|
|
|
| 喷射成形M4高速钢的高温热变形及组织演变* |
| 王和斌 张金祥 卢林 侯陇刚 崔华 黄进峰 张济山 |
| (北京科技大学新金属材料国家重点实验室 北京 100083) |
|
| High-temperature Thermal Deformation and Microstructure Evolution of Spray Formed M4 High Speed Steel |
WANG Hebin ZHANG Jinxiang LU Lin HOU Longgang CUI Hua
HUANG Jinfeng ZHANG Jishan** |
(State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing,
Beijing 100083) |
引用本文:
王和斌 张金祥 卢林 侯陇刚 崔华 黄进峰 张济山. 喷射成形M4高速钢的高温热变形及组织演变*[J]. 材料研究学报, 2013, 27(2): 167-172.
.
High-temperature Thermal Deformation and Microstructure Evolution of Spray Formed M4 High Speed Steel[J]. Chinese Journal of Materials Research, 2013, 27(2): 167-172.
1 D. N. Hanlon, W.M. Rainforth, C.M. Sellars, R. Price, H.T. Gisborne, J. Forrest, The structure and properties of spray formed cold rolling mill work roll steels, Journal of Materials Science, 33, 3233(1998)
2 A. R. E. Singer, The challenge of spray forming, Powder Metallurgy, 25(4), 195(1982)
3 I. C. Ernst, D. Duh, ESP4 and TSP4, A comparison of spray formed with powder metallurgically produced cobalt free high-speed steel of type 6W-5Mo-4V-4Cr, Journal of Materials science, 39, 6831(2004)
4 R. A. Mesquita, C. A. Barbosa, High speed steel produced by conventional casting, spray forming and powder metallurgy, Materials Science Forum, 498, 244(2005)
5 P. Hellman, High speed steels by powder metallurgy, Scandinavian Journal of Metallurgy, 27, 44(1998)
6 A. R. E. Singer, Metal matrix composites made by spray forming, Materials Science and Engineering A, 135, 13(1991)
7 P. S. Grant, Spray forming, Progress in Materials Science, 39, 497(1995)
8 Rafael Agnelli, Mesquita, Celso Antonio Barbosa, Spray forming high speed steel-properties and processing, Materials Science and Engineering A, 383, (87)2004
9 J. Forrest, R. Price, D. Hanlon, Manufacturing clad products by spray forming, International Journal of Powder Metallurgy, 33(3), 21(1997)
10 A. Schulz, V. Uhlenwinkel, C. Escher, R. Kohlmann, A. Kulmburg, M.C. Montero, R. Rabitsch, W. Schützenh?fer, D. Stocchi, D. Viale, Opportunities and challenges of spray forming high-alloyed steels, Materials Science and Engineering A, 477, 69(2008)
11 P. S. Grant, Solidification in spray forming, Metallurgical and Materials Transactions A, 38A, 1520(2007)
12 X. Liang, J. C. Earthman, E. J. Lavernia, On the mechanism of grain formation during spray atomization and deposition, Acta Metallurgica et Materialia, 40(11), 3003(1992)
13 N. J. Grant, Rapid solidification of metallic particulates, Jounal of Metals, 35(1), 20(1983)
14 R. H. Barkalow, R. W. Kraft, J. I. Goldstein, Solidification of M2 high speed steel, Metallurgical and Materials Transactions B, 3(4), 919(1972)
15 F. Yan, H. S. Shi, B. Z. Jin, J. F. Fan, Z. Xu, Microstructure evolution during hot rolling and heat treatment of the spray formed Vanadis 4 cold work steel, Materials Characterization, 59(8), 1007(2008)
16 H. Fredriksson, M. Hillert, M. Nica, The Decomposition of the M2C Carbide in High speed Steel, Scandinavian Journal of Metallurgy, 8(3), 115(1979)
17 E. S. Lee, W. J. Park, J. Y Jung, S. Ahn, Solidification microstructure and M2C carbide decomposition in a spray- formed high-speed steel, Metallurgical and Materials Transactions A, 29(5), 1395(1998)
18 Huang Changqing, DIAO Jinpeng, DENG Hua, Constitutive model for hot deformation of aluminum alloy, Journal of Central South University (Science and Technology), 42(12), 3702(2011)
(黄长清, 刁金鹏, 邓 华, 铝合金热变形的本构模型研究, 中南大学学报(自然科学版), 42(12), 3702(2011))
19 C. Zener, J. H. Hollomon, Effect of strain rate upon plastic flow of steel, Journal of Applied Physics, 15, 22(1944)
20 C. Imbert, N. D. Ryan, H. J. Mcqueen, Hot workability of three grades of tool steel, Metallurgical and Materials Transactions A, 15(10), 1855(1984)
21 C. Rodenburg, M. Krzyzanowski, J. H. Beynon, W. M. Rainforth, Hot workability of spray-formed AISI M3:2 high-speed steel, Materials Science and Engineering A, 386, 420(2004) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
