Please wait a minute...
材料研究学报  2009, Vol. 23 Issue (6): 640-645    
  研究论文 本期目录 | 过刊浏览 |
薄膜生长的三维蒙特卡罗模型
朱祎国
大连理工大学工业装备结构分析国家重点实验室 大连理工大学工程力学系 大连 116024
Three dimensional Monte Carlo model of thin film growth
ZHU Yiguo
Supported by the National Basic Research Program under the Grant 2005CB321704.
引用本文:

朱祎国 . 薄膜生长的三维蒙特卡罗模型[J]. 材料研究学报, 2009, 23(6): 640-645.
. Three dimensional Monte Carlo model of thin film growth[J]. Chin J Mater Res, 2009, 23(6): 640-645.

全文: PDF(1887 KB)  
摘要: 

构造三维蒙特卡罗模型, 研究了六边形基底薄膜生长的过程. 在模型中针对每个原子考虑了原子沉积、原子扩散及原子脱附三个动力学过程,
并认为这三个过程是相互独立的, 即在同一计算步长中三个过程依据各自的概率发生. 经过生长过程可视化的结果表明, 薄膜原子之间的相互作用能、基底温度和沉积速率对薄膜的生长方式有显著的影响. 这一结论得到了实验的验证.

关键词 材料科学基础学科 薄膜生长 三维Monte Carlo模型 生长方式 形貌    
Abstract

The morphology of thin film growth has been investigated using 3D Monte Carlo model. Three kinds of dynamic process, i.e. adsorption, diffusion and revaporation are considered independently. Each of the three processes will happen in one Monte Carlo step according to their rate. In the processes of deposition and diffusion, the finial position of atom is the Non-Null position of the next layer. The results show that the thin film growth mode is determined by interaction energy between two atoms of thin film, deposition rate and temperature.

Key wordsfoundational discipline in materials science    thin film growth    3D Monte Carlo model    growth mode    morphology
收稿日期: 2008-11-20     
ZTFLH: 

O484

 
基金资助:

国家重点基础研究发展计划2005CB321704资助项目.

1 WANG Enge, Atomic-scale study of kinetics in film growth (I), Progress in Physics, 23(1), 1(2003)
(王恩哥, 薄膜生长中的表面动力学(I), 物理学进展,  23(1), 1(2003))
2 LIU Zuli, WEI Helin, WANG Hanwen, WANG Junzhen, A random model of thin film growth, Acta Physica Sinica, 48(7), 1302(1999)
(刘祖黎, 魏合林, 王汉文, 王均震, 薄膜生长的随机模型, 物理学报,  48(7), 1302(1999))
3 P.Bruschi, P.Cagnoni, A.Nannini, Temperaturedependent Monte Carlo simulations of thin metal film growth and percolation. Phys. Rev., B55(12), 7955(1997)
4 YANG Ning, CHEN Guanghua, ZHANG Yang, GONG Weibin, ZHU Hesun, Monte Carlo simulation of thin films growth, Acta Physica Sinica, 49(11), 2225(2000)
(杨 宁, 陈光华, 张 阳, 公维宾, 朱鹤孙, 薄膜生长的理论模型与Monte Carlo模拟, 物理学报,  49(11), 2225(2000))
5 ZHANG Peifeng, ZHENG Xiaoping, HE Deyan, Monte Carlo simulation of thin film growth, Since in China, G33(4), 340(2003)
(张佩峰, 郑小平, 贺德衍, 薄膜生长过程的Monte Carlo模拟, 中国科学,  G33(4), 340(2003))
6 LIU Zuli, ZHANG Xuefeng, YAO Kailun, HUANG Yunmi, Monte Carlo simulation of Cu thin film growth by magnetron sputtering, Chinese Journal of Vacuum Science and Technology, 25(2), 83(2005)
(刘祖黎, 张雪锋, 姚凯伦, 黄运米, 溅射沉积Cu膜生长的Monte Carlo模拟, 真空科学与技术学报,  25(2), 83(2005))
7 ZHU Yiguo, Monte Carlo model of thin film growth at initial stage, Journal of Dalian University of Technology, 49(6), 781(2009)
朱祎国, 薄膜生长初期的Monte Carlo模型, 大连理工大学学报,  49(6), 781(2009))
8 ZHANG Qingyu, MA Tengcai, PAN Zhengying, TANG Jiayong, Investigation of Au/Au(100) film growth by kinetic Monte Carlo simulation, Acta Physica Sinica, 49(2), 297(2000)
(张庆瑜, 马腾才, 潘正瑛, 汤家镛 Au/Au(100)外延薄膜生长的计算机模拟及其微观机制研究, 物理学报,  49(2), 297(2000))
9 S.Ozawa, Y.Sasajima, D.W.Heermann, Monte Carlo simulations of film growth, Thin solid films, 272(2), 172(1996)
10 ZHANG Peifeng, ZHENG Xiaoping, HE Deyan, LI Lian, Investigation of surface morphology of thin film growth at initial stage by Kinetic Monte Carlo method, Science in China, 37(1), 9(2007)
(张佩峰, 郑小平, 贺德衍, 李廉, Kinetic Monte Carlo方法对薄膜生长初期表面形貌的研究, 中国科学,  37(1), 9(2007))

[1] 杨栋天, 熊良银, 廖洪彬, 刘实. 基于热力学模拟计算的CLF-1钢改良设计[J]. 材料研究学报, 2023, 37(8): 590-602.
[2] 姜水淼, 明开胜, 郑士建. 晶界偏析以及界面相和纳米晶材料力学性能的调控[J]. 材料研究学报, 2023, 37(5): 321-331.
[3] 邹田春, 巨乐章, 李龙辉, 符记. 铺层方式对CFRP-Al单搭接接头胶接性能的影响[J]. 材料研究学报, 2022, 36(9): 715-720.
[4] 孙艺, 韩同伟, 操淑敏, 骆梦雨. 氟化五边形石墨烯的拉伸性能[J]. 材料研究学报, 2022, 36(2): 147-151.
[5] 杨高元, 向文灏, 刘德政, 屈俊豪, 梁英, 李望南, 徐可, 钟杰, 黄福志, 陈美华, 梁桂杰. 基于水热反应制备SnO2纳米棒阵列[J]. 材料研究学报, 2021, 35(4): 293-301.
[6] 谢明玲, 张广安, 史鑫, 谭稀, 高晓平, 宋玉哲. Ti掺杂MoS2薄膜的抗氧化性和电学性能[J]. 材料研究学报, 2021, 35(1): 59-64.
[7] 刘哲,陈博涵,陈平. 氧气DBD等离子体处理PBO纤维表面及其对双马树脂基复合材料界面性能的影响[J]. 材料研究学报, 2020, 34(2): 109-117.
[8] 岳颗, 刘建荣, 杨锐, 王清江. Ti65合金的初级蠕变和稳态蠕变[J]. 材料研究学报, 2020, 34(2): 151-160.
[9] 鲁效庆,张全德,魏淑贤. A-π-D-π-A型吲哚类染料敏化剂的光电特性[J]. 材料研究学报, 2020, 34(1): 50-56.
[10] 贾彩霞,王乾,任荣,孙福宁. Technora纤维表面等离子体处理对其复合材料界面性能的影响[J]. 材料研究学报, 2019, 33(6): 461-466.
[11] 杨军,张家敏,马文瑾,杜立辉,易健宏,甘国友,游昕,李凤仙. 烧结温度对TC4合金的微观结构和力学性能的影响[J]. 材料研究学报, 2019, 33(5): 338-344.
[12] 李学雄,徐东生,杨锐. 钛合金双态组织高温拉伸行为的晶体塑性有限元研究[J]. 材料研究学报, 2019, 33(4): 241-253.
[13] 江峻,黄诗鑫,王连登,张思彬,朱定一. 冷却速率对Al-20%Si合金Si相形貌及性能的影响[J]. 材料研究学报, 2019, 33(4): 291-298.
[14] 安欢,伍建春,张仲,王欢,孙华,展长勇,邹宇. 电化学刻蚀参数对高阻厚壁宏孔硅阵列表面形貌的影响[J]. 材料研究学报, 2019, 33(3): 177-184.
[15] 赵庆云,程思锐,黄宏. 1240 MPaTi-38644高锁螺栓的拉伸疲劳增寿机理[J]. 材料研究学报, 2019, 33(10): 735-741.