|
|
脉冲激光熔覆制备钛合金的柱状组织涂层 |
王维夫;孙凤久;王茂才 |
东北大学理学院 |
|
Study of Columnar Microstructure Coating of Titanium Alloy Prepared by Pulse Laser Cladding |
; |
引用本文:
王维夫; 孙凤久; 王茂才 . 脉冲激光熔覆制备钛合金的柱状组织涂层[J]. 材料研究学报, 2008, 22(3): 322-322.
,
,
.
Study of Columnar Microstructure Coating of Titanium Alloy Prepared by Pulse Laser Cladding[J]. Chin J Mater Res, 2008, 22(3): 322-322.
1 Z.Y.Ma,A.L.Pilchak,M.C.Juhas,J.C.Williams,Mi- crostructural refinement and property enhancement of cast light alloys via friction stir processing,Scripta Ma- terialia,58(5),361(2008) 2 XIAO Xuan,GUO Jianting,YU Haipeng,Effect of cooling rate from solution heat treatment on the microstructure and mechanical properties of superalloy DZ417G,Chinese Journal of Materials Research,20(5),533(2006) (肖旋,郭建亭,于海朋,固溶处理冷却速度对DZ417G合金组织性能的影响,材料研究学报,20(5),533(2006)) 3 LIU Liming,DU Xin,ZHU Meili,CHEN Guoqing,Re- search on the microstructure and properties of weld repairs in TA15 titanium alloy,Materials Science and Engineer- ing:A,445-446(2),691(2007) 4 WANG Yaoning,MA Hongzhou,GUO Zhijun,ZHAO Xicheng,Effects of heat treatment on microstructure and properties of BT-20 alloy,Hot Working Technology, 36(12),52(2007) (王耀宁,马红周,郭志军,赵西城,热处理对BT-20钛合金组织和性能的影响,热加工工艺,36(12),52(2007)) 5 M.Mckellen,CHEN Shiqing,CHEN Rongzhang,Direc- tional Solidification of High-Temperature Material(Bei- jing,Aviation Industry Press,1988)p.121 (M.麦克莱恩,陈石卿,陈荣章,定向凝固高温材料(北京,航空工业出版社,1988)p.121) 6 XIE Yujiang,WANG Maocai,HUANG Dawei,Compar- ative study of microstructural characteristics of electro- spark and Nd:YAG laser epitaxially growing coatings,Ap- plied Surface Science,253(14),6149(2007) 7 LIAO Xiliang,ZHAI Qijie,SONG Changjiang,CHEN Wenjie,GONG Yongyong,Effects of electric current pulse on stability of solid/liquid interface of Al-4.5 wt.% Cu al- loy during directional solidification,Materials Science and Engineering:A,466(1-2),56(2007) 8 M.G(?)nd(?)z,H.Kaya,Effect of solidification processing pa- rameters on the cellular spacings in the Al-0.1wt% Ti and Al-0.5wt% Ti alloys,Journal of Alloys and Compounds, 439(1-2),114(2007) 9 W.Kurz,D.J.Fisher,Fundamentals of Solidification,(En- field,Trails Tech Publications Ltd,1998)p.86-88 10 M.Balasubramanian,V.Jayabalan,V.Balasubramanian, Effect of microstructure on impact toughness of pulsed current GTA weldedα-βtitanium alloy,Materials Let- ters,62(6-7),1102(2008) 11 N.Vanderesse,E.Maire,M.Darrieulat,F.Montheillet, M.Moreaud,D.Jeulin,Three-dimensional microtomo- graphic study of Widmanst(?)tten microstructures in an alpha/beta titanium alloy,Scripta Materialia,58(6), 512(2008) 12 YAO Wei,GONG Shuili,CHEN Li,Effects of postweld heat treatment in vacuum on properties of laser welded joint of BT20 titanium alloy,Welding,6,21(2003) (姚伟,巩水利,陈俐,焊后真空热处理对BT20钛合金激光焊接接头性能的影响,焊接,6,21(2003)) 13 K.Keshava Murthy,S.Sundaresan,Phase transformations in a welded near-αtitanium alloy as a function of weld cooling rate and post-weld heat treatment conditions, Journal of Materials Science,33(3),817(1998) 14 W.A.Baeslack,F.D.Mullins,Phase transformations in a welded near-alpha titanium alloy-IMI 829,Journal of Ma- terials Science Letters,1(9),371(1982) 15 N.A.Berjeza,S.P.Velikevitch,V.I.Mazhukin,I.Smurov and G.Flamant,Influence of temperature gradient to solidifi- cation velocity ratio on the structure transformation in pulsed-and CW-laser surface treatment,Applied Surface Science,86(1-4),303(1995){ |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|