|
|
|
| TiC增强复合材料在不同条件下的磨损行为 |
| 柳长磊;李曙;刘阳;刘越 |
| 中国科学院金属研究所 沈阳110016 |
|
引用本文:
柳长磊;李曙;刘阳;刘越. TiC增强复合材料在不同条件下的磨损行为[J]. 材料研究学报, 2007, 21(6): 664-668.
1 P.Ettmayer,W.Lengauer,The story of cermets,Powder Metallurgy International,21(2),37(1989)
2 ZHANG Xinghong,HE Xiaodong,Research on TiC-Ni cermets by SHS and PSEVDO heat isostatic pressing, Powder Metallurgy Technology,17,24(1999) (张幸红，赫晓东，自蔓延加压法合成TiC-Ni基金属陶瓷，粉末冶金技术，17，24(1999))
3 ZHOU Yu,SONG Guiming,Fracture behavior of TiC_p/W composites,The Chinese Journal of Nonferrous Metals, 9(1),158(1999) (周玉，宋桂明，TiC_p/W复合材料的断裂行为，中国有色金属学报，9(1)，158(1999))
4 GUAN Dehui,YU Baohai,BI Jing,Development and ap- plication of the cermcts composite cutting tools for plas- tic granulation,Powder Metallurgy Technology,16(1), 36(1998) (关德慧，于宝海，毕敬，金属陶瓷复合塑料切粒刀的研制及应用，粉末冶金技术，16(1)，36(1998))
5 J.Kübarsepp,H.Klaasen,J.Pirso,Behaviour of TiC-base cermets in different wear conditions,Wear,249,229(2001)
6 I.Hussainova,Effect of microstructure on the erosive wear of titanium carbide-base cermets,Wear,255,121(2003)
7 WANG Quanzhao,LIU Yue,CHEN Zhiliang,BI Jing,Microstructure and mechanical properties of TiC/NiCrMoAlTi cermets,Chinese Journal of Materials Research,19(4),354(2005) (王全兆，刘越，陈志亮，毕敬，TiC/NiCrMoAlTi金属陶瓷的微观结构与力学性能，材料研究学报，19(4)，354(2005))
8 ZHANG Wei,JIANG Yong,New generation cermets: manufacture,properties and applications,Rare Metals and Cemented Carbide,129,55(1997) (张伟，蒋勇，新一代金属陶瓷的制造、性能及应用，稀有金属与硬质合金，129，55(1997))
9 LIU Yue,YU Baohai,GUAN Duhui,WANG Zhenbo,BI Jing,Microstructure and properties of TiC/NiCr cermets produced by partial liquid-phase sintering,Journal of Ma- terials Science Letters,20,619(2001)
10 LIANG Yanan,Development of single pendulum scratch- ing and its application in the studies of impact abrasion of some composites,A dissertation submitted for degree of doctor of philosophy,Institute of Metal Research,Chinese Academy of Sciences(1995) (梁亚南，单摆冲击划痕法及其在几种复合材料冲击磨料磨损研究中的应用，博士学位论文，中国科学院金属研究所(1995))
11 HU ANG Linguo,LI Shu,LI Shizhuo,The plastic/brittle transition of electroless plating N-P coating under dy- namic loading condition,Journal of Materials Protection, 36(6),22(2003) (黄林国，李曙，李诗卓，Ni-P化学镀层在动态加载条件下的塑脆转变，材料保护，36(6)，22(2003))
12 B.Lamy,C.Gauthier,An analysis of adhesive Properties of brittle coating,J.Mater.Sci.Letter,10,358(1991)
13 B.Lamy,J.Berlie,Brittleness and analysis of ceramic and polymeric materials by means of scratching experiments, J.Mater.Sci.Letter,3,1069(1984)
14 T.G.Mathia,B.Lamy,Characterization of nearly brittle materials,Wear,108,385(1986) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
