Please wait a minute...
材料研究学报  2005, Vol. 19 Issue (6): 615-618    
  论文 本期目录 | 过刊浏览 |
强流脉冲离子束辐照对M2高速钢的表面改性
李玉海; 肖福仁; 王玉辉; 张罡; 姚俊; 刘延文
沈阳理工大学; 沈阳110168
引用本文:

李玉海; 肖福仁; 王玉辉; 张罡; 姚俊; 刘延文 . 强流脉冲离子束辐照对M2高速钢的表面改性[J]. 材料研究学报, 2005, 19(6): 615-618.

全文: PDF(1370 KB)  
摘要: 研究了强流脉冲离子束辐照对M2高速钢(W6Mo5Cr4V2) 表面的微观组织和硬度的影响.结果表明, HIPIB辐照处理使高速钢样品表面强烈加热又快速冷却, 产生表面淬火作用, 导致碳化物溶解, 马氏体溶碳量增大且晶粒细化或晶格畸变度增大, 晶间出现残余奥氏体. 辐照还使表面产生宏观残余压应力, 形成一些弥散分布的火山口状熔坑. 随着脉冲次数的增加, 在材料表面产生微区光化现象, 材料表面化学成分和相组成的差异、杂质分布以及位错密度不均匀性导致的非均匀、非稳定熔化等是产生熔坑的主要原因. 辐照使材料表层及以下近200 μm范围内的硬度提高, 并出现硬度双峰现象, 离子束辐照产生的应力波及其在材料中的传播所导致的位错密度增大是硬度提高的原因.
关键词 金属材料强流脉冲离子束高速钢相组成    
Key words
收稿日期: 1900-01-01     
1 S.Ando,Optical properties of fluorinated polyimides and their applications to optical components and waveguide circuits,J.Photopolym.Sci.Tech.,11,219(2004)
2 H.Ma,A.K.Y.Jen,L.R.Dalton,Polymer-based optical waveguides:Materials,processing,and devices,Adv. Mater.,14,1339(2002)
3 H.Gao,D.Wang,S.W.Guan,W.Jiang,Z.H.Jiang, W.N.Gao,D.M.Zhang,Fluorinated hyperbranched poly- imide for optical waveguides,Macromol.Rapid Comm., 28,252(2007)
4 X.J.Zhao,J.G.Liu,H.X.Yang,L.Fan,S.Y.Yang,Novel polyfluorinated polyimides derived fromα,α-bis(4- amino-3,5-difluorophenyl) phenylmethane and aro- matic dianhydrides:Synthesis and characterization,Eur. Polym.J.,44,808(2008)
5 X.J.Zhao,J.G.Liu,J.M.Rui,L.Fan,S.Y.Yang,Syn- thesis and characterization of organosoluble polyfluori- nated polyimides derived from 3,3',5,5'-tetrafluoro-4,4'- diamino-diphenylmethane and various aromatic dianhy- drides,J.Appl.Polym.Sci.,103,1442(2007)
6 J.K.Park,D.H.Lee,B.J.Song,J.B.Oh,H.K.Kim,Synthe- sis and characterization of novel perfluorinated polyimides with 3D-controlled structures for photonic applications,J. Polym.Sci.A:Polym.Chem.,44,1326(2006)
7 J.Y.Do,S.K.Park,J.J.Ju,S.Park,M.H.Lee,Electro-optic materials:hyperbranched chromophores attached linear polyimide and dendritic polyesters,Polym.Adv.Tech., 16,221(2005)
8 T.Takasaki,Y.Kuwana,T.Takahashi,S.Hayashida,Syn- thesis and optical properties of polyimides,J.Polym.Sci. Part A:Polym.Chem.,38,4832(2000)
9 T.Trigaud,C.Aubry,D.Chiron,J.P.Moliton, B.Colombeau,6FDA-ODA waveguldes etched by ion shrinkage,Syn.Metal,115,33(2000)
10 K.Han,H.J.Lee,T.H.Rhee,Low-lees passive polymer waveguides by using chlorofluorinated polylmides,J.Appl. Polym.Sci.,74,107(1999)
11 T.Matsumoto,The origin of coloration in sromstic poly- imides:an approach from quantum chemistry,J.Pho- topolym.Sci.Tech.,12,231(1999)
12 S.Ando,T.Matsuura,S.Sasski,Perfluorinated polyimide synthesis,Macromolecules,25,5858(1992)
13 K.Han,W.H.Jang,T.H.Rhee,Synthesis of fluorinated polyimides and their application to passive optical waveguides,J.Appl.Polym.Sci.,77,2172(2000)
14 M.Hasngawa,K.Horie,Photophysics,photochemistry,and optical properties of polyimides,Prog.Polym.Sci.,26, 259(2001)
15 J.G.Liu,Y.Nskamura,T.Ogura,Y.Shibssaki,S.Ando, M.Ueda,Optically transparent sulfur-containing polyimide-TiO_2 nanocomposite films with high refractive index and negative pattern formation from poly(amic acid)-TiO_2 nanocomposite film,Chem.Mater.,20, 273(2008)
16 Y.Watanabe,Y.Sakai,Y.Shibasaki,A.Ando,M.Ueda, Synthesis of wholly alicyclic polyimides from N-silylated alicyclic diamines and alicyclic dianhydrides,Macromole- cules,35,22T7(2002)
17 K.Xie,S.Y.Zhang,J.G.Liu,M.H.He,S.Y.Yang, Synthesis and characterization of soluble fluorine- containing polyimides based on 1,4-bis(4-amino-2- trifluoromethylphenoxy)benzene,J.Polym.Sci.Part A: Polym.Chem.,39,2581(2001)
18 J.G.Liu,X.J.Zhao,L.Fan,S.Y.Yang,G.L.Wu,F.Q.Zhang, Z.B.Li,Organo-soluble fluorinated polyimides derived from 4,4'-bis(3-amino-5-trifluoromethylphenoxy)-3,3', 5,5'-tetramethyl biphenyl and aromatic dianhydrides, High Perform.Polym.,18,145(2006)
[1] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] 刘天福, 张滨, 张均锋, 徐强, 宋竹满, 张广平. 缺口应力集中系数对TC4 ELI合金低周疲劳性能的影响[J]. 材料研究学报, 2023, 37(7): 511-522.