Please wait a minute...
材料研究学报  2012, Vol. 26 Issue (1): 1-7    
  研究论文 本期目录 | 过刊浏览 |
钢氧化磨损的轻微--严重磨损转变
王树奇1,2, 崔向红2
1.烟台大学环境与材料工程学院 烟台 264005
2.江苏大学材料科学与工程学院 镇江 212013
Mild–to–severe Wear Transition of Oxidative Wear of Steels
WANG Shuqi1,2,   CUI Xianghong2
1.School of Environment and Materials Engineering, Yantai University, Yantai 264005
2.School of Materials Science and Engineering, Jiangsu University, Zhenjiang 212013
引用本文:

王树奇 崔向红. 钢氧化磨损的轻微--严重磨损转变[J]. 材料研究学报, 2012, 26(1): 1-7.
, . Mild–to–severe Wear Transition of Oxidative Wear of Steels[J]. Chin J Mater Res, 2012, 26(1): 1-7.

全文: PDF(1269 KB)  
摘要: 研究了多种钢在400℃高温磨损行为, 发现钢具有共同的磨损规律。在低载时钢的磨损率和磨损增长率均较低, 随着载荷增加, 在某一载荷磨损率快速提高。钢高温磨损的本质是一个包含磨面氧化、基体热软化和塑变的物理化学过程。对钢的高温磨损提出了氧化磨损中轻微--严重磨损转变模型及其特征。
关键词 金属材料氧化磨损高温磨损氧化物    
Abstract:The wear behavior and mechanism of various steels at 400℃ were investigated. The results show that the wear behavior has common regularity. The wear rate and the increase rate of wear are slow in the condition of low load; as the load increased the wear rate rapidly increases at a certain load. The essence of elevated--temperature wear is a physical and chemical process including oxidation of worn surface, softening and plastic deformation. A real model about mild--to--severe wear transition in elevated--temperature oxidative wear of steels was proposed and its characteristics are given.
Key wordsmetallic materials    steel    oxidative wear    elevated--temperature wear    tribo--oxide
收稿日期: 2011-11-22     
ZTFLH: 

TH117

 
基金资助:

国家自然科学基金51071078资助项目。

 1 I.A.Inman, Microscopy of glazed layers formed during high temperature sliding wear at 750℃, Wear,  254, 461(2003)

 2 I.Radu, D.Y.Li, Investigation of the role of oxide scale on satellite 21 modified with yttrium in resisting wear at elevated temperatures, Wear,  259, 453(2005)

 3 G.A.Fontalvo, C.Mitterer, The effect of oxide--forming alloying elements on the high temperature wear of a hot work steel, Wear,  258, 1491(2005)

 4 LIU Lili, MAI Yongjin, JIE Xiaohua, YU Neng, ZHENG Xiangxin, The sliding wear behavior of nano--crystalline surface layer on 45# steel at elevated temperature, Tribology,  30(3), 285(2010)

(刘莉莉, 麦永津, 揭晓华, 于能, 郑向新, 45#钢表面纳米晶层的高温磨损特性, 摩擦学学报,  30(3), 285(2010))

 5 CUI Jing, CHEN Yue, LIU Jingchao, DU Sanming, QIU Ming, ZHANG Yongzhen, Study on tribological properties of steel--copper couples in high temperature and oxygen atmosphere,  Lubrication Engineering,  34(2), 35(2009)

(崔晶, 陈跃, 刘敬超, 杜三明, 邱明, 张永振, 高温氧气条件下CrNiMo钢的摩擦磨损特性研究, 润滑与密封,  34(2), 35(2009))

 6 DU Sanming, ZHANG Yongzhen, LIU Weimin, QIU Ming, Tribological behavior of CrNiMo steel at very high speed and elevated temperature in oxygen atmosphere, Tribology,  28(4), 361(2008)

(杜三明, 张永振, 刘维民, 邱明, 氧气气氛中CrNiMo钢的高温高速干滑动摩擦磨损性能, 摩擦学学报,  28(4), 361(2008))

 7 YANG Zhuojuan, HAN Zhiwu, REN Luquan, Friction and wear behavior of bionic non--smooth surfaces at high temperature, Tribology,  25(4), 374(2005)

(杨卓娟, 韩志武, 任露泉, 激光处理凹坑形仿生非光滑表面试件的高温摩擦磨损特性研究, 摩擦学学报,  25(4), 374(2005))

 8 CHENG Xianhua, WANG Conghe, XIE Chaoying, High temperature mechanical and tribological behaviors of hot work die steel CH95, Tribology,  23(4), 326(2003)

(程先华, 王从鹤, 谢超英, 新型热作模具钢CH95的高温力学和抗磨性能研究, 摩擦学学报,  23(4), 326(2003))

 9 M.Pellizzari, A.Molinari, G.Straffelini, Tribological behaviour of hot rolling rolls, Wear,  259, 1281(2005)

 10 O.Barrau, C.Boher, Analysis of the friction and wear behaviour of hot work tool steel for forging, Wear,  255, 1444(2003)

 11 T.F.J.Quinn, D.M.Rowson, J.L.Sullivan, Application of the oxidational theory of mild wear to the sliding wear of low alloy steel,  Wear,  65, 1(1980)

 12 F.H.Stott, High--temperature sliding wear of metals, Tribol. Int., 35, 489(2002)

 13 N.F.Garza--Montes--de--Oca, W.M.Rainforth,Wear mechanisms experienced by a work roll grade high speed under different environmental condition, Wear,  267, 441(2009)

 14 M.X.Wei, K.M.Chen, S.Q.Wang, X.H.Cui,Analysis for wear behaviors of oxidative wear, Tribol. Lett.,  42, 1(2011)

 15 H.So, D.S.Yu, C.Y.Chuang, Formation and wear mechanism of tribo--oxides and the regime of oxidational wear of steel, Wear,  253, 1004(2002)

 16 H.So, The mechanism of oxidational wear, Wear, 184, 161(1995)

 17 Y.T.Zhao, S.Q.Wang, Z.R.Yang, M.X.Wei, A new delamination pattern in elevated temperature oxidative, J. Mater. Sci.,  44, 227(2010)

 18 S.Q.Wang, M.X.Wei, F.Wang, X.H.Cui, K.M.Chen, Effect of morphology of oxide scale on oxidative wear of hot working die steels, Mater. Sci. Eng., 505A, 20(2009)
[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[3] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[4] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[5] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[6] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[7] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[8] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[9] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[10] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[11] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[12] 杨栋天, 熊良银, 廖洪彬, 刘实. 基于热力学模拟计算的CLF-1钢改良设计[J]. 材料研究学报, 2023, 37(8): 590-602.
[13] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[14] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[15] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.