|
|
|
| 低碳钢形变强化相变时铁素体织构类型的分析 |
| 杨平1; 崔凤娥1; 常守海1; 孙祖庆2 |
| 1. 北京科技大学 2. 新金属材料国家重点实验室 |
|
引用本文:
杨平; 崔凤娥; 常守海; 孙祖庆 . 低碳钢形变强化相变时铁素体织构类型的分析[J]. 材料研究学报, 2003, 17(5): 510-519.
1 H.Yada, C-M.Li, H.Yamagata, Dynamic γ→α Transformation during Hot Deformation in Iron-Nickel-Carbon Alloys, ISIJ Inter., 40, 200(2000)
2 S.Lee, D.Kwon, Y.K.Lee, O.Kwon, Transformation Strengthening by Thermomechanical Treatments in C-Mn-Ni-Nb Steels, Metall.Mater.Trans, 26A, 1093(1995)
3 M.R.Hickson, P.J.Hurley, R.K.Gibbs, G.L.Kelly, P.D.Hodgson, The Production of Ultrafine Ferrite in Low-Carbon Steel by Strain-Induced Transformation, Metall.Mater.Trans., 33A, 1019(2002)
4 M.Niikura, M.Fujioka, Y.Adachi, A.Matsukura, T.Yokota, Y.Shirota, Y.Hagiwara, New Concepts for Ultra Refinement of Grain Size in Super Metal Project, J.Mater.Processing Tech., 117, 341(2001)
5 Z.Q.Sun, W.Y.Yang, J.J.Qi, A.M.Hu, Deformation Enhanced Transformation and Dynamic Recrystallization of Ferrite in a Low Carbon Steel during Multipass Hot Deformation, Mater.Sci.Eng., A334, 201(2002)
6 YANG Ping(杨平), FU Yunyi(傅云义), CUI Feng'e(崔凤娥), SUN Zuqing(孙祖庆), Characteristics of Strain Enhanced Transformation and Its Influencing Factors in Q235 Plain Carbon Steel Q235． Acta Metall Sin(金属学报), 37, 592(2001)
7 B.Hutchinson, L.Ryde, E.Lindh, K.Tagashira, Texture in Hot Rolled Austenite and Resulting Transformation Products, Mater.Sci.Eng., A257, 9(1998)
8 R.K.Ray, J.J.Jonas, M.P.Butron-Guillen, J.Savoie, Transformation Texture in Steels (Review), ISIJ inter.,34, 927(1994)
9 M.R.Barnett, J.J.Jonas, Influence of Ferrite Rolling Temperature on Grain Size and Texture in Annealed Low C and IF Steels, lSIJ Inter., 37, 706(1997)
10 J.J.Jonas, Effects of Shear Band Formation on Texture Development in Warm-Rolled IF Steels,J.Mater.Processing Tech., 117, 293(2001)
11 R.K.Ray, J.J.Jonas, R.E.Hook, Cold Rolling and Annealing Textures in Low Carbon Steels, Inter.Mater.Reviews, 39, 129(1994)
12 H.Inagaki, Fundamental Aspect of Texture Formation in Low Carbon Steel (Review), ISIJ Inter., 34,313(1994)
13 P.J.Hurley, P.D.Hodgson, B.C.Muddle, Analysis and Characterisation of Ultra-Fine Ferrite Produced during a New Steel Strip Rolling Process, Scripta Mater., 40, 433(1999)
14 C.-M.Park, G.Bruckner, G.Gottstein, Orientation Relationships and Variant Selection during α-to γ-phase Transformation in Low Carbon Steel, Mater.Sci.Forum., 408, 1191(2001)
15 S.C.Hong, K.S.Lee, Influence of Deformation Induced Ferrite Transformation on Grain Refinement of Dual Phase Steel, Mater.Sci.Eng., A323, 148(2002)
16 J .Baczynski, I.DeArdo, J .J .Jonas, Dynamic Recrystallization Textures in Ferrite and Ferritic Stainless Steels,Mater.Sci.Forum., 273, 465(1998)
17 YANG Ping(杨平), FU Yunyi(傅云义), CUI Feng'e(崔凤娥), SUN Zuqing(孙祖庆), Orientational Inspection of Ferrite Grains during Strain Enhanced Transformation in Plain Carbon Stee1 Q235． Acta Metall Sin(金属学报), 37, 900(2001)
18 YANG Ping(杨平), CHANG Shouhai(常守海), CUI Feng'e(崔凤娥), SUN Zuqing(孙祖庆), Orientational Charactetistics of Ferrite during Strain Enhanced Transformation in a Q235 Plain Carbon Steel Investigated by Orientation Mapping Technique, Chinese Journal of Mater. Research(材料研究学报), 16, 251(2002)
19 YANG Ping(杨平), CHANG Shouhai(常守海), SUN Zuqing(孙祖庆), Orientational Analysis of Warm-Compressed Ferrite in a low Carbon Steel by Means of Orientation Mapping(低碳钢热变形过程中铁素体的织构形成规律), Chinese Journal of Materials Research(材料研究学报)17(5) , 520(2003)
20 YANG Ping(杨平), CUI Feng'e(崔凤娥), FU Yunyi(傅云义), SUN Zuqing(孙祖庆), Analysis of σ-ε Curves during Strain Induced Transformation in Q235 Plain Carbon Steel, Acta Metall Sin(金属学报), 37, 609(2001) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
