W.D.Wei,The formation of Ti-Fe nanoparticles by gas condensation method, Nanostr.Mater.,9,113(1997)
8 S.Ma,D.Y.Geng,W.S.Zhang,W.Liu,X.L.Ma, Z.D.Zhang,Synthesis of a new type of GdAl_2 nanocapsule with a large cryogenic magnetocaloric effect and novel coral-like aggregates self-assembled by nanocapsules Nanotechnology,17,5406(2006)
9 Ayumu Onda,Takayuki Komatsu,Tatsuaki Yashima, Characterizations and catalytic properties of fine particles of Ni-Sn intermetallic compounds supported on SiO_2,J. Catal.,221,378(2003)
10 J.Hassoun,S.Panero,B.Scrosati,Electrodeposited Ni-Sn intermetallic electrodes for advanced lithium ion batteries, J.Power Sources,160,1336(2006)
11 DONG Xinglong,SUN Weimin,WANG Wei,LI Zhijie, A atomatic control equipment and its operating methods for producing metallic nanoparticles by DC arc discharge, China,200410021190.1,2004. (董星龙,孙维民,王维,李志杰,一种自动控制直流电弧金属纳米粉生产设备和使用方法,中国专利申请号:200410021190.1)
12 X.G.Li,A.Chiba,S.Takahashia,Preparation and mag- netic properties of ultrafine particles of Fe-Ni alloys,J. Magn.Magn.Mater.,170,339(1997)
13 JIANG Yu,LIU Ming,YANG Yanming,GUAN Deng- gao,CHEN Jiazhao,TU Mingjing,The hydrogen mecha- nism study in preparing nanonickel by plasma arc spraying method,Rare Metal Mater.Eng.,34,475(2005) (蒋渝,刘明,杨彦明,管登高,陈家钊,涂铭旌,等离子弧流溅射法制备纳米镍粉中的氢作用机制,稀有金属材料与工程,34,475(2005))
14 I.Langmuir,The vapor pressure of metallic tungsten, Phys.Rev.,2,329(1913)
15 H.S.Liu,J.Wang,Z.P.Jin,Thermodynamic optimization of the Ni-Sn binary system,CALPHAD,28,363(2004)
16 K.C.Won,M.L.Hyuck,Prediction of primary intermetallic compound formation during interfacial reaction between Sn-based solder and Ni substrate,Scripta Mater.,46, 777(2002)
17 Thompson,C.V.,On the role of diffusion in phase selec- tion during reactions at interfaces,J.Mater.Res.,7(2), 367(1992)
18 X.G.Li,A.Chiba,S.Takahashia,K.Ohsaki,Preparation, oxidation and magnetic properties of Fe--Cr ultrafine pow- ders by hydrogen plasma-metal reaction,J.Magn.Magn. Mater.,173,101(1999)
19 H.G.Jiang,M.Kyoung-sik,H.Dong,F.Hua,C.P.Wong, Size-dependent melting properties of tin nanoparticles, Chem.Phys.Lett.,429,492(2006)
[1] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] 刘天福, 张滨, 张均锋, 徐强, 宋竹满, 张广平. 缺口应力集中系数对TC4 ELI合金低周疲劳性能的影响[J]. 材料研究学报, 2023, 37(7): 511-522.