材料研究学报  2012, Vol. 26 Issue (3): 321-326

研究论文 本期目录 | 过刊浏览 |

回流次数对In3Ag焊料微观组织和剪切性能的影响

马运柱, 李永君, 刘文胜, 黄国基

中南大学粉末冶金国家重点实验室 长沙 410083

Effects of Multiple Reflows on Microstructure and Shear Properties of In3Ag Solder

MA Yunzhu, LI Yongjun, LIU Wensheng, HUANG Guoji

State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083

马运柱 李永君 刘文胜 黄国基. 回流次数对In3Ag焊料微观组织和剪切性能的影响[J]. 材料研究学报, 2012, 26(3): 321-326.
. Effects of Multiple Reflows on Microstructure and Shear Properties of In3Ag Solder[J]. Chin J Mater Res, 2012, 26(3): 321-326.

摘要 参考文献 相关文章 Metrics 全文: PDF(939 KB)   摘要: 用扫描电镜和能量色散仪分别对In3Ag焊料焊点基体及其与铜基板界面IMC(Intermetallic compound)层的组织结构进行观察和分析, 用力学试验机测试焊点的剪切强度, 研究了电子封装中回流次数对In3Ag焊料微观组织和剪切性能的影响。结果表明：随着回流次数的增加, 基体中二次相AgIn2显著长大, 由颗粒状变为长条状, 界面IMC层(成分为(Ag, Cu)In2)的厚度线性增加, 其生长由界面反应速率和组元扩散速率混合控制, 焊点剪切强度呈下降趋势, 由1次回流的5.03 MPa降到5次回流的2.58 MPa; 回流1、2、3次后焊点剪切断裂方式均为焊料内部韧性断裂, 回流5次后断裂机制转变为韧脆混合断裂。 关键词 ： 金属材料,  In3Ag焊料,  回流次数,  微观组织,  剪切性能     Abstract：The IMC layer microstructure and the composition of In3Ag solder joint were observed and analyzed using SEM and EDS, and the shear strength of solder joint was measured using mechanical testing machine. The effects of reflow soldering cycles on microstructure and shear property of In3Ag solder were investigated. The results show that with increase of the reflow soldering cycles, the quadratic phase AgIn2 in solder matrix grows prominently, and the shape changes from grain to long strip. The thickness of (Ag, Cu)In2 layer increases linearly, which is controlled by interfacial reaction rate and component diffusion rate. The shear strength of solder joints decreases with reflow soldering cycles increasing, and those decrease from 5.03MPa after one cycle to 2.58MPa after five cycles. The fracture type is ductile fracture in solder matrix after 1, 2 and 3 cycles. After five reflow soldering cycles, the fracture type belongs to the mixed fracture of toughness and brittleness. Key words： metallic materials    In3Ag solder    multiple reflows    microstructure    shear property 收稿日期: 2011-12-12      ZTFLH:  TG113   基金资助: 国家配套项目JPPT--115--2--1057资助。 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 马运柱 44.8K 链接本文: https://www.cjmr.org/CN/      或      https://www.cjmr.org/CN/Y2012/V26/I3/321 1 LIU Ping, GU Xiaolong, YAO Pei, ZHAO Xinbing, LIU Xiaogang, Effect of multiple reflows on Sn3.8Ag0.7Cu–xNi/Ni solder joints, Electronic Components and Materials, 30(6), 53(2011) (刘 平, 顾小龙, 姚 琲, 赵新兵, 刘晓刚, 回流次数对Sn3.8Ag0.7Cu-xNi/Ni焊点的影响, 电子元件与材料,  30(6), \textbf{53}(2011)) 2 WU Fengshun, ZHANG Weigang, WU Yiping, AN Bing, Effects of reflow’s cycles on the properties of solder joints with Sn3.5Ag0.5Cu, J. Huazhong Univ. of Sci.& Tech. (Nature Science Edition), 34(10), 97(2006) (吴丰顺, 张伟刚, 吴懿平, 安兵, 回流次数对Sn3.5Ag0.5Cu焊点特性的影响, 华中科技大学学报(自然科学版), 34(10), 97(2006)) 3 W.H.Zhong, Y.C.Chan, M.O.Alam, B.Y.Wu, J.F.Guan, Effect of multiple reflow processes on the reliability of ball grid array (BGA)solder joints, Journal of Alloys and Compounds, 41, 123(2006) 4 J.M.Koo, S.B.Jung, Effect of substrate metallization on mechanical properties of Sn–3.5Ag BGA solder joints with multiple reflows, Microelectronic Engineering, 82, 569(2005) 5 Y.M.Liu, T.H.Chuang, Interfacial reactions between In10Ag solders and Ag substrates, Journal of Electronic Materials, 29(11), 1325(2000) 6 P.T.Vianco, J.A.Rejent, A.F.Fossum, Compression stressstrain and creep properties of the 52In-48Sn and 97In-3Ag low-temperature Pb-free solders, Lead-Free Electronic Solders, 18(1), 93(2007) 7 L.C.Tsao, Suppressing effect of 0.5wt.% nano-TiO2 addition into Sn-3.5Ag-0.5Cu solder alloy on the intermetallic growth with Cu substrate during isothermal aging, Journal of Alloys and Compounds, 509, 8441(2011) 8 WANG Chunqing, LI Mingyu, TIAN Yanhong, KONG Lingchao, Review of J IS Z 3198: Test method for lead-free solders, Electronics Process Technology, 25(2), 47(2004) (王春青, 李明雨, 田艳红, 孔令超, J IS Z 3198无铅钎料试验方法简介与评述, 电子工艺技术,  25(2), 47(2004)) 9 H.L.Reynolds, S.H.Kang, J.M.Morris, The ceep behavior of In-Ag eutectic solder joints, Journal of Electronic Materials, 28(1), 69(1999) 10 I.Dutta, P.Kumar, G.Subbarayan, Microstructural coarsening in Sn-Ag-based solders and its effects on mechanical properties, Journal of Matals, 61(6), 29(2009) 11 WANG Xiaojing, ZHU Qingsheng, WANG Zhongguang, SHANG Jianku, Modeling of Ag3Sn coarsening and its effect on creep in Sn-Ag-Cu solder, Acta Metallurgica Sinica, 45(8), 912(2009) (王小京, 祝清省, 王中光, 尚建库, Ag3Sn粗化模型及其对Sn-Ag-Cu焊料蠕变的影响, 金属学报,  45(8), 912(2009)) 12 LIU Wensheng, HUANG Guoji, MA Yunzhu, PENG Fen, CUI Peng, Influences of soldering process on structure and shear strength of InAg solder, Journal of Central South University(Science and Technology), 42(12), 3674(2011) (刘文胜, 黄国基, 马运柱, 彭 芬, 崔 鹏, 钎焊工艺对InAg低温焊料结构及剪切性能的影响, 中南大学学报(自然科学版),  42(12), 3674(2011)) 13 M.Schaefer, R.A.Fournalle, J.Liang, Theory for intermetallic phase growth between Cu and liqiud Sn-Pb solder based on grain boundary diffusion control, Journal of Electronic Materials, 27(11), 1167(1998) 14 WANG Lingling, SUN Fenglian,WANG Lifeng, LIU Yang, Effect of reflow soldering on IMC and shear strength of SnAgCu solder joint, Electronic Components and Materials, 28(9), 73(2009) (王玲玲, 孙凤莲, 王丽凤, 刘 洋, 回流焊对SnAgCu焊点IMC及剪切强度的影响, 电子元件与材料,  28(9), 73(2009)) 15 T.H.Chuang, C.C.Jain, S.S.Wang, Intermetallic compounds formed in In-3Ag solder BGA packages with ENIG and InAg surface finishes, Journal of Materials Engineering and Performance, 18(8), 1133(2009) 16 J.W.Yoon, S.W.Kim, S.B.Jung, Interfacial reaction and mechanical properties of eutectic Sn-0.7Cu/Ni BGA solder joints during isothermal long-term aging, Journal of Alloys and Compounds, 391, 82(2005) 17 ZHAO Jie, CHI Chengyu, CHENG Congqian, Effect of Bi addition on shear strength of Sn-3Ag-0.5Cu/Cu solder joints, Acta Metallurgica Sinica, 44(4), 473(2008) (赵杰, 迟成宇, 程从前, Bi对Sn-3Ag-0.5Cu/Cu无铅钎焊接头剪切强度的影响, 金属学报,  44(4), 473(2008)) [1] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648. [2] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125的CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654. [3] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667. [4] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684. [5] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696. [6] 欧阳康昕, 周达, 杨宇帆, 张磊. 含LPSO相Mg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705. [7] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580. [8] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613. [9] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632. [10] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570. [11] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640. [12] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542. [13] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560. [14] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510. [15] 刘天福, 张滨, 张均锋, 徐强, 宋竹满, 张广平. 缺口应力集中系数对TC4 ELI合金低周疲劳性能的影响[J]. 材料研究学报, 2023, 37(7): 511-522. Viewed Full text Abstract Cited   Shared      Discussed