Please wait a minute...
Chin J Mater Res  2010, Vol. 24 Issue (2): 149-153    DOI:
论文 Current Issue | Archive | Adv Search |
Effect of Nitrogen Element in the Graphitization of Carbon Fibre
GAO Aijun; JIN Yuwei; XU Lianghua
Key Laboratory of Carbon Fibre and Functional Polymer; Ministry of Education; School of Materials science and technology; Beijing University of Chemical Technology; Beijing 100029
Cite this article: 

GAO Aijun JIN Yuwei XU Lianghua. Effect of Nitrogen Element in the Graphitization of Carbon Fibre. Chin J Mater Res, 2010, 24(2): 149-153.

Download:  PDF(687KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Graphite fibers of Different nitrogen content was prepared. The element composition and crystallite structure of resulted fibers were investigated by means of element analysis, X-ray diffraction and Raman spectroscopy. The correlation between crystallite structure and nitrogen content of these fibers was investigated. The results show that, with decrease of nitrogen content, the graphite crystallite grow, crystallite orientation degree and graphitization degree increase. Crystallite size, crystallite orientation degree and graphitization degree increase slowly because of the distortion of the graphite layer with nitrogen atom when the fibers contain more than 0.08% nitrogen element. As nitrogen content is below 0.08%, the crystallite size, crystallite orientation degree and graphitization degree increase rapidly. Denitrogenation is control step of the growth of graphite crystallite containing nitrogen atom, but can't lead to the growth of graphite crystallite directly.

Key words:  inorganic non-metallic materials              graphitization        elemental content       crystallite structure       orientation degree       graphitization degree     
Received:  24 December 2009     
Fund: 

国家重点基础研究发展计划2006CB605302资助项目。

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y2010/V24/I2/149

1 LIU Hongbo, XU Zhongyu, ZHANG Hongbo, SU Yuchang, The effect of heat-treatment temperature on the structure and mechanical properties of carbon fiber, Synthetic Fiber Industry, 18(6), 18(1995) (刘洪波, 徐仲榆, 张红波, 苏玉长, 高温热处理温度对PAN基碳纤维结构和力学性能的影响, 合成纤维工业,   18(6), 18(1995)) 2 LIU Fujie, WANG Haojing, FAN Lidong, The change of density under high temperature heat treatment in PAN-based carbon fibers, New Chemical Materials, 35(1), 43(2007) (刘福杰, 王浩静, 范立东, PAN碳纤维在高温石墨化过程中密度的变化规律, 化工新型材料, 35(1), 43(2007)) 3 R.B.Mathur, V.Gupta, O.P.Bahl, A.Tressaud, S.Flandrois. Improvement in the mechanical properties of polyacryloaitrile (PAN)-based carbon fibers after fluorination. Synthetic Metals, 114(2), 197(2000) 4 J.Kim, W.I.Lee, K.Lafdi, Numerical modeling of the carbonization process in the manufacture of carbon/carbon composites, Carbon, 41(13), 2625(2003) 5 CHEN Tengfei, HUANG Boyun, LIAO Jiqiao, LIU Genshan, ZHANG Fuqin, Effect of heat-treatment temperature on microstructure and mechanical performance of PAN-based carbon fibers, Journal of Functional Materials, 33(4), 447(2002) (陈腾飞, 黄伯云, 廖寄乔, 刘根山, 张福勤, 热处理温度对PAN基炭纤维结构的影响, 功能材料,  33(4), 447(2002)) 6 CHAGN Weipu, SHEN Zengmin, WANG Qiang, Manufacture of high modulus graphitized carbon fibers, New Carbon Materials, 13(1), 28(1998) (常维璞, 沈曾民, 王强, 高模量炭纤维的研制, 新型炭材料,  13(1), 28(1998)) 7 ZHANG Weiqin, TIAN Yanhong, YANG Yanfeng, Zhang Xiping, Sheng Zengmin, Study on the surface morphology of the HTT carbon fibers by SEM , New CarbonM aterials, 16(3), 52(2001)) (张为芹, 田艳红, 杨延风, 张西萍, 沈曾民, 高温热处理对炭纤维性能的影响, 新型炭材料,  16(3), 52(2001)) 8 XUE Linbing, WANG Haojing, LI Dongfeng, Effect of stress graphitization on the microstructure and mechanical properties of graphite fibers, New Carbon Materials, 21(3), 243(2006) (薛林兵, 王浩静, 李东风, 牵伸石墨化对石墨纤维结构和力学性能的影响, 新型炭材料,  21(3), 243(2006)) 9 LI Dongfeng, WANG Haojing, XUE Linbing, WANG Xinkui, Preferred orientation of Pan-based carbon fibers during continuous graphitization, Chemical Industry and Engineering Progress, 25(9), 1101(2006) (李东风, 王浩静, 薛林兵, 王心葵, PAN基碳纤维连续石墨化过程中的取向性, 化工进展,  25(9), 1101(2006)) 10 XU Zhongyu, LIU Hongbo, SU Yuchang, YANG Ruizhi, GONG Weizhi, Using hot stretching in graphitization to prepare PAN-based of high properties, Carbon, 3, 4(1997) (徐仲榆, 刘洪波, 苏玉长, 杨瑞枝, 龚伟志, 在石墨化过程中采用热牵伸法制备高性能PAN基炭纤维, 炭素,  3, 4(1997)) 11 HE Fu, Carbon Fiber and its Application Technology (Beijing, Chemical industry press, 2004) p.86 (贺福,  碳纤维及其应用技术, (北京, 化学工业出版社, 2004) p.86) 12 J.Chen, J.Y.Shan, T.Tsukada, F.Munekane, A.Kuno, M.Matsuo, T.Hayashi, Y.A.Kim, M.Endo, The structural evolution of thin multi-walled carbon nanotubes during isothermal annealing. Carbon, 45, 274(2007) 13 A.Sadezky, H.Muckenhuber, H.Grothe, Raman microspectroscopy of soot and related carbonaceous materials: Spectrl analysis and structural information, Carbon, 43, 1731(2005)
[1] SONG Lifang, YAN Jiahao, ZHANG Diankang, XUE Cheng, XIA Huiyun, NIU Yanhui. Carbon Dioxide Adsorption Capacity of Alkali-metal Cation Dopped MIL125[J]. 材料研究学报, 2023, 37(9): 649-654.
[2] SHAO Hongmei, CUI Yong, XU Wendi, ZHANG Wei, SHEN Xiaoyi, ZHAI Yuchun. Template-free Hydrothermal Preparation and Adsorption Capacity of Hollow Spherical AlOOH[J]. 材料研究学报, 2023, 37(9): 675-684.
[3] REN Fuyan, OUYANG Erming. Photocatalytic Degradation of Tetracycline Hydrochloride by g-C3N4 Modified Bi2O3[J]. 材料研究学报, 2023, 37(8): 633-640.
[4] LIU Mingzhu, FAN Rao, ZHANG Xiaoyu, MA Zeyuan, LIANG Chengyang, CAO Ying, GENG Shitong, LI Ling. Effect of Photoanode Film Thickness of SnO2 as Scattering Layer on the Photovoltaic Performance of Quantum Dot Dye-sensitized Solar Cells[J]. 材料研究学报, 2023, 37(7): 554-560.
[5] LI Yanwei, LUO Kang, YAO Jinhuan. Lithium Ions Storage Properties of Ni(OH)2 Anode Materials Prepared with Sodium Dodecyl Sulfate as Accessory Ingredient[J]. 材料研究学报, 2023, 37(6): 453-462.
[6] YU Moxin, ZHANG Shuhai, ZHU Bowen, ZHANG Chen, WANG Xiaoting, BAO Jiamin, WU Xiang. Preparation of Nitrogen-doped Biochar and its Adsorption Capacity for Co2+[J]. 材料研究学报, 2023, 37(4): 291-300.
[7] ZHU Mingxing, DAI Zhonghua. Study on Energy Storage Properties of SrSC0.5Nb0.5O3 Modified BNT-based Lead-free Ceramics[J]. 材料研究学报, 2023, 37(3): 228-234.
[8] LIU Zhihua, YUE Yuanchao, QIU Yifan, BU Xiang, YANG Tao. Preparation of g-C3N4/Ag/BiOBr Composite and Photocatalytic Reduction of Nitrate[J]. 材料研究学报, 2023, 37(10): 781-790.
[9] ZHOU Yi, TU Qiang, MI Zhonghua. Effect of Preparing Methods on Structure and Properties of Phosphate Glass-ceramics[J]. 材料研究学报, 2023, 37(10): 739-746.
[10] XIE Feng, GUO Jianfeng, WANG Haitao, CHANG Na. Construction of ZnO/CdS/Ag Composite Photocatalyst and Its Catalytic and Antibacterial Performance[J]. 材料研究学报, 2023, 37(1): 10-20.
[11] FANG Xiangming, REN Shuai, RONG Ping, LIU Shuo, GAO Shiyong. Fabrication and Infrared Detection Performance of Ag-modified SnSe Nanotubes[J]. 材料研究学报, 2022, 36(8): 591-596.
[12] LI Fulu, HAN Chunmiao, GAO Jiawang, JIANG Jian, XU Hui, LI Bing. Temperature Dependent Luminescence Properties of Graphene Oxide[J]. 材料研究学报, 2022, 36(8): 597-601.
[13] ZHU Xiaodong, XIA Yangwen, YU Qiang, Yang Daixiong, HE Lili, FENG Wei. Preparation and Characterization of Cu Doped Rutile TiO2 and Photocatalytic Property[J]. 材料研究学报, 2022, 36(8): 635-640.
[14] XIONG Tinghui, CAI Wenhan, MIAO Yu, CHEN Chenlong. Simultaneous Epitaxy Growth and Photoelectrochemical Performance of ZnO Nanorod Arrays and Films[J]. 材料研究学报, 2022, 36(7): 481-488.
[15] MENG Xiangdong, ZHEN Chao, LIU Gang, CHENG Huiming. Controlled Synthesis of CuO Nanoarrays as Efficient Photocathodes for Photoelectrochemical (PEC) for Water Splitting[J]. 材料研究学报, 2022, 36(4): 241-249.
No Suggested Reading articles found!