|
|
|
| Al对GH4169合金冲击性能的影响 |
| 刘芳;孙文儒;杨树林;赵长虹;魏志坚;郭守仁;杨洪才;胡壮麒 |
| 东北大学材料与冶金学院;中国科学院金属研究所 |
|
| ; |
| 中国科学院金属研究所 |
引用本文:
刘芳; 孙文儒; 杨树林; 赵长虹; 魏志坚; 郭守仁; 杨洪才; 胡壮麒 . Al对GH4169合金冲击性能的影响[J]. 材料研究学报, 2008, 22(3): 230-234.
,
,
,
,
,
,
,
.
[J]. Chin J Mater Res, 2008, 22(3): 230-234.
1 R.Cozar,A.Pineau,Morphology ofγ′andγ″precipitates and thermal stability of Inconel 718 type alloys,Metall. Trans.,4,47(1973)
2 J.P.Collier,S.H.Wong,J.C.Philips,J.K.Tien,The effect of varying Al,Ti and Nb content on the phase stability of Inconel 718,Metall.Trans.,19A,1657(1988)
3 J.X.Dong,X.S.Xie,S.Zhang,Influence of associated and separated precipitation ofγ″andγ′on structure stabil- ity in Inconel 718 and modified alloys,Acta Metallurgica Sinica,6A,410(1993)
4 J.X.Dong,X.S.Xie,S.Zhang,Enhancement of thermal structure stability in a Ni-base superalloy,Scripta Met- allurgica,28,1477(1993)
5 E.Guo,F.Q.Xu,E.A.Loria,Further studies on thermal stability,in:Superalloys 718,625,706 and Various Deriv- atives,E.A.Loria ed.,(Warrendale,PA:TMS,USA,1994) p.721
6 F.Q.Xu,E.Guo,E.A.Loria,Thermal stability of modified 718 alloys aged for 2000 hours at 700℃,in:Superal- loys 718,625,706 and Various Derivatives,E.A.Loria ed.,(Warrendale,PA:TMS,USA,1997)p.503
7 W.D.Cao,R.L.Kennedy,Improving stress ruptrue life of alloy 718 by optimizing Al,Ti,P and B contents, in:Superalloys 718,625,706 and Various Derivatives, E.A.Loria ed.,(Warrendale,PA:TMS,USA,2001)p.477
8 XIE Xishan,DONG Jianxin,Investigation on modified nickel-base superalloy with combined precipitation ofγ″andγ′,Trans.of Metal Heat Treatment,18(3),37(1997) (谢锡善，董建新，γ″和γ′复合析出强化新型镍基高温合金的研究，金属热处理学报，18(3)，37(1997))
9 X.S.Xie,J.X.Dong,G.L.Wang,W.You,The effect of Nb, Ti,Al on precipitation and strengthening behavior of 718 type superalloys,in:Superalloys 718,625,706 and Var- ious Derivatives,E.A.Loria ed.,(Warrendale,PA:TMS, USA,2005)p.287
10 The Council of Editors of“China Aeronautical Materi- als Handbook”,China Aeronautical Materials Handbook, Vol.ⅡWrought superalloy cast superalloy(Beijing,Stan- dards Press of China,2002) (《中国航空材料手册》编辑委员会编，中国航空材料手册，第二卷变形高温合金铸造高温合金(北京，中国标准出版社，2002))
11 FU Shuhong,DONG Jiangxin,ZhANG Maicang,XIE Xis- han,Research of modified GH4169 alloy,in:Proc.of the 11th Chinese Superalloy on the High Temperature Struc- tural Materials for Power and Energy Sources(Beijing, Metallurgical Industry Press,2007)p.151 (付书红，董建新，张麦仓，谢锡善，改型GH4169合金的研究，第十一届中国高温合金年会论文集(北京，冶金工业出版社，2007)p．151)
12 HUANG Qianyao,LI Hankang,Superalloy(Beijing,Met- allurgical Industry Press,2000)p.47 (黄乾尧，李汉康，高温合金(北京，冶金工业出版社，2000)p．47)
13 A.K.Jena,M.C.Chaturvedi,Role of alloying elements in the design of Nickel-base superalloys,Journal of Materials Science,19(10),3121(1984)
14 SONG Hongwei,Effects of phosphorus on microstructure evolution and mechanical properties of IN718 alloy,PhD Thesis,Institute of Metal Research,The Chinese Academy of Sciences(1999) (宋洪伟，磷对IN718合金组织演化和力学性能的影响，博士学位论文，中国科学院金属研究所沈阳(1999)) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
