|
|
|
| 形变热处理对T91钢组织和性能的影响 |
| 宁保群; 刘永长; 徐荣雷; 杨留栓 |
| 天津大学材料科学与工程学院 |
|
引用本文:
宁保群; 刘永长; 徐荣雷; 杨留栓 . 形变热处理对T91钢组织和性能的影响[J]. 材料研究学报, 2008, 22(2): 191-196.
1 M.Yoshizawa,M.Igarashi,Long-term creep deformation characteristics of advanced ferritic steels for USC power plants,Inter.J.Pressure Vessels & Piping,84(1-2), 37(2007)
2 J.M.Beér,High efficiency electric power generation:The environmental role,Progress in Energy and Combustion Science,33(2),107(2007)
3 G.Gupta,Z.Jiao,A.N.Ham,Mierostructural evolution of proton irradiated T91,J.Nuclear Mater.,351(1-3), 162(2006)
4 S.Obtsuka,S.Ukai,M.Fujiwara,Nano-mesoscopic struc- tural control in 9Cr-ODS ferritic/martensitic steels,J. Nuclear Mater.,351(1-3),241(2006)
5 Y.Yi,B.Lee,S.Kim,Corrosion and corrosion fatigue be- haviors of 9Cr steel in a supercritical water condition, Mater.Sci.Eng.A,429(1),161(2006)
6 M.Taneike,F.Abe,Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions, Nature,424(17),294(2003)
7 R.L.Klueh,N.Hashimoto,P.J.Maziasz,Development of new nano-particle-strengthed martensitic steels,Scipta Mater.,53(3),275(2005)
8 Y.Chen,K.Sridharan,T.Allen,Corrosion behavior of ferritic-martensitic steel T91 in supercritical water,Cor- rosion Science,48(9),2843(2006)
9 J.O(?)oro,Weld metal microstructure analysis of 9-12% Cr steels,Inter. J.Pressure Vessels & Piping,83(7), 540(2006)
10 P.Ampornrat,G.S.Was,Oxidation of ferritic-marteusitic alloys T91,HCM12A and HT-9 in supercritical water,J. Nuclear Mater.,371(1-3),1(2007)
11 Y.Yi,B.Lee,S.Kim,J.Jang,Corrosion and corrosion fa- tigue behaviors of 9Cr steel in a supercritical water con- dition,Mater.Sci.Eng.,A,429(1-2),161(2006)
12 Y.Chen,K.Sridharan,S.Ukai,T.R.Allen,Oxidation of9Cr oxide dispersion strengthened steel exposed in supercriti- cal water,J.Nuclear Mater.,371(1-3),118(2007)
13 S.Ohtsuka,S.Ukai,H.Sakasegawa,M.Fujiwara,T.Kaito, T.Narita,Nano-mesoscopic structural characterization of 9Cr-ODS marteusitic steel for improving creep strength, J.Nuclear Mater.,387(1),160(2007)
14 H.Sakaeegawa,S.Ohtsuka,S.Ukai,H.Tanigawa, M.Fujiwara,H.Ogiwara,A.Kohyama,Particle size effects in mechanically alloyed 9Cr ODS steel powder,J. Nuclear Mater.,387(1),185(2007)
15 A.A.Barani,F.Li,P.Romano,D.Ponge,D.Raabe,Design of high-strength steels by microaUoying and thermome- chanical treatment,Mater.Sci.Eng.,483(1-2),138(2007)
16 H.K.D.H.Bhadeshia,S.R.Honeycombe,Thermomechani- cal Treatment of Steels,Steels (Third edition),209(2006)
17 S.N.Prasad and D.S.Sarma,Influence of thermomechani- cal treatment on microstructure and mechanical properties of Nb bearing weather resistant steel,Mater.Sci.Eng. A,40a(1-2),53(2005)
18 ZHU Fuxian,LIU Chuan,WANG Ping,Research on law of deformation of 9Cr-1Mo-V-Nb steel under high- temperature,Steel Pipe,28(2),8(1999) (朱伏先，刘川，王平，9Cr-1Mo-V-Nb钢高温变形规律的研究，钢管，28(2)，8(1999))
19 M.Mackenzie,A.J.Craven,C.L.Collins,Nanoanalysis of very fine VN precipitates in steel.Scipta Mater.,54(1), 1(2006)
20 F.Abe,M.Taneike,K.Sawada,Alloy design of creep resis- tant 9Cr steel using a dispersion of nano-sized carboni- trides,International Journal of Pressure Vessels and Pip- ing,8(1-2),3(2007)
21 XU Zuyao,Martensitic Phase Transformation & Marten- site (Beijing,Scientific Press,1999) p.430 (徐祖耀，马氏体相变与马氏体(北京，科学出版社，1999) p．430)
22 R.L.Klueh,N.Hashimoto,P.J.Maziasz,New nano- particle-strengthened ferritic/martensitic steels by con- ventional thermo-mechanical treatment,J.Nuclear Mater.,367(1),48(2007) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
