|
|
|
| 液态浸渗挤压Al2O3sf/2A12铝基复合材料表面损伤的预测 |
| 刘健; 齐乐华; 周计明; 苏力争 |
| 西北工业大学机电学院 西安 710072 |
|
| Prediction of surface damage for Al2O3sf/2A12 composites by liquid infiltration-extrusion process |
| LIU Jian; QI Lehua; ZHOU Jiming; SU Lizheng |
| School of Mechatronics; Northwestern Polytechnical University; Xi'an 710072 |
引用本文:
刘健 齐乐华 周计明 苏力争. 液态浸渗挤压Al2O3sf/2A12铝基复合材料表面损伤的预测[J]. 材料研究学报, 2009, 23(6): 616-621.
,
,
,
.
Prediction of surface damage for Al2O3sf/2A12 composites by liquid infiltration-extrusion process[J]. Chin J Mater Res, 2009, 23(6): 616-621.
| 1 QI Lehua, LI Hejun, CUI Peiling, SHI Zhongke, Forming of tubes and bars of alumina/LY12 composites by liquid extrusion process, Transactions of Nonferrous Metals Society of China (English Edition), 13(4), 803(2003)
2 QI Lehua, CUI Peiling, SHI Zhongke, LI Hejun, FEM analysis on the temperature field during composite tube liquid-solid extrusion forming process, Acta Metallurgica Sinica, 38(5), 549(2002)
(齐乐华, 崔培玲, 史忠科, 李贺军, 液--固挤压复合材料管材成形过程中温度场的有限元分析, 金属学报, 38(05),549(2002))
3 R.Hambli, D.B.Levet, Damage and fracture simulation during the extrusion processes, Computer Methods in Applied Mechanics and Engineering, 186(1), 109(2000)
4 K.Saanouni, J.F.Mariage, A.Cherouat, P.Lestriez, Numerical prediction of discontinuous central bursting in axisymmetric forward extrusion by continuum damage mechanics, Computers and Structures, 82(27),2309(2004)
5 D.H.Chen, S.K.Syu, C.H.Wu, S.K.Lin, Investigation into cold extrusion of aluminum billets using three-dimensional finite element method, Journal of Materials Processing Technology, 192-193, 188(2007)
6 Z.Peng, T.Sheppard, Study of surface cracking during extrusion of aluminium alloy AA 2014, Materials Science and Technology, 20(9), 1179(2004)
7 D.C.Chen, C.P.Chen, Investigation into equal channel angular extrusion process of billet with internal defects, Journal of Materials Processing Technology, 204(1-3), 419(2008)
8 CHENG Yu, Damage of particulate reinforced metal matrix composites due to plastic forming and coupled analysis of deformation and heat-transfer, PhD Dissertation, Xian Jiaotong University(1998)
(程羽, 颗粒增强金属基复合材料塑性成形的损伤与变形--传热耦合分析, 博士学位论文, 西安交通大学, (1998))
9 DU Zhiming, CHENG Yuansheng, LUO Shoujing, Al2O3sf ·SiCp/Al mechanical behaviour of compression and transmutation mechanism at high temperature and in semi–solid state, Chinese Journal of Materials Research, 19(2), 218(2005)
(杜之明, 程远胜, 罗守靖, Al2O3sf SiCp/Al复合材料的压缩变形力学行为及机制, 材料研究学报, 19(2), 218(2005))
10 ZHOU Jiming, QI Lehua, CHEN Guoding, ZHANG Yuebing, Research on the constitutive equation of Al2O3sf/LY12 composite under hot compression deformation, Journal of Plasticity Engineering, 12(05), 58(2005)
(周计明, 齐乐华, 陈国定, 张跃冰, Al2O3sf/LY12复合材料热压缩变形流变本构方程研究, 塑性工程学报, 12(05), 58(2005))
11 X.J.Duan, X.Velay, T.Sheppard, Application of finite element method in the hot extrusion of aluminium alloys, Materials Science and Engineering A, 369, 66(2004)
12 QI Lehua, SHI Zhongke, CUI Peiling, TIAN Feng, LI Hejun, FEM analysis on the temperature field during composite tube liquid-solid extrusion forming process, Chinese Journal of Mechanical Engineering, 38(2), 53(2002)
(齐乐华, 史忠科, 崔培玲, 田丰, 李贺军, 液态挤压非稳态温度场的有限元模拟, 机械工程学报, 38(2), 53(2002))
13 YUAN Shijian, LI Feng, HE Zhubin, Effects of guiding angle on plastic metal flow and defects in extrusion of aluminum alloy, Journal of Materials Science and Technology, 24(2), 256(2008)
(苑世剑, 李峰, 何祝斌, 导流角对铝合金挤压变形中金属流动与缺陷的影响, 材料科学与工艺, 24(2), 256(2008))
14 WANG Zhenjun, QI Lehua, ZHOU Jiming, YANG Fang, 3D FEM analysis on the temperature field during liquidsolid extrusion process of Al2O3sf/LY12 composites, Acta Metallurgica Sinica, 48(08), 857(2007)
(王振军, 齐乐华, 周计明, 杨 方, Al2O3sf/LY12复合材料液固挤压成形中温度场演变的三维有限元分析, 金属学报, 48(08), 857(2007))
15 I.Flitta, T.Sheppard, Effect of pressure and temperature variations on FEM prediction of deformation during extrusion, Materials Science and Technology, 21(3), 339(2005) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
