|
|
|
| 超细晶奥氏体在两相区大变形后的瞬态组织 |
| 姚圣杰;杜林秀†;刘相华;王国栋 |
| 东北大学轧制技术及连轧自动化国家重点实验室 沈阳 110004 |
|
| Transient microstructure after large deformation at two-phase region of ultra-fine grained austenite |
| YAO shengjie; DU Linxiu†; LIU Xianghua; WANG Guodong |
| State Key Laboratory of Rolling and Automation; Northeastern University; Shenyang 110004 |
引用本文:
姚圣杰 杜林秀 刘相华 王国栋. 超细晶奥氏体在两相区大变形后的瞬态组织[J]. 材料研究学报, 2008, 22(6): 572-576.
,
,
,
.
Transient microstructure after large deformation at two-phase region of ultra-fine grained austenite[J]. Chin J Mater Res, 2008, 22(6): 572-576.
| 1 M.Niikura, M.Fujioka, Y.Adachi, A.Matsukura, T.Yokota, Y.Shirota, Y.Hagiwara, New concepts for ultra refinement of grain size in Super Metal Project, Journal of Materials Processing Technology, 117(3), 341(2001)
2 XUE Xiaohuai, SHAN Yiyin, ZHENG Lei, LOU Songnian, Microstructural characteristic of low carbon microalloyed steels produced by thermo-mechanical controlled process, Materials Science and Engineering A, 438-440, 285(2006)
3 Y.Saito, H.Utsunomiya, N.Tsuji, T.Sakai, Novel ultrahigh straining process for bulk materials-development of the accumulative roll-bonding (ARB) process, Acta mater., 47(2), 579(1999)
4 N.Tsuji, R.Ueji, Y.Minamino, Y.Saito, A new and simple process to obtain nano-structured bulk low-carbon steel with superior mechanical property, Scripta Materialia, 46(4), 305(2002)
5 R.Z.Valiev, N.A.Krasilnikov, N.K.Tsenev, Plastic deformation of alloys with submicron-grained structure, Materials Science and Engineering A, 137, 35(1991)
6 J.S.C.Jang, C.C.Koch, The hall-petch relationship in nanocrystalline iron produced by ball milling, Scripta Metallurgica et Materialia, 24(8), 1599(1990)
7 N.R.Tao, M.L.Sui, J.Lu, K.Lu, Surface nanocrystallization of iron induced by ultrasonic shot peening, Nanostructured Materials, 11(4), 433(1999)
8 P.Heilmann, W.A.T.Clark, D.A.Rigney, Orientation determination of subsurface cells generated by sliding, Acta Metallurgica, 31(8), 1293(1983)
9 P.J.Hurley, P.D.Hodgson, B.C.Muddle, Analysis and characterisation of ultra-fine ferrite produced during a new steel strip rolling process, Scripta Materialia, 40(4), 433(1999)
10 DU Linxiu, XIONG Mingxian, YAO Shengjie, LIU Xianghua, WANG Guodong, Submicron-crystallization of low carbon steels through transformation, Acta Metallurgica Sinica, 43(1), 59(2007)
(杜林秀, 熊明鲜, 姚圣杰, 刘相华, 王国栋, 利用相变进行低碳钢的亚微米化, 金属学报, 43(1), 59(2007))
11 QI Junjie, YANG Wangyue, SUN Zuqiang, Ultra-fien ferrite formation during deformation of undercooled austenite in a low carbon steel, Acta Metallurgica Sinica, 38(9), 897(2002)
(齐俊杰, 杨王玥,孙祖庆等, 低碳钢过冷奥氏体形变过程超细铁素体的形成, 金属学报, 38(9), 897(2002))
12 YANG Wangyue, HU Anmin, SUN Zuqing, Effect of austenite grain size on strain enhanced transformation in a low carbon steel, Acta Metallurgica Sinica, 36(10), 1055(2000)
(杨王玥, 胡安民, 孙祖庆, 低碳钢奥氏体晶粒控制对形变诱导相变的影响, 金属学报, 36(10), 1055(2000))
13 H.C.Choi, T.K.Ha, H.C.Shin, Y.W.Chang, The formation kinetics of deformation twin and deformation induced ε– martensite in an austenitic Fe-C-Mn steel, Scripta Materialia, 40(10), 1171(1999)
14 S.H.Hong, Y.S.Han, The effects of deformation twins and strain-induced ε–martensite on mechanical properties of an Fe-32Mn-12Cr-0.4C cryogenic alloy, Scripta Metallurgica et Materialia, 32(9), 1489(1995)
15 MI Zhenli, TANG Di, YAN Ling, GUO Jin, Study of high strength and high plasticity TWIP steel, Iron and Steel, 40(1), 58(2005)
(米振莉, 唐荻, 严玲, 郭锦, 高强度高塑性TWIP钢的开发研究, 钢铁, 40(1), 58(2005)) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
