Please wait a minute...
材料研究学报  2008, Vol. 22 Issue (2): 220-224    
  论文 本期目录 | 过刊浏览 |
X20CrMoV12.1钢的组织结构和缺口疲劳强度
吴细毛; 谢光宗; 张广平
东北电力科学研究院有限公司
引用本文:

吴细毛; 谢光宗; 张广平 . X20CrMoV12.1钢的组织结构和缺口疲劳强度[J]. 材料研究学报, 2008, 22(2): 220-224.

全文: PDF(1199 KB)  
摘要: 用扫描电镜和透射电镜观察X20CrMoV12.1 耐热钢在545℃长期运行后的微观组织结构变化, 研究了不同运行时间后材料的缺口疲劳强度和硬度. 结果表明: 经过高温长期运行后, X20CrMoV12.1钢的组织明显退化, 其显微组织由原来的马氏体板条结构和弥散分布的 细小碳化物逐步转变为亚晶粒和分布在晶界上的粗化球形碳化物组织; 随着在高温下运行时间的增加, 耐热钢的显微硬度和疲劳强度逐渐降低. 其原因是基体中固溶体主要合金元素Cr, Mo, V发生贫化, 固溶强化效果降低, 沿晶界分布的粗化球形碳化物弱化了材料晶界强度, 从而导致X20CrMoV12.1耐热钢高温服役寿命下降.
关键词 金属材料耐热钢微观组织缺口疲劳强度    
Key words
收稿日期: 2007-04-27     
1 L.M.Wyatt,Materials technology in power generation in the U.K.,Mater.Sci.Eng.,7,237(1971)
2 N.S.Cheruvu,Influences of impurity content,tensile strength,and grain size on in-service temper embrittle- ment of CrMoV steels,Metall.Trans.A,20A,87(1989)
3 K.R.Williams,B.Wilshire,Microstructural instability of 0.5Cr-0.5Mo-0.25V creep-resistant steel during service at elevated temperatures,Mater.Sci.Eng.,47,151(1981)
4 J.W.Schinkel,P.L.F.Radermakers,B.R.Drenth, C.P.Scheepens,Heat treatment,aging effects,and microsture of 12 PCT Cr steels,J.Heat Treat.,3, 237(1984)
5 G.Eggeler,N.Nilsvang,B.Ilschner,Microstructural changes in a 12% chromium steel during creep,Steel Res., 58,97(1987)
6 G.Eggeler,The effect of long-term creep on particle coars- ening in tempered martensite ferritic steels,Acta Metall., 37,3225 (1989)
7 A.Joarder,D.S.Sarma,N.S.Cheruvu,Effect of long-term service exposure on microstructure and mechanical prop- erties of a CrMoV steam turbine rotor steel,Metall.Trans. A,22A,1811(1991)
8 Y.Qin,G.G(?)tz,W.Blum,Subgrain structure during an- nealing and creep of the cast martensitic Cr-steel G- X12CrMoWVNbN 10-1-1,Mater.Sci.Eng.A,341, 211(2003)
9 G.G(?)tz,W.Blum,Influence of thermal history on pre- cipitation of hardening phases in tempered martensite 10%Cr-steel X12CrMoWVNbN 10-1-1,Mater.Sci.Eng. A,348,201(2003)
10 Z.F.Hu,Z.G.Yang,An investigation of the embrittlement in X20CrMoV12.1 power plant steel after long-term ser- vice exposure at elevated temperature,Mater.Sci.Eng. A,383,224(2004)
11 X.M.Wu,G.P.Zhang,J.Q.Zhang,W.G.Chen,Effects of microstructures on strength and fatigue properties of long-term-serviced F12 steels,Proceedings of Asian Pa- cific Conference on Fracture and Strength 2006,Sanya, China (2006),p45
12 G.P.Zhang,Z.G.Wang,G.Y.Li,Fatigue crack growth of Ni3Al(CrB) single crystals at ambient and elevated tem- peratures,Acta Mater.,45,1705(1997)
13 HU Zhengfei,YANG Zhenguo,The morphological and compositional changes of the carbides in F12 heat- resistant alloy steel for long-term service at elevated tem- perature,Acta Metallurgica Sinica,39(2),131(2003) (胡正非,杨振国,长期高温时效F12耐热合金钢中碳化物形态和组分变化,金属学报,39(2),131(2003))
[1] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] 刘天福, 张滨, 张均锋, 徐强, 宋竹满, 张广平. 缺口应力集中系数对TC4 ELI合金低周疲劳性能的影响[J]. 材料研究学报, 2023, 37(7): 511-522.