|
|
|
| 新型AgSnO2触头材料的制备和电弧侵蚀特性 |
| 徐爱斌;王亚平;丁秉钧 |
| 1.中国科学院金属研究所沈阳材料科学国家(联合)实验室 2. 西安交通大学 |
|
引用本文:
徐爱斌; 王亚平; 丁秉钧 . 新型AgSnO2触头材料的制备和电弧侵蚀特性[J]. 材料研究学报, 2003, 17(2): 156-161.
1 B.Gengenbach, U.Mayer, R.Michal, K.E.Seager, IEEE Trans.Comp., Hybrids, Manuf.Technol., Investigation on the switching behavior of AgSnO_2 material in commercial contactors, CHMT-8 (1) , 58(1985)
2 P.C.Wingert, C.H.Leung, IEEE Trans. Comp., Hybrids, Manuf.Technol., Comparison of the inherent erosion behaviors of silver-cadmium oxide and silver-tin oxide contact materials, CHMT-10 (1) , 56(1987)
3 K.H.Schroder, IEEE Trans.Comp., Hybrids, Manuf.Technol., Silver-metal oxide as contact materials,CHMT-10(1) , 127(1987)
4 P.C.Wingert, C.H.Leung, IEEE Trans.Comp., Hybrids, Manuf.Technol., The development of silver-based cadmium-free contact materials, 12(1) , 16(1989)
5 E.hetzmannseder, W.F.Rieder, IEEE Trans.Comp., Hybrids, Manuf.Technol., Part A, Make and Break Erosion of Ag/MeO contact materials, 19(3) , 397(1996)
6 F.Hauner, D.Jeanot, K.McNeilly J.Pinard, in Proc. 20th Int. Conf. Elect. Contact, Advanced AgSnO_2 contact materials for Current Contactors, edited by IEEE (Stockholm Sweden,-, 2000) p.19
7 L.Morin, N.B.Jemaa, D.Jaennot, IEEE Trans.Comp., Packag.Technol., Make arc erosinon and welding in the automotive area, 23(1) , 240(2000)
8 L.Morin, N.B.Jemaa, D.Jeannot, J.Pinard, L.Nedelec, IEEE Trans.Comp., Packag.Technol., Contacts materials performances under break arc in automotive applications, 23(2) , 367(2000)
9 S.King, C.Brecher, IEEE Trans.Comp., Hybrids, Manuf.Technol., Cracking mechisms in Ag-SnO_2 contact materials and their role in the erosion process, 12(1) , 32(1989)
10 A.Keil, W.A.Merl, Translated by ZHAO Huaren(赵华人), CHEN Changtu(陈昌图), Electrical Contact Materials (电接触和电接触材料) (Beijing, Mechanical Industry Press, 1993) p.253
11 Z.K.Chen, K.Sawa, IEEE Trans.Comp., Packag., Manuf.Technol., Part A, Effect of arc behavior on material transfer: A Review, 21(2) , 310(1998)
12 P.G.Slade, Electrical Contacts: Principles and Applications, 2, (New York, Marcel Dekker Inc., 1999) p.698
13 D.Jeannot, J.Pinard, P.Ramoni, M.Jost, IEEE Trans.Comp., Packag., Manuf.Technol., Part A, Physical and chemical properties of metal oxide additions to Ag-SnO_2 contact material and predictions of electrical performance, 17(1) , 17(1994)
14 H.A.Francisco, M.Myers, in Proc. 44th IEEE Holm Conf. Elect. Contacts, Optimization of silver tin oxide chemistry to enhance electrical performance in a.c. application, edited by IEEE (Nuremberg,-, 1998) p.193
15 WANG Baozhu(王宝珠), WANG Jingqin(王景琴), LU Yushen(吕玉申), WEN Ming(温鸣), Influence of Bi_2O_3 addition on the microstructure of AgSnO_2(添加物Bi_2O_3对AgSnO_2的显微组织的影响), Electrical Alloy(电工合金), 3, 7(2000) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
