Please wait a minute...
材料研究学报  2008, Vol. 22 Issue (1): 46-52    
  论文 本期目录 | 过刊浏览 |
抽拉速率对SRR99单晶高温合金组织和性能的影响
赵乃仁; 金涛; 孙晓峰; 管恒荣; 杨洪才; 胡壮麒;
东北大学 沈阳 110004 中国科学院金属研究所 沈阳
引用本文:

赵乃仁; 金涛; 孙晓峰; 管恒荣; 杨洪才; 胡壮麒. 抽拉速率对SRR99单晶高温合金组织和性能的影响[J]. 材料研究学报, 2008, 22(1): 46-52.

全文: PDF(1381 KB)  
摘要: 用螺旋选晶法制备镍基单晶高温合金SRR99,研究了抽拉速率对其组织和性能的影响.随着抽拉速率的增大,SRR99单晶合金的铸态组织由粗枝状晶向细枝状晶演变,枝晶干与枝晶间的γ′相尺寸减小,且枝晶间γ′相的形状逐渐趋向于规则立方体形状,而γ-γ′共晶的含量增加.热处理后,在高抽拉速度下生成的共晶组织更容易固溶,形成更加均匀的组织.随着抽拉速率的增大,SRR99单晶合金的持久寿命延长.
关键词 金属材料单晶高温合金SRR99抽拉速率组织    
Key words
收稿日期: 1900-01-01     
1 HU Zhuangqi,LIU Lirong,JIN Tao,SUN Xiaofeng,De- velopment of the Ni-base single crystal superalloy,Aero engine,31(3),1(2005) (胡壮麒,刘丽荣,金涛,孙晓峰,镍基单晶高温合金的发展,航空发动机,31(3),1(2005))
2 CHEN Rongzhang,Development status of single crystal superalloys,Mater.Eng.,8,3(1995) (陈荣章,单晶高温合金发展现状,材料工程,8,3(1995))
3 J.J.Yu,X.F.Sun,T.Jin,H.R.Guan,Z.Q.Hu,Mechanical behaviour of a single crystal superalloy DD32-a compari- son with the alloy SRR99,Material Science Forum,475- 479,681(2005)
4 Y.Liu,J.J.Yu,Y.Xu,X.F.Sun,H.R.Guan,Z.Q.Hu,Tem- perature dependence of high-cycle fatigue behavior of a Ni-base single crystal superalloy,Mater.Sci.Forum,546- 549,1219(2007)
5 B.Marty,P.Moretto,P.Gergaud,J.L.Lebrun,K.Ostolaza, V.Ji,X-ray study on single crystal superalloy SRR99:Mis- matchγ/γ′,mosaicity and internal stress,Acta Mater., 45(2),791(1997)
6 M.G.Ardakani,M.Mclean,B.A.Shollock,Twin formation during creep in single crystals of nickel-based superalloys, Acta Mater.,47(9),2593(1999)
7 R.Volkl,U.Glatzel,M.Feller-Kniepmeier,Measurement of the lattice misfit in the single crystal nickel based superal- loys CMSX-4,SRR99 and SC16 by convergent beam elec- tron diffraction,Acta Mater.,46(12),4395(1998)
8 D.W.Maclachlan,L.W.Wright,S.S.K.Gunturi, D.M.Knowles,Modelling the anisotropic and biaxial creep behaviour of Ni-base single crystal superalloys CMSX-4 and SRR99 at 1223 K,in:Superalloys 2000, edited by T.M.Pollock,R.D.Kissinger,R.R.Bowman, K.A.Green,M.McLean,S.Olson,J.J.Schirra(TMS, Warrendale,PA,2000)p.357
9 J.W.Rutter,B.Chalmers,A prismatic substructure formed during solidification metals,B.Can.J.Phys.,31, 15(1953)
10 W.A.Tiller,K.A.Jackson,J.W.Rutter,B.Chalmers,The redistributiort of solute atoms during the solidification of metals,Acta Metall.,1,428(1953)
11 HU Hanqi,Principle of Metal Solidification,(Beijing,Me- chanical Industry Press,1992)p.25 (胡汉起,金属凝固原理(北京,机械工业出版社,1992)p.25
12 J.D.Hunt,Solidification and Casting of Metals,(London, TMS,1979)
13 LI Jinshan,ZHANG Wanming,KOU Hongchao,LI Shuangming,ZHANG Fengshou,HU Rui,LIU Lin,FU Hengzhi,Effect of structure refining on heat-treated struc- tures and mechanical properties in single crystal super- alloy,The Chinese Journal of Nonferrous Metals,12(2), 290(2002) (李金山,张万明,寇宏超,李双明,张丰收,胡锐,刘林,傅恒志,原始组织对高温合金热处理组织和力学性能的影响,中国有色金属学报,12(2),290(2002)
14 F.Diologent,P.Caron,On the creep behavior at 1033 K of new generation single-crystal superalloys,Mater.Sci. Eng.A,385(1-2),245(2004)
15 Takao Murakumo,Toshiharu Kobayashi,Yutaka Koizumi, Hiroshi Harada,Creep behaviour of Ni-base single-crystal superalloys with variousγ′volume fraction,Acta Mater., 52(12),3737(2004)
16 D.D.Pearson,F.D.Lemkey,B.H.Kear,Stress cqarsening ofγ′and its influence on creep properties of a single crystal superalloy,In Superalloy 1980,edited by J.K.Tien,et. al.,(TMS,Warrendale,PA,2000)p.513
[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[3] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[4] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[5] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[6] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[7] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[8] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[9] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[10] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[11] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[12] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[13] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[14] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[15] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510.