Please wait a minute...
材料研究学报  2007, Vol. 21 Issue (6): 654-658    
  论文 本期目录 | 过刊浏览 |
纳米Al_2O_3改性聚甲醛的摩擦磨损性能
孙斓珲;杨振国;李小慧
复旦大学材料科学系 上海200433(孙斓珲;杨振国);上海材料研究所 上海200437(李小慧)
引用本文:

孙斓珲;杨振国;李小慧. 纳米Al_2O_3改性聚甲醛的摩擦磨损性能[J]. 材料研究学报, 2007, 21(6): 654-658.

全文: PDF(880 KB)  
摘要: 制备纳米粒子Al_2O_3填充改性的聚甲醛(POM)纳米复合材料,在干摩擦和油润滑条件下研究了纳米粒子的加入对POM纳米复合材料摩擦磨损性能的影响.结果表明:尽管POM/Al_2O_3纳米复合材料的干摩擦性能有所下降,但是油润滑性能得到了大幅度的提高,且当纳米Al_2O_3的含量为9%时,油润滑性能达到最佳.润滑油的存在提高了纳米粒子的活动性,并且纳米粒子的表面活性可以填平磨痕并增强转移膜与对偶面的粘结强度.
关键词 复合材料聚甲醛纳米复合材料干摩擦     
Key words
收稿日期: 1900-01-01     
1 YANG Shengrong,JIAN Lingqi,WANG Honggang, Progress in the study of POM self-lubricating materi- als in tribology,Materials for Mechanical Engineering, 28(10),1(2004) (杨生荣,简令奇,王宏刚,聚甲醛润滑材料在摩擦学领域的研究进展,机械工程材料,28(10),1(2004))
2 L.Zsidai,P.De Baets,P.Samyn,G.Kalacska,A.P.Van Pe- teghem,F.Van Parys,The tribological behaviour of en- gineering plastics during sliding friction investigated with small-scale specimens, Wear,253(5-6),673(2002)
3 H.Benabdallah,Friction and wear of blended poly- oxymethylene sliding against coated steel plates,Wear, 254(12),1239(2003)
4 F.Shimin,G.Guosheng,Application of nanoparticles,Ma- terials Review,15,29(2001)
5 H.Hahn,R.Tannebaum,Synthesis,functional properties and applications of nanostructures,Journal of Materials Science,36,550(2002)
6 C.J.Schwartz,S.Bahadur,Studies on the tribological be- havior and transfer film counterface bond strength for polyphenylene sulfide filled with nanoscale alumina par- ticles,Wear,237(2),261(2000)
7 Q.H.Wang,J.F Xu,An investigation of the friction and wear properties of nanometer Si_3N_4 filled PEEK,Wear, 196(1-2),82(1996)
8 ZHANG Renji,FENG Xiancan,Tribological research ad- vance of PEEK and its composites,Chinese Journal of Material Research,16(1),1(2002) (张人佶,冯显灿,聚醚醚酮及其复合材料的摩擦学研究进展,材料研究学报,16(1),1(2002))
9 D.L.Burris,W.G.Sawyer,Improved wear resistance in alumina-PTFE nanocomposites with irregular shaped nanoparticles,Wear,260(7-8),915(2006)
10 Q.H.Wang,Q.J.Xue,W.C.Shen,The friction and wear properties of SiO_2 filled polyether-therketone,Tribology International,30(3),193(1997)
11 P.Bhimaraj,D.L.Burris,J.Action,W.G.Sawyer, C.G.Toney,Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly(ethylene) terephthalate composites,Wear,258(9),1437(2005)
12 H.Cai,F.Y.Yan,Q.J.Xue,W.M.Liu,Investigation of tri- bological properties of Al_2O_3-polyimide nanocomposites, Polymer Testing,22(8),875(2003)
13 WANG Qihua,XUE Qunji,SHEN Weichang,YANG Shengrong,SEM investigations of worn surfaces and trans- fer filims of PEEK filled with nanometer ZrO_2,Chinese Journal of Material Research,13(1),107(1999) (王齐华,薛群基,沈维长,杨生荣,纳米ZrO_2填充PEEK的摩擦表面和转移膜,材料研究学报,13(1),107(1999))
14 L.G.Yu,S.R.Yang,An investigation of the friction and wear behaviors of micrometer copper particle and nanome- ter copper particle filled polyoxymethylene composites, Journal of Applied Polymer Science,77(11),2402(2000)
15 Q.H.Wang,Q.J.Xue,Friction and wear properties of PEEK filled with nano-SiC and micro-SiC,Function Ma- terials,29(5),558(1998)
16 H.T.Wang,W.M.Liu,Study on the friction and wear properties of polyoxymethylene filled Cu powder and Cu(nanometer),Polymeric Materials Science and Engi- neering,13(1),79(1997)
17 B.Z.Wang,L.Chen,Experiment study of three-layer com- posite materials of bearings,Journal of Wuhan University of Technology,17(2),71(1995)/
[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 刘瑞峰, 仙运昌, 赵瑞, 周印梅, 王文先. 钛合金/不锈钢复合板的放电等离子烧结技术制备及其性能[J]. 材料研究学报, 2023, 37(8): 581-589.
[3] 季雨辰, 刘树和, 张天宇, 查成. MXene在锂硫电池中应用的研究进展[J]. 材料研究学报, 2023, 37(7): 481-494.
[4] 王伟, 解泽磊, 屈怡珅, 常文娟, 彭怡晴, 金杰, 王快社. Graphene/SiO2 纳米复合材料作为水基润滑添加剂的摩擦学性能[J]. 材料研究学报, 2023, 37(7): 543-553.
[5] 张藤心, 王函, 郝亚斌, 张建岗, 孙新阳, 曾尤. 基于界面氢键结构的石墨烯/聚合物复合材料的阻尼性能[J]. 材料研究学报, 2023, 37(6): 401-407.
[6] 邵萌萌, 陈招科, 熊翔, 曾毅, 王铎, 王徐辉. C/C-ZrC-SiC复合材料的Si2+ 离子辐照行为[J]. 材料研究学报, 2023, 37(6): 472-480.
[7] 张锦中, 刘晓云, 杨健茂, 周剑锋, 查刘生. 温度响应性双面纳米纤维的制备和性能[J]. 材料研究学报, 2023, 37(4): 248-256.
[8] 王刚, 杜雷雷, 缪自强, 钱凯成, 杜向博文, 邓泽婷, 李仁宏. 聚多巴胺改性碳纤维增强尼龙6复合材料的界面性能[J]. 材料研究学报, 2023, 37(3): 203-210.
[9] 林师峰, 徐东安, 庄艳歆, 张海峰, 朱正旺. TiZr基非晶/TC21双层复合材料的制备和力学性能[J]. 材料研究学报, 2023, 37(3): 193-202.
[10] 苗琪, 左孝青, 周芸, 王应武, 郭路, 王坦, 黄蓓. 304不锈钢纤维/ZL104铝合金复合泡沫的孔结构、力学、吸声性能及其机理[J]. 材料研究学报, 2023, 37(3): 175-183.
[11] 张开银, 王秋玲, 向军. FeCo/SnO2 复合纳米纤维的制备及其吸波性能[J]. 材料研究学报, 2023, 37(2): 102-110.
[12] 周聪, 昝宇宁, 王东, 王全兆, 肖伯律, 马宗义. (Al11La3+Al2O3)/Al复合材料的高温性能及其强化机制[J]. 材料研究学报, 2023, 37(2): 81-88.
[13] 罗昱, 陈秋云, 薛丽红, 张五星, 严有为. 钠离子电池双层碳包覆Na3V2(PO4)3 正极材料的超声辅助溶液燃烧合成及其电化学性能[J]. 材料研究学报, 2023, 37(2): 129-135.
[14] 刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C3N4/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[15] 谢东航, 潘冉, 朱士泽, 王东, 刘振宇, 昝宇宁, 肖伯律, 马宗义. 增强颗粒尺寸对B4C/Al-Zn-Mg-Cu复合材料微观组织及力学性能的影响[J]. 材料研究学报, 2023, 37(10): 731-738.