|
|
|
| MB2--LY12扩散焊接头界面组织结构及其形成机制 |
| 张 建, 罗国强 , 李美娟, 王仪宇, 沈 强, 张联盟 |
| 武汉理工大学材料复合新技术国家重点实验室 武汉 430070 |
|
| Structure and Diffusion Mechanism of MB2/LY12 Joint by Diffusion Welding |
| ZHANG Jian, LUO Guoqiang, LI Meijuan, WANG Yiyu, SHEN Qiang, ZHANG Lianmeng |
| State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070 |
引用本文:
张 建 罗国强 李美娟 王仪宇 沈 强 张联盟. MB2--LY12扩散焊接头界面组织结构及其形成机制[J]. 材料研究学报, 2012, 26(2): 138-142.
.
Structure and Diffusion Mechanism of MB2/LY12 Joint by Diffusion Welding[J]. Chin J Mater Res, 2012, 26(2): 138-142.
| 1 Mordike B.L and Ebert T, Magnesium: pro– perties–applications–potential, Materials Science and Engineering A, 302(1), 37(2001)2 WANG Kuaishe, ZHANG Xiaolong, WANG Xunhong, XU Kewei, Comparison of fatigue properties between friction stir welds and TIG welds for Al alloy, Chinese Journal of Materials Research, 23(1), 73(2009)(王快社, 张小龙, 王训宏, 徐可为, 搅拌摩擦与氩弧焊铝合金接头疲劳性能的比较, 材料研究学报, 23(1), 73(2009))3 LIU Liming, TAN Jinhong, ZHAO Limin, LIU Xujing, The relationship between microstructure and properties of Mg/Al brazed joints using Zn filler metal, Materials Characterization, 59(4), 479(2008)4 G.Mahendran, V.Balasubramanian, T.Senthilvelan, Developing diffusion bonding windows for joining AZ31B magnesium—-AA2024 aluminium alloys, Materials and design, 30(4), 1240(2009)5 ZHOU Shiquan, XIONG Weihao, The interfacial microstructure and properties for Ti(C, N)/Ni in diffusion bonding process, Chinese Journal of Materials Research, 21(1), 87(2007)(周世权, 熊惟皓, Ti(C, N)/Ni扩散焊接界面的组织和性能, 材料研究学报, 21(1), 87(2007))6 LI Xianrong, LIANG Wei, ZHAO Xingguo, ZHANG Yan, FU Xiaopeng, LIU Fencheng, Bonding of Mg and Al with Mg–Al eutectic alloy and its application in aluminum coating on magnesium, Journal of Alloys and Compounds, 471(1–2), 408(2009)7 Dietrich D, Nickel D, KrauseM, Lampke T, Coleman M. P, Randle V, Formation of intermetallic phases in diffusion– welded joints of aluminium and magnesium alloys, Journal of Materials Science, 46(2), 357(2011)8 ZENG Hao, Diffusion welding of TC4 Titanium Alloy and LY12 Aluminum Alloy, Master’s Degree Thesis(2010)(曾 浩, TC4钛合金与LY12铝合金的扩散焊接研究, 硕士学位论文, 武汉理工大学(2010))9 LI Yajiang, LIU Peng, WANGJuan, MA Haijun, XRD and SEM analysis near the diffusion bonding interface of Mg/Al dissimilar materials, Vacuum, 82(1), 15(2007)10 Kwon Y. J. Shigematsu I, Saito N. Dissimilar friction stir welding between magnesium and aluminum alloys, Materials Letters, 62(23), 3827(2008)11 HE Peng, FENG Jicai, QIAN Yiyu, ZHANG Jiuhai, The new phase formation mechanism of intermetallic by diffusion welded joints, Transactions of The China Welding Institution, 22(1), 53(2001)(何 鹏, 冯吉才, 钱乙余, 张九海, 扩散焊接接头金属间化合物新相的形成机理, 焊接学报, 22(1), 53(2001))12 Mahendran G, Bahu S, Balasubramanian V. Analyzing the effect of diffusion bonding process parameters on bond characteristics of Mg–Al dissimilar joints, Journal of Materials Engineering and Performance, 19(5), 657(2010) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
