Please wait a minute...
材料研究学报  2009, Vol. 23 Issue (4): 375-379    
  研究论文 本期目录 | 过刊浏览 |
18.8\%MnTRIP/TWIP钢的拉伸应变硬化行为
丁昊1; 丁桦1;2; 唐正友1; 宋丹1; 杨平3
1.东北大学材料与冶金学院 沈阳 110004
2.东北大学轧制技术及连轧自动化国家重点实验室 沈阳 110004
3.北京科技大学材料科学与工程学院 北京 100083
Tensile strain hardening behavior of TRIP/TWIP steel with 18.8% manganese
DING Hao1;   DING Hua1;2;   TANG Zhengyou1;    SONG Dan1;   YANG Ping3
1.School of Materials and Metallurgy; Northeastern University; Shenyang 110004
2.The State Key Lab of Rolling and Automation of Northeastern University; Shenyang 110004
3.School of Materials Science and Engineering; University of Science and Technology Beijing; Beijing 100083
引用本文:

丁昊 丁桦 唐正友 宋丹 杨平. 18.8\%MnTRIP/TWIP钢的拉伸应变硬化行为[J]. 材料研究学报, 2009, 23(4): 375-379.
, . Tensile strain hardening behavior of TRIP/TWIP steel with 18.8% manganese[J]. Chin J Mater Res, 2009, 23(4): 375-379.

全文: PDF(1031 KB)  
摘要: 

对锰含量为18.8%的TRIP/TWIP钢进行单轴拉伸实验, 研究了这种钢的应变硬化行为. 结果表明: 这种高锰TRIP/TWIP钢的真应力应变曲线不完全遵循Hollomon的线性关系, 在不同变形阶段强化机制不同. 在塑性变形的开始阶段TRIP效应比较明显, 且应变硬化指数n是恒定的; 而真应变在0.14--0.35之间时二阶导数d2σ/dε2>0, 应变硬化指数n随着应变量的增加而增加, 其微观机制是形成大量的形变孪晶, 并有孪晶和位错的交互作用, TWIP效应在该阶段占主导作用. 真应变大于0.35后有少量TRIP效应, 此时两相均发生变形.

关键词 金属材料高锰钢TRIP/TWIP效应应变硬化力学性能    
Abstract

The tensile tests were carried out to study the strain hardening behavior of a high manganese TRIP/TWIP steels with 18.8% manganese. The results indicated that, strain hardening behaviors are different during the deformation process. True stress-strain curve obeys Hollomon relationship partly. TRIP effect occurs in the initial plastic stage, and the strain hardening exponent in this stage is a constant. However, the value of n increases with true strain ε increasing, when true strain is between 0.14 and 0.35. Then the value of d2σ/dε2 is above zero. A lot of deformation twinning can be found, and the micro mechanisms are twins induced plasticity. TWIP effect dominates this stage. The mechanism of the last stage is some TRIP effect, and both phases have occurred plastic deformation.

Key wordsmetallic materials    high manganese steel    TRIP/TWIP effect    strain hardening    mechanical properties
收稿日期: 2008-12-23     
ZTFLH: 

TG142

 
基金资助:

国家自然科学基金50771019资助项目.

1 DING Hua, TANG Zhengyou, LIWei, WANG Mei, SONG Dan, Microstructures and mechanical properties of Fe-Mn-(Al, Si) TRIP/TWIP steels, Journal of Iron and Steel Research, 13(6), 66(2006)
2 A.S.Hamada, L.P.Karjalainen, M.C.Somani, The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels, Materials Science and Engineering A, 467, 114(2007)
3 V.Tsakiris, D.V.Edmonds, Martensite and deformation twinning in austenitic steels, Materials Science and Engineering A, 273-275, 430(1999)
4 S.Allain, J.P.Chateau, O.Bouaziz, A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel, Materials Science and Engineering A, 387-389, 143(2004)
5 B.X.Huang, X.D.Wang, Y.H.Rong, L.Wang, L.Jin, Mechanical behavior and martensitic transformation of an Fe–Mn–Si–Al–Nb alloy, Materials Science and Engineering A, 438-440, 306(2006)
6 O.Grassel, L.Kruger, G.Frommeyer, L.W.Meyer, High strength Fe-Mn-(Al, Si) TRIP/TWIP steels developmentproperties-application, International Journal of Plasticity, 16, 1391(2000)
7 ZHANG Zengzhi, Austenitic Manganese Steel (Beijing, The Press of Metallurgical Industry, 2002) p.54
(张增志, 耐磨高锰钢  (北京, 冶金工业出版社, 2002) p.54)
8 ZHANG Yizeng, LOU Yanliang, LI Guoan, ZOU Hongcheng, Staged strain hardening curve of dualphase
Mo-containing steel, Iron and Steel, 20(9), 32(1985)
(张以增, 娄彦良, 李国安, 邹鸿承, 含Mo双相钢应变硬化曲线的阶段性, 钢铁,  20(9), 32(1985))
9 XIONG Ronggang, FU Renyu, LI Qian, ZHANG Mei, LI Lin, Tensile strain hardening behaviour of TWIP steels, Iron and Steel, 42(11), 61(2007)
(熊荣刚, 符仁钰, 黎倩, 张梅, 李麟, TWIP钢的拉伸应变硬化行为, 钢铁, 42(11), 61(2007))
10 G.Frommeyer, U.Brux, P.Neumann, Supra-ductile and high-strength manganese- TRIP/TWIP steels for high energy absorption purposes, ISIJ International, 43(3), 438(2003)
11 C.C.Hyoung, K.H.Tae, C.S.Hong, W.C.Yong, The formation kinetics of deformation twin and deformation induced ε-martensite in an austenitic Fe-C-Mn steel, Scripta Materialia, 40(10), 1171(1999)
12 I.Karaman, H.Sehitoglu, K.Gall, Y.I.Chumlyakov, Deformation of single crystal Hadfield steel by twinning and slip, Acta mater, 48(6), 1345(2000)
13 Kazunori Sato, Michiyuki Ichinose, Yoshihiko Hirotsu, Yasunobu Inoue, Effects of deformation induced phase transformation and twinning on the mechanical properties of austenitic Fe-Mn-Al alloys, ISIJ International, 29(10), 868(1989)
14 LI Shutang, Metal X-ray diffraction and electronic micro analyze technology (Beijing, The Press of Metallurgical Industry, 1980) p.168
(李树棠,  金属X射线衍射与电子显微分析技术 (北京, 冶金工业出版社, 1980) p.168)
15 D.C.Ludwigson, Modified stress-strain relation for fcc metals and alloys, Metallurgical Transactions, 2, 2825(1971)
16 O.Bouaziz, S.Allain, C.Scott, Effect of grain and twin boundaries on the hardening mechanisms of twinninginduced plasticity steels, Scripta Materialia, 58(6), 484(2008)
17 H.Fujita, T.Katayama, In-situ observation of straininduced  γ → ε → α' and γ → α' martensitic transformations
in Fe-Cr-Ni alloys, Materials Transactions, JIM, 33(3), 243(1992)

[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[3] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[4] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[5] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[6] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[7] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[8] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[9] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[10] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[11] 陈晶晶, 占慧敏, 吴昊, 朱乔粼, 周丹, 李柯. 纳米晶CoNiCrFeMn高熵合金的拉伸力学性能[J]. 材料研究学报, 2023, 37(8): 614-624.
[12] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[13] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[14] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[15] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.