|
|
|
| Mechanism of Lowering the Sintering Temperature of Al2O3 Ceramic by the Addition of CuO–TiO2 (II) |
| WANG Huanping1; ZHANG Bin1; MA Hongping2; XU Shiqing1; LI Denghao1; ZHOU Guangmiao1 |
1.College of Materials Science and Engineering; China Jiliang University; Hangzhou 310018
2.School of Mechanical & Automotive Engineering; Zhejiang University of Science and Technology; Hangzhou 310012 |
|
Cite this article:
WANG Huanping ZHANG Bin MA Hongping XU Shiqing LI Denghao ZHOU Guangmiao. Mechanism of Lowering the Sintering Temperature of Al2O3 Ceramic by the Addition of CuO–TiO2 (II). Chin J Mater Res, 2010, 24(1): 37-43.
|
|
|
Abstract The effects of CuO and TiO2 additives on the sintering behavior, microstructure, phase composition, sintering activation energy and the mechanism of lowering the sintering temperature of Al2O3 ceramics have been investigated. The TiO2 began to dissolve into Al2O3 and formed Al2Ti7O15 solid solution at the sintering temperature of 1150–1200oC , and the diffusion coefficient improved largely with the augment of Al 3+ vacancy concentration, which was the essential reason why the sintering process of A12O3 ceramic had been promoted by the TiO2 addition. However, the solid solubility limit of TiO2 was 2%–4% (mass fraction), and it was unuseful for lowering the sintering temperature of A12O3 ceramic by doping superfluous TiO2. The temperature of TiO2 dissolved into Al2O3 could be lowed down to 1100 with the addition of 0.4% CuO, which was effective to promote the sintering process of A12O3 ceramic. The sintering activation energy of alumina ceramic doped with different CuO–TiO2 was consistent with the above results. The sintering activation energy of A12O3 ceramic was reduced to 54.15 kJ·mol−1 by adding 4% TiO2 and 2.4% CuO.
|
|
Received: 30 July 2009
|
| Fund: Supported by the Program for New Century Excellent Talents in University No.NCET–07–0786, and the
Science Technology of Zhejiang Province No.2008C21053/2008C21054. |
| 1 SHI Guopu, WANG Zhi, HOU Xianqin, SUN Xiang, ZU Quangao, XU Qiuhong, Low temperature sintered alumina ceramics, Journal of University of Jinan (Sci. & Tech.), 21(1), 17(2007)
(史国普, 王志, 侯宪钦, 孙翔, 俎全高, 徐秋红, 低温烧结氧化铝陶瓷, 济南大学学报, 21(1), 17(2007))
2 SHI Guopu, WANG Zhi, HOU Xianqin, SUN Xiang, Kinetics study on low temperature sintered alumina ceramics, Bulletin of the Chinese Ceramic Society, 26(6), 1112(2007)
(史国普, 王 志, 侯宪钦, 孙 翔, 低温烧结氧化铝陶瓷的动力学研究, 硅酸盐通报, 26(6), 1112(2007))
3 O.H.Kwon, G.L.Messing, Kinetic analysis of solution– precipitation during liquid–phase sintering of alumina, J. Am. Ceram. Soc., 73, 275(1990)
4 V.K.Singh, Densification of alumina and silica in the presence of a liquid–phase, J. Am. Ceram. Soc., 64, 133(1981)
5 N.Akira, L.Gary, Messing. Liquid–phase sintering of alumina coated with magnesium aluminosilicate glass, J. Am. Ceram. Soc., 79(12), 3199(1996)
6 Y.Q.Wu, Y.F.Zhang, X.X.Huang, J.K.Guo, Microstructural development and mechanical properties of self– reinforced alumina with CAS addition, J. Eur. Ceram. Soc., 21(5), 581(2001)
7 N.Akira, L.M.Gary, Liquid–phase sintering of alumina coated with magnesium aluminosilicate glass, J. Am. Ceram. Soc., 8l(5), l163(1998)
8 Z.Misirli, H.Erkalfa, O.T. Ozkan, Effect of B2O3 addition on the sintering of α–Al2O3, Ceramics International,
22(1), 33(1996)
9 E.Hilkat, M.Zulal, B.Tarik, Densification of alumina at l250 with MnO2 and TiO2 additives, Ceram. Int., 21, 345(1995)
10 M.Sathiyakumar, F.D.Gnanam, Influence of MnO and TiO2 additives on density, microstructure and mechanical properties of Al2O3, Ceram. Int., 28, 195(2002)
11 LIU Yuchang, HUANG Xiaowei, Liquid phase sintering of Alumina ceramics and sintering kinetic analysis, Journal of Chinese Ceramic Society, 34(6), 647(2006)
(刘于昌, 黄晓巍, 液相烧结氧化铝陶瓷及其烧结动力学分析, 硅酸盐学报, 34(6), 647(2006))
12 ZHANG Bin, WANG Huanping, MA Hongping, XU Shiqing, LI Denghao, ZHOU Guangmiao, Mechanism of lowering the sintering temperature of Al2O3 ceramic by the addition of CuO–TiO2 (I), Chinese Journal of Materials Research, 23(5), 534(2009)
(张斌, 王焕平, 马红萍, 徐时清, 李登豪, 周广淼, CuO--TiO2复合助剂低温烧结氧化铝陶瓷的机理(I), 材料研究学报, 23(5), 534(2009))
13 W.D.Kingery, Densification during sintering in the presence of a liquid phase, I theory, J. Appl. Phys., 30(3), 301(1959) |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
