Please wait a minute...
材料研究学报  2004, Vol. 18 Issue (1): 60-60    
  论文 本期目录 | 过刊浏览 |
碳纤维表面特性对兼性及厌氧微生物固着的影响
马兆昆;刘杰
北京化工大学材料科学与工程学院
Effect of surface characteristics of carbon fiber on immobilization of facultative and anaerobic aerobes
;
北京化工大学材料科学与工程学院
引用本文:

马兆昆; 刘杰 . 碳纤维表面特性对兼性及厌氧微生物固着的影响[J]. 材料研究学报, 2004, 18(1): 60-60.
, . Effect of surface characteristics of carbon fiber on immobilization of facultative and anaerobic aerobes[J]. Chin J Mater Res, 2004, 18(1): 60-60.

全文: PDF(1526 KB)  
摘要: PAN基碳纤维的表面含氧官能团种类与数量对固着在碳纤维表面的兼性反硝化菌平均生物膜厚度有显著作用,含氧官能团过多或过少都会影响碳纤维表面反硝化菌的固着。通过对碳纤维的处理获得适量的表面含氧官能团与平衡含水率可有效改善碳纤维表面兼性反硝化菌的固着化行为,有助于使碳纤维表面的反硝化生物膜附着量达到最大值。处于同一水平平衡含水率的碳纤维比有机高分子载体对厌氧甲烷菌的固着能力强;同时,随着表面N、O元素含量增加和平衡含水率增高,碳纤维载体对厌氧甲烷菌的固着能力越来越弱。实验表明高温空气氧化的PAN基高强度碳纤维是一种生物相容性好、固着化程度高、再生能力强、耐微生物分解及化学腐蚀的优异反硝化菌新型固着化载体,而未经表面处理的PAN基高强度碳纤维则是厌氧甲烷菌的优异固着化载体。
关键词 无机非金属材料碳纤维表面功能团生物膜    
Abstract:Different oxygenic functional groups and their content on the surface of CF influence distinctly average thickness of immobilized biofilm. Proper content of surface oxygenic functional groups and proper moisture, obtained by modifying the surface of polyacrylonitrile(PAN)-CF, are beneficial to immobinization of by denitrifying microorganism. Anaerobic methane bacteria can immobilize the surface of CF easier compared to the surface of plastics with similar moisture. And with the increase in element content of nitrgen and oxygen on th e surface of CF, its moisture increases and immobilized ability for methane bacteria weakens. The experiment showes that PAN-based high strength CF modified by air of high temperature is a kind of high quality carrier with good biocompatibility, highly immobilized ability and resisting chemical erosion, decomposition of microorganism and strong hydraulic impaction for denitrifying biofilm. PAN-based high strength CF, however, which hasn't be treated, is a high quality carrier for anaerobic methane bacteria.
Key wordsinorganic non-metallic materials    carbon fiber(CF)    surface functional groups    biofilm    immobilization
收稿日期: 2003-09-08     
ZTFLH:  TB321  
1 Shen Yaoliang(沈耀良), Pollution Control Technology (污染防治技术), 8(1) , 12(1995)
2 C.Y.Chen, S.D.Chen, Wat.Sci.Technol., 41(4) , 147(2000)
3 LIU Jie(刘杰), HE Zhenkun(何振坤), WANG Shaotang(王绍堂), ZHAO Xingli(赵兴利), New Carbon Materials(新型碳材料), 6(3) , 10(2002)
4 Akira Kojima(小岛昭), Makoto Satoh(佐藤诚), Journal of The Materials Science Society of Japan(Japanese)(材料科学), 35(6) , 25(1998)
5 Sugio. Otani(大谷杉郎), TANSO (Japanese) (炭素), 194, 276(2000)
6 A.S.R.Pauss, Guiot, Water Environ. Res., 65, 276(1993)
7 R.E.Speece[American](R.E.斯皮思), Translated by Li Yaxin (李亚新译) (Beijing, China Architecture & Building Press, 2001) p.130-175
8 M.Kuroda, M.Yuzawa, Y.Sakakibara, M.Okamura, Water Reseach, 22(5) , 653(1988)
9 HP Bohem, Carbon, 32(5) , 759(1994)
10 LIU Yu(刘雨), ZHAO Qingliang(赵庆良), ZHENG Xingcan(郑兴灿), Treated Technology for Wastewaters by Biofilm (生物膜法污水处理技术) (Beijing, China Architecture & Building Press, 2000) p.14-46
[1] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[2] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[3] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[4] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[5] 李延伟, 罗康, 姚金环. Ni(OH)2 负极材料的十二烷基硫酸钠辅助制备及其储锂性能[J]. 材料研究学报, 2023, 37(6): 453-462.
[6] 余谟鑫, 张书海, 朱博文, 张晨, 王晓婷, 鲍佳敏, 邬翔. N掺杂生物炭的制备及其对Co2+ 的吸附性能[J]. 材料研究学报, 2023, 37(4): 291-300.
[7] 朱明星, 戴中华. SrSc0.5Nb0.5O3 改性BNT基无铅陶瓷的储能特性研究[J]. 材料研究学报, 2023, 37(3): 228-234.
[8] 刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C3N4/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[9] 周毅, 涂强, 米忠华. 制备方法对磷酸盐微晶玻璃结构和性能的影响[J]. 材料研究学报, 2023, 37(10): 739-746.
[10] 谢锋, 郭建峰, 王海涛, 常娜. ZnO/CdS/Ag复合光催化剂的制备及其催化和抗菌性能[J]. 材料研究学报, 2023, 37(1): 10-20.
[11] 戚云超, 方国东, 周振功, 梁军. 不同针刺工艺的针刺复合材料面内拉伸强度分析[J]. 材料研究学报, 2023, 37(1): 21-28.
[12] 余超, 邢广超, 吴郑敏, 董博, 丁军, 邸敬慧, 祝洪喜, 邓承继. 亚微米Al2O3 对重结晶碳化硅的作用机制[J]. 材料研究学报, 2022, 36(9): 679-686.
[13] 张鹏, 黄东, 张福全, 叶崇, 伍孝, 吴晃. 中间相沥青基碳纤维石墨化度对Cf/Al界面损伤的影响[J]. 材料研究学报, 2022, 36(8): 579-590.
[14] 方向明, 任帅, 容萍, 刘烁, 高世勇. 自供能Ag/SnSe纳米管红外探测器的制备和性能研究[J]. 材料研究学报, 2022, 36(8): 591-596.
[15] 李福禄, 韩春淼, 高嘉望, 蒋健, 许卉, 李冰. 氧化石墨烯的变温发光[J]. 材料研究学报, 2022, 36(8): 597-601.