Please wait a minute...
材料研究学报  2009, Vol. 23 Issue (3): 323-326    
  研究论文 本期目录 | 过刊浏览 |
316L不锈钢和NiTi合金微磁场表面粗糙度对血液相容性的影响
刘强;  程晓农;  徐红星;  费黄霞
江苏大学材料科学与工程学院 镇江 212013
Effect of micromagnetic field surface roughness of 316L stainless steel and NiTi alloy on blood compatibility
LIU Qiang;  CHENG Xiaonong;  XU Hongxing;  FEI Huangxia
School of Materials Science and Engineering; Jiangsu University; Zhenjiang 212013
引用本文:

刘强 程晓农 徐红星 费黄霞. 316L不锈钢和NiTi合金微磁场表面粗糙度对血液相容性的影响[J]. 材料研究学报, 2009, 23(3): 323-326.
, . Effect of micromagnetic field surface roughness of 316L stainless steel and NiTi alloy on blood compatibility[J]. Chin J Mater Res, 2009, 23(3): 323-326.

全文: PDF(796 KB)  
摘要: 

在316L不锈钢、NiTi合金的含SrFe12O19磁性粉末的TiO2薄膜表面用溶胶--凝胶法再涂覆不同层数的TiO2薄膜, 以降低材料微磁场表面的微粗糙度, 并用扫描电镜、粗糙度仪分析薄膜的表面粗糙度. 测试了不同粗糙度的微磁场表面的动态凝血时间和溶血率, 研究了微磁场表面的粗糙度对材料血液相容性的影响. 结果表明, 粗糙度小的微磁场表面的血液相容性比粗糙度大的微磁场表面的血液相容性好. 即对于平整光滑的微磁场表面, 可以利用微磁场提高材料血液相容性的同时, 进一步改善材料的血液相容性.

关键词 金属材料表面粗糙度微磁场血液相容性溶胶--凝胶法TiO2薄膜    
Abstract

To reducing surface roughness, TiO2 film with different lay numbers was coated on the TiO2 film containing SrFe12O19 powder on the surface of NiTi alloy and 316L stainless steel with sol-gel method. The surface roughness of these films were investigated by SEM and surface roughometer, and the dynamic clotting time and hemolysis rate of these different roughness micromagnetic field surfaces were tested. The results showed that the blood compatibility on the micromagnetic field surface with low roughness is better, that is, smoother micromagnetic field surface can be used to further improve the blood compatibility of the materials.

Key wordsmetallic materials    surface roughness    micromagnetic field    blood compatibility    sol-gel    TiO2 film
收稿日期: 2008-10-10     
ZTFLH: 

R318

 
基金资助:

江苏省高校自然科学研究计划项目04KJB430025资助.

1 B.D.Ratner, The catastrophe revisited:Blood compatibility in the 21st century, Biomaterials, 28, 5144(2007)
2 YUYaoting,Bio-medical Materials (Tianjin, Tianjin University Press, 2000) p.20
(俞耀庭,   生物医用材料  (天津, 天津大学出版社, 2000) p.20)
3 D.A.Armitage, T.L.Parker, D.M.Grant, Biocompatibility and hemocompatibility of surface-modified NiTi alloys, Biomed. Mater. Res., A, 66(1), 129(2003)
4 M.Ha¨?dopoulos, S.Turgeon, C.Sarra-Bournet, Development of an optimized electrochemical process for subsequent coating of 316 stainless steel for stent applications, J. Mater. Sci.: Mater. Med., 17(7), 647(2006)
5 R.W.Poon, K.W.Yeung, X.Y.Liu, Carbon plasma immersion ion implantation of nickel-titanium shape memory alloys, Biomaterials, 26(15), 2265(2005)
6 LIU Qiang, ChENG Xiaonong, XU Hongxing, FEI Huangxia, XU Wenrong, Blood compatibility of 316L stainless steel and NiTi alloy vascular stent, Journal of Clinical Rehabilitative Tissue Engineering Research, 12(4), 735(2008)
(刘强, 程晓农, 徐红星, 费黄霞, 许文荣, 316L不锈钢和NiTi合金血管支架的血液相容性, 中国组织工程研究与临床康复,  12(4), 735(2008))
7 FEI Huangxia, LIU Qiang, ChENG Xiaonong, YANG Juan, XU Hongxing, Preparation of TiO2 film containing magnetic power on biomedical metallic substrate and study on its blood compatibility, Journal of Functional Materials and Devices, 13(3), 202(2007)
(费黄霞, 刘强, 程晓农, 杨娟, 徐红星, 医用金属材料表面含磁粉的TiO2薄膜的制备及其血液相容性, 功能材料与器件学报, 13(3), 202(2007))
8 A.M.Vilas, M.G.Donoso, Looking at the microtopography of polished and blasted Ti-based biomaterials using atomic force microscopy and contat angle goniometry, Colloids and Surfaces B:Biointerfaces, 52, 157(2006)
9 GENG Fang, ShI Ping, ChENG F.T, TiO2 film preparation and hemocompatibility of NiTi shape memory alloy, The Chinese Journal of Nonferrous Metals, 14(9), 1575(2004)
(耿芳, 石萍, F.T.Cheng, NiTi形状记忆合金表面TiO2薄膜的制备及其血液相容性, 中国有色金属学报,   14(9), 1575(2004))
10 LIU Jingxiao, YANG Dazhi, ShI Fei, CAI Yingji, CHEN Jihua, Preparation of TiO2 film on metallic substrates by sol-gel method and study on its hemocompatibility, Chinese Journal of Biomedical Engineering, 21(5), 398(2002)
(刘敬肖, 杨大智, 史非, 蔡英骥, 陈吉华, 金属表面TiO2薄膜的溶胶-凝胶法制备及其血液相容性研究, 中国生物医学工程学报,  21(5), 398(2002)) 11 LIU Qiang, CHENG Xiaonong, FEI Huangxia, YANG Juan, XU Hongxing, Study on effect of micromagnetic field of substrate biomedical metallic materials on blood compatibility, Chinese Journal of Biomedical Engineering, 27(3), 462(2008)
(刘强, 程晓农, 费黄霞, 杨 娟, 徐红星, 金属生物材料表面微磁场对血液相容性影响的研究, 中国生物医学工程学报, 27(3), 462(2008))

[1] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] 刘天福, 张滨, 张均锋, 徐强, 宋竹满, 张广平. 缺口应力集中系数对TC4 ELI合金低周疲劳性能的影响[J]. 材料研究学报, 2023, 37(7): 511-522.