Please wait a minute...
Chin J Mater Res  2011, Vol. 25 Issue (1): 57-60    DOI:
论文 Current Issue | Archive | Adv Search |
Micro–arc Oxidation and Sol–Gel Composite Coatings on Magnesium Alloy
SHANG Wei1,2,   CHEN Baizhen1,   SHI Xichang1,    WEN Yuqing2
1.College of Metallurgical Science and Engineering, Central South University, Changsha 410083
2.College of Chemistry and Bioengineering, Guilin University of Technology, Guilin 541004
Cite this article: 

SHANG Wei CHEN Baizhen SHI Xichang WEN Yuqing. Micro–arc Oxidation and Sol–Gel Composite Coatings on Magnesium Alloy. Chin J Mater Res, 2011, 25(1): 57-60.

Download:  PDF(808KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Protective composite coatings were obtained on a magnesium alloy by micro–arc oxidation (MAO) and sol–gel technique. The cross–section morphologies and composition of the MAO coating and composite coatings were analyzed by scanning electron microscopy (SEM) and energy dispersive X–rays (EDX). The phase structure of the composite coatings was analyzed by X–ray diffractometer (XRD). The corrosion resistance of MAO coating and composite coatings in a 3.5% (mass fraction) NaCl solution was evaluated by potentiodynamic polarisation measures. The results show that SiO2–ZrO2 sol can effectively seal the micropores in the MAO coating, and the composite coatings are more compact and have good adhesion. The composite coatings are composed of MgO, MgAl2O4, SiO2 and ZrO2. The corrosion resistance of the sample with composite coatings is enhanced significantly.
Key words:  materials failure and protection       magnesium alloy       micro–arc oxidation       sol–gel       composite coatings       corrosion resistance     
Received:  28 June 2010     
ZTFLH: 

TG146

 
Fund: 

Supported by National Key Technology R & D Program of China No.2006BAB09B04, and the Project of Guangxi Education Department No.200911MS110.

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2011/V25/I1/57

1 MA Ying, ZHANG Hongfeng, HAO Yuan, CHEN Tijun, LI Yuandong, GAO Wei, Interaction of heat–treatment and micro–arc oxidation on AZ91D magnesium alloys, Chinese Journal of Materials Research, 23(6), 656(2009)

(马颖, 张洪峰, 郝远, 陈体军, 李元东, 高唯, AZ91D镁合金热处理与微弧氧化的交互作用, 材料研究学报,  23(6), 656(2009))

2 JIN Fanya, CHU Paul K., XU Guidong, ZHAO Jun, TANG Deli, TONG Honghui, Structure and mechanical properties of magnesium alloy treated by micro–arc discharge oxidation using direct current and high–frequency bipolar pulsing modes, Materials Science and Engineering: A, 435–436, 123(2006)

3 WANG Xuemin, ZENG Xiaoqin, WU Guosong, YAO Shoushan, LAI Yijian, Effects of tantalum ion implantation on the corrosion behavior of AZ31 magnesium alloys, Journal of Alloys and Compounds, 437(1–2), 87(2007)

4 CHEN Changjun, WANG Maocai, WANG Dongsheng, JIN Ren, LIU Yiming, Microstructure and corrosion behavior of Mg–Nd coatings on AZ31 magnesium alloy produced by high–energy micro–arc alloying process, Journal of Alloys and Compounds, 438(1–2), 321(2007)

5 JIANG Kuisheng, TANG Yuming, ZHAO Xuhui, ZUO Yu, Influences of the current density on surface morphology and adhesion of anodic films of AZ91D magnesium alloy, Chinese Journal of Materials Research, 24(3), 305(2010)

(蒋奎胜, 唐聿明, 赵旭辉, 左禹, 电流密度对AZ91D镁合金阳极氧化膜表面形貌及粘接性能的影响, 材料研究学报,  24(3), 305(2010))

6 YANG Wei, JIANG Bailing, SHI Huiying, XIAN Linyun, Microstructure and corrosion resistance of composite coating on magnesium alloy by micro–arc oxidation and electrophoresis,

Chinese Journal of Materials Research, 23(4), 421(2009)

(杨巍, 蒋百灵, 时惠英, 鲜林云, 镁合金微弧电泳复合膜层的微观结构和抗腐蚀性能, 材料研究学报,  23(4), 421(2009))

7 CUI Zuoxing, SHAO Zhongcai, LIU Zhiyuan, ZHAO Lixin, TIAN Yanwen, Effects of additives on properties of ceramic coatings formed by micro–arc oxidation on AZ91D Mg alloy, Chinese Journal of Materials Research, 23(2), 193(2009)

(崔作兴, 邵忠财, 刘志远, 赵立新, 田彦文, 添加剂对镁合金微弧氧化膜性能的影响, 材料研究学报,  23(2), 193(2009))

8 GUO Hongfei, AN Maozhong, Growth of ceramic coatings on AZ91D magnesium alloys by micro–arc oxidation in aluminate–fluoride solutions and evaluation of corrosion resistance, Applied Surface Science, 246(1–3), 229(2005)

9 A.L.Yerokhin, A.Shatrov, V.Samsonov, P.Shashkov, A.Leyland, A.Matthews, Fatigue properties of Keronite coatings on a magnesium alloy, Surface and Coatings Technology, 182(1), 78(2004)

10 L.O.Snizhko, A.L.Yerokhin, A.Pilkington, N.L.Gurevina, D.O.Misnyankin, A.Leyland, A.Matthews, Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions, Electrochimica Acta, 49(13), 2085(2004)

11 SHANG Wei, CHEN Baizhen, SHI Xichang, XIAO Xiang, Effect of electrolyte additives on performance of micro–arc oxidation films formed on magnesium alloy AZ91D, Rare Metal Materials and Engineering, 38(2), 335(2009)

(尚伟, 陈白珍, 石西昌, 肖湘, 添加剂对AZ91D镁合金微弧氧化膜的影响, 稀有金属材料与工程,  38(2), 335(2009))

12 C.Blawert, V.Heitmann, W.Dietzel, H.M.Nykyforchyn, M.D.Klapkiv, Influence of process parameters on the corrosion properties of electrolytic conversion plasma coated magnesium alloys, Surface and Coatings Technology, 20(1–4), 68(2005)

13 SHANG Wei, CHEN Baizhen, SHI Xichang, CHEN Ya, XIAO Xiang, Electrochemical corrosion behavior of composite MAO/sol–gel coatings on magnesium alloy AZ91D using combined micro–arc oxidation and sol–gel technique, Journal of Alloys and Compounds, 474(1–2), 541(2009)

14 BAI Allen, CHUANG Poyao, HU Chichang, The corrosion behavior of Ni–P deposits with high phosphorous contents in brine media, Materials Chemistry and Physics, 82(1), 93(2003)

15 YAO Zhongping, JIANG Zhaohua, SUN Xuetong, XIN Shigang, WU Zhendong, Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti–6Al–4V alloy produced by micro–plasma oxidation, Materials Chemistry and Physics, 92(2–3), 408(2005)

16 LIANG Jun, HU Litian, HAO Jingcheng, Improvement of corrosion properties of microarc oxidation coating on magnesium alloy by optimizing current density parameters, Applied Surface Science, 253(16), 6939(2007)

17 DUAN Hongping, DU Keqin, YAN Chuanwei, WANG Fuhui, Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D, Electrochimica Acta, 51(14), 2898(2006)

18 SHI Huiying, YANG Wei, JIANG Bailing, Corrosion performance of micro–arc–oxidation and electrophoresis complex coatings on magnesium alloy, Corrosion and Protection, 28(9), 442(2009)

(时惠英, 杨 巍, 蒋百灵, 镁合金微弧氧化--电泳复合膜层的腐蚀性能, 腐蚀与防护,  28(9), 442(2009))
[1] LI Pengyu, LIU Zitong, KANG Shumei, CHEN Shanshan. Effect of Plasma Treatment on Performance of Polybutylene Adipate Coating on Biomedical AZ31 Mg-alloy[J]. 材料研究学报, 2023, 37(4): 271-280.
[2] LIAO Hongyu, JIA Yongxin, SU Ruiming, LI Guanglong, QU Yingdong, LI Rongde. Effect of Retrogression Times on Microstructure and Corrosion Resistance of 2024 Aluminum Alloy[J]. 材料研究学报, 2023, 37(4): 264-270.
[3] CHEN Jie, LI Hongying, ZHOU Wenhao, ZHANG Qingxue, TANG Wei, LIU Dan. Effect of Heat Input on Low Temperature Toughness and Corrosion Resistance of Q1100 Steel Welded Joints[J]. 材料研究学报, 2022, 36(8): 617-627.
[4] GAO Wei, LIU Jiangnan, WEI Jingpeng, YAO Yuhong, YANG Wei. Structure and Properties of Cu2O Doped Micro Arc Oxidation Coating on TC4 Titanium Alloy[J]. 材料研究学报, 2022, 36(6): 409-415.
[5] YANG Liuyang, TAN Zhuowei, LI Tongyue, ZHANG Dalei, XING Shaohua, JU Hong. Dynamic Corrosion Behavior of Pipeline Defects Characterized by WBE and EIS Testing Techniques[J]. 材料研究学报, 2022, 36(5): 381-391.
[6] LI Yufeng, ZHANG Nianfei, LIU Lishuang, ZHAO Tiantian, GAO Wenbo, GAO Xiaohui. Preparation of Phosphorus-containing Graphene and Corrosion Resistance of Composite Coating[J]. 材料研究学报, 2022, 36(12): 933-944.
[7] LI Rui, WANG Hao, ZHANG Tiangang, NIU Wei. Microstructure and Properties of Laser Clad Ti2Ni+TiC+Al2O3+CrxSy Composite Coating on Ti811 Alloy[J]. 材料研究学报, 2022, 36(1): 62-72.
[8] CHEN Yiwen, WANG Cheng, LOU Xia, LI Dingjun, ZHOU Ke, CHEN Minghui, WANG Qunchang, ZHU Shenglong, WANG Fuhui. Protective Performance of a Novel Inorganic Composite Coatings on CB2 Ferritic Heat Resistant Steel at 650℃ in Oxygen Flow with Water Vapor[J]. 材料研究学报, 2021, 35(9): 675-681.
[9] LI Lingmei, HUANG Huizhen, ZHANG Qinghuan, SHUAI Gewang. Effect of P on Properties of Sn-9Zn-0.1S Lead-Free Solder[J]. 材料研究学报, 2021, 35(8): 615-622.
[10] GU Jiaqing, TANG Weineng, XU Shiwei. Microstructure Evolution During Tensile Deformation of an Extruded Mg-0.4Zn Alloy Plate[J]. 材料研究学报, 2021, 35(7): 553-560.
[11] HAO Xinxin, XI Tong, ZHANG Hongzhen, YANG Chunguang, YANG Ke. Effect of Quenching Temperature on Microstructure and Properties of Cu-bearing 5Cr15MoV Martensitic Stainless Steel[J]. 材料研究学报, 2021, 35(12): 933-941.
[12] ZHANG Dalei, WEI Enze, JING He, YANG Liuyang, DOU Xiaohui, LI Tongyue. Construction of Super-hydrophobic Structure on Surface of Super Ferritic Stainless Steel B44660 and Its Corrosion Resistance[J]. 材料研究学报, 2021, 35(1): 7-16.
[13] WANG Guanyi, CHE Xin, ZHANG Haoyu, CHEN Lijia. Low-cycle Fatigue Behavior of Al-5.4Zn-2.6Mg-1.4Cu Alloy Sheet[J]. 材料研究学报, 2020, 34(9): 697-704.
[14] HUANG Anran, ZHANG Wei, WANG Xuelin, SHANG Chengjia, FAN Jiajie. Corrosion Behavior of Ferritic Stainless Steel in High Temperature Urea Environment[J]. 材料研究学报, 2020, 34(9): 712-720.
[15] GONG Weiwei, YANG Bingkun, CHEN Yun, HAO Wenkui, WANG Xiaofang, CHEN Hao. In Situ SECM Observation of Corrosion Behavior of Carbon Steel at Defects of Epoxy Coating under AC Current Conditions[J]. 材料研究学报, 2020, 34(7): 545-553.
No Suggested Reading articles found!