Please wait a minute...
材料研究学报  2004, Vol. 18 Issue (5): 461-465    
  论文 本期目录 | 过刊浏览 |
应力波载荷作用下X70管线钢的应力
沙桂英;韩恩厚;张修丽;徐永波;刘路
中国科学院金属研究所
Stress--strain behavior of X70 pipeline steel under stress wave loading
;;;;
中国科学院金属研究所
引用本文:

沙桂英; 韩恩厚; 张修丽; 徐永波; 刘路 . 应力波载荷作用下X70管线钢的应力[J]. 材料研究学报, 2004, 18(5): 461-465.

全文: PDF(2179 KB)  
摘要: 利用Hopkinson压杆加载装置对国产轧制态X70管线钢进行了冲击压缩实验, 研究了其在高速冲击过程中的组织演变和动态应力--应变行为. 结果表明: 轧制态X70管线钢是以针状铁素体为主的混合组织; 在$\dot{\varepsilon}\leq$2.5$\times$10$^{3}$s$^{-1}$条件下, 铁素体板条内形成了大量的位错胞亚晶结构, 随着应变率增加, 针状铁素体组织显著细化, 致使X70管线钢产生了明显的增强增塑现象.
关键词 金属材料针状铁素体应力-应变行为应变率    
Abstract:The dynamic impact compression experiments for the X70 pipeline steel in rolling condition were carried out using the Hopkinson pressure bar. The structural evolution occurred during the plastic deformation under high strain rate, and the dynamic stress--strain behavior were investigated. The results show that the acicular ferrite dominated microstructure can be obtained for the X70 pipeline steel through rolling processing, and a lot of dislocation cells form in the ferrite laths and the ferrite laths are remarkably fragmentated under the strain rate lower than 2.5$\times$10$^{3}$s$^{-1}$, which leads to the increase in both the strength and the plasticity of the steel.
Key wordsmetallic materials    acicular ferrite    stress-strain behavior    strain rate    microstructure
收稿日期: 2004-11-04     
ZTFLH:  TG113  
1 F.Matsuda, Trends in Welding Research (Gatlinburg Tennessee, 1995) p.541
2 S.Lee, B.C.Kim, D.Kwon, Metall. Trans., 23A, 2803(1992)
3 J.M.Gregg, H.K.Bhadeshia, Acta Mater., 45(2) , 739(1997)
4 ZHAO Mingchun, XIAO Furen, SHAN Yiyin, LI Yuhai, YANG Ke, Acta Metall. Sin., 38(3) , 283(2002) (赵明纯,肖福仁,单以银,李玉海.杨柯,金属学报,38(3) ,283(2002) )
5 A.Ghoul, A.Bouabdallah, J.Petit, Experimental Mechanics, 38(1) , 37(1998)
6 ZHANG Tao, YAO Yuan, CHU Wuyang, QIAO Lijie, Acta Metall. Sin., 38(8) , 844(2002) (张涛,姚远,褚武扬,乔利杰,金属学报,38(8) ,844(2002) )
7 H.Margot-Marette, G.Bardou, J.C.Charbonnier, Corros. Sci., 27, 1009(1987)
8 P.E.Manning, C.E.Lyman, D.J.Duouette, Corrosion, 36(5) , 246(1980)
9 B.C.Kim, N.J.Kim, S.Lee, Metall. Trans., 22A, 139(1991)
10 M.R.Krishandev, R.Ghosh, Metall. Trans., 10A, 1941(1979)
11 P.A.Manohar, T.Chandra, ISIJ Int., 8(7) , 766(1998)
12 J.L.Lee, Y.T.Pan, Mater. Sci. Tech., 8, 236(1992)
13 S.H.Wang, Y.G.Zhang, W.X.Chen, J. Mater. Sci., 36, 1931(2001)
14 J.C.Charbonnier, M.H.Margot, A.M.Brass, Metal. Trans., 16A, 935(1985)
15 S.D.Mann, B.C.Muddle, Mater. Sci. Tech., 13, 299(1997)
16 H.Cimenoglu, E.S.Kayali, Scripta Metall. Mater., 24, 2437(1990)
[1] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] 刘天福, 张滨, 张均锋, 徐强, 宋竹满, 张广平. 缺口应力集中系数对TC4 ELI合金低周疲劳性能的影响[J]. 材料研究学报, 2023, 37(7): 511-522.