Please wait a minute...
材料研究学报  2002, Vol. 16 Issue (6): 657-663    
  论文 本期目录 | 过刊浏览 |
热处理对电子束辐射固化环氧树脂的作用效果
隋刚1; 张佐光1 陈昌麒1 ; 孙志杰1 ; 李凤梅2
1. 北京航空航天大学 2. 北京师范大学
引用本文:

隋刚; 张佐光; 陈昌麒; 孙志杰; 李凤梅 . 热处理对电子束辐射固化环氧树脂的作用效果[J]. 材料研究学报, 2002, 16(6): 657-663.

全文: PDF(947 KB)  
摘要: 通过对热处理前后电子束辐射固化环氧树脂的动态力学分析,研究了不同样品的凝胶含量、tanδ以及动态模量的变化规律。结果表明,对电子束辐射固化的环氧树脂进行热处理,可以提高样品的固化程度和玻璃化温度(Tg),热处理后样品的模量随着温度的升高而下降的幅度减少。随着辐射固化度的增加,热处理的影响减弱。当热处理温度超过辐射引发剂的热引发温度时,在样品的tanδ曲线上出现反应局部热交联网络的 松弛峰。在辐射固化度相近的情况下,树脂体系中的引发剂含量和分子量对热处理的效果有重要影响。分子量分布多样性的环氧树脂体系在热处理后的固化程度、Tg以及高温模量都较高。对于同样的环氧树脂体系,经过足够剂量的电子束辐射或进行适宜的热处理,所得固化物的Tg和高温模量均优于热固化样品。
关键词 环氧树脂电子束辐射固化热处理玻璃化    
Key words
收稿日期: 1900-01-01     
1 Nakamura S,The roles of structural imperfections in InGaN-based blue light-emitting diodes and laser diodes, Science,281,956(1998)
2 Lester S S,Ponce F A,Craford M G,High dislocation densities in high efficiency GaN-based LED,Appl.Phys. Lett.,66,1249(1995)
3 Pauc N,Philips M R,Aimez V,Carrier recombina- tion near threading dislocations in GaN epilayers by low voltage cathodoluminescence,Appl.Phys.Lett.,89, 161905(2006)
4 Miraglia P Q,Preble E A,Roskowski A M,Einfeldt S,and Davis R F,Helical-type surface defects in GaN thin films epitaxially grown on GaN templates at reduced tempera- tures,J.Cryst.Growth,253,16(2003)
5 Heying B,Tarsa E J,Eisass C R,Fini P,DenBaars S P. and Speck J S,Dislocation mediated surface morphology of GaN,J.Appl.Phys.,85,6470(1999)
6 Hitoshi S,Sadahiro K,Takeyoshi M,Yoshihiro S, Masayuki I,and Seikoh Y,Investigation of surface pits originating in dislocations in AlGaN/GaN epitaxial layer grown on Si substrate with buffer layer,Jap.J.Appl. Phys.Part I,45,2531(2006)
7 Chen H,Feenstra R M,Norhrup J E,Zywietz T,and Neugebauer,Spontaneous formation of indium-rich nanos- tructures on InGaN(0001) surfaces,J.Phys.Rev.Lett., 85,1902(2000)
8 Du D,Srolovitz D J,Faceted dislocation surface pits,Acta Materialia,52,3365(2004)
9 Michael A R,Hadis M,Luminescence properties of defects in GaN,J.Appl.Phys.,97,061301(2005)
10 Lei H,Leipner H S,Schreiber J,Weyher J L,Wosinski T, and Grzegory I.,Raman and cathodoluminescence study of dislocations in GaN,J.Appl.Phys.,92,6666(2002)
11 Kim C,Kim S,Choi Y,and Leem S J,Correlation between the type of threading dislocations and photoluminescence characteristics at different doping concentrations of Si in GaN films,J.Appl.Phys.,92,6343(2002)
12 Liu J P,Wang Y T,Yang H,Jiang D S,Jahn U,Ploog K H.,Investigations on V-defects in quaternary AlInGaN epilayers,Appl.Phys.Lett.,84,5449(2004)
13 Pauc N,Phillips M R,Aimez V,and Drouin D.,Carrier re- combination near threading dislocations in GaN epilayers by low voltage cathodoluminescence,Appl.Phys.Lett., 89,161905(2006)
14 Li S Y,Zhu J.,Al diffusion in GaN buffer layer during the growth of GaN film,J.Cryst.Growth,203,473(1999)
15 Fung S,Xu X L,Zhao Y W,Sun W H,Chen X D,Sun N F,Sun T N and Jiang C X.,Gallium/aluminum interdif- fusion between n-GaN and sapphire,J.Appl.Phys.,84, 2355(1998)
16 Koleske D D,Wickenden A E,Henry R L,DeSisto W J,and Gorman R J.,Growth model for GaN with com- parison to structural,optical,and electrical properties,J. Appl.Phys.,84,1998(1998)
17 Kato Y,Kitamura S,Hiramatsu K,and Sawaki N., Selective growth of wurtzite GaN and Al_xGa_(1-x)N on GaN/sapphire substrates by metalorganic vapor phase epitaxy,J.Cryst.Growth,144,133(19
[1] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[2] 叶姣凤, 王飞, 左洋, 张钧翔, 罗晓晓, 冯利邦. 兼具高强度、高韧性和自修复性能的环氧树脂改性热可逆聚氨酯[J]. 材料研究学报, 2023, 37(4): 257-263.
[3] 赵云梅, 赵洪泽, 吴杰, 田晓生, 徐磊. 热处理对粉末冶金Inconel 718合金TIG焊接的组织和性能的影响[J]. 材料研究学报, 2023, 37(3): 184-192.
[4] 徐阳, 李彦睿, 刘宝胜, 刘雯, 张少华, 卫英慧. 无取向硅钢中第二相的析出行为[J]. 材料研究学报, 2023, 37(1): 47-54.
[5] 王伟, 周山琦, 宫鹏辉, 张浩泽, 史亚鸣, 王快社. 退火温度对TC4钛合金热轧板材的显微组织、织构和力学性能影响[J]. 材料研究学报, 2023, 37(1): 70-80.
[6] 赵鹏, 董英杰, 李响, 陈斌, 张英. 界面强度对柔性环氧树脂/粘土纳米复合材料热/力学性能的影响[J]. 材料研究学报, 2022, 36(6): 454-460.
[7] 王琨, 杨仁贤, 蔡欣, 郑雷刚, 胡小强, 李殿中. 微量Ce元素对高铬高钴型马氏体耐热钢力学性能的影响[J]. 材料研究学报, 2022, 36(4): 261-270.
[8] 汪鹏, 卢希龙, 曹春娥, 陈云霞, 沈华荣, 张旭. 成核-生长型液-液分相对无铅低温熔剂性能的影响[J]. 材料研究学报, 2021, 35(9): 657-666.
[9] 季亚明, 杨雅茹, 姚勇波, 李佳倩, 沈小军, 刘淑强. 碳纳米球基氮--硫复合阻燃剂的合成及其对环氧树脂的阻燃性能[J]. 材料研究学报, 2021, 35(12): 918-924.
[10] 杜邦登, 刘军, 王晓婉, 汪伟, 陈德敏. 热处理对Al-Mg-Ga-In-Sn合金微观结构和铝水反应的影响[J]. 材料研究学报, 2021, 35(1): 25-35.
[11] 王伟, 宫鹏辉, 张浩泽, 史亚鸣, 王萌, 张晓锋, 王快社. 电子束冷床熔炼TC4钛合金的热变形行为[J]. 材料研究学报, 2020, 34(9): 665-673.
[12] 杨梦, 李承波, 刘胜胆, 叶凌英, 唐建国, 廖泽鑫. 人工时效对7003/7046铝合金搅拌摩擦焊接头组织和力学性能的影响[J]. 材料研究学报, 2020, 34(7): 495-504.
[13] 陈斌,裴鑫鹏,徐扬,张英. 反应型有机修饰剂对环氧树脂/粘土纳米复合材料热/机械性能的影响[J]. 材料研究学报, 2020, 34(3): 161-168.
[14] 王志虎,张菊梅,白力静,张国君. 水热处理对AZ31镁合金微弧氧化陶瓷层组织结构及耐蚀性的影响[J]. 材料研究学报, 2020, 34(3): 183-190.
[15] 陈少杰, 徐艳英, 王志, 胡泊. 低热通量下碳纤维/环氧树脂层合板的燃烧特性[J]. 材料研究学报, 2020, 34(12): 933-938.