|
|
|
| 超快速退火对Nb+Ti--IF钢组织和织构的影响 |
| 侯自勇, 许云波, 吴迪 |
| 东北大学轧制技术及连轧自动化国家重点实验室 沈阳 110819 |
|
| Microstructure and Texture of Nb+Ti–IF Steels After Ultra–short Annealing |
| HOU Ziyong, XU Yunbo, WU Di |
| The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 |
引用本文:
侯自勇 许云波 吴迪. 超快速退火对Nb+Ti--IF钢组织和织构的影响[J]. 材料研究学报, 2012, 26(1): 13-20.
,
,
.
Microstructure and Texture of Nb+Ti–IF Steels After Ultra–short Annealing[J]. Chin J Mater Res, 2012, 26(1): 13-20.
| 1 K.M.Tiitto, C.Jung, P.Wray, C.I.Garcia, A.J.Deardo, Evolution of texture in ferritically hot rolled Ti and Ti+Nb alloyed ULC steels during cold rolling and annealing, ISIJ International, 44(2), 404(2004)2 P.Ghosh, B.Bhattachary, R.K.Ray, Comparative study of precipitation behavior and texture formation in cold rolled–batch annealed and cold rolled–continuous annealed interstitial free high strength steels, Scripta Materialia, 56(8), 657(2007)3 K.Verbeken, L.Kestens, J.J.Jonas, Microtextural study of orientation change during nucleation and growth in a cold rolled ULC steel, Scripta Materialia, 48(10), 1457(2003)4 R.D.Doherty, D.A.Hughes, F.J.Humphreys, J.J.Jonas, D.Juul Jensen, M.E.Kassner, W.E.King, T.R.McNelley, H.J.McQueen, A.D.Rollett, Current issues in recrystallization: a review, Materials Science and Engineering A, 238(2), 219(1997)5 M.Atkinson, Ultra–rapid annealing of low–carbon steel, Materials Forum, 17(2), 181(1993) 6 S.L.Semiatin, I.M.Sukonnik, V.Seetharaman, An analysis of static recrystallization during continuous, rapid heat treatment, Metallurgical and Materials Transactions A, 27(7), 2051(1996)7 M.M.Attallah, M.Strangwood, C.L.Davis, Influence of the heating rate on the initiation of primary recrystallization in a deformed Al–Mg alloy, Scripta Materialia, 63(4), 371(2010)8 V.Massardier, A.Ngansop, D.Fabr`egue, J.Merlin, Microstructure and mechanical properties of low carbon Al–killed steels after ultra–rapid annealing cycles, Materials Science Forum, 638–642, 3368(2010)9 V.Massardier, A.Ngansop, D.Fabr`egue, J.Merlin, Identification of the parameters controlling the grain refinement of ultra–rapidly annealed low carbon Al–killed steels, Materials Science and Engineering A, 527(21–22), 5654(2010)10 M.Ferry, D.Jones, High–rate annealing of single–phase and particle containing aluminum alloys, Scripta Materialia, 38(2), 177(1997)11 D.Muljono, M.Ferry, D.P.Dunne, Influence of heating rate on anisothermal recrystallization in low and ultra–low carbon steels, Materials Science and Engineering A, 303(1–2), 90(2001)12 A.C.C.Reis, L.Bracke, R.Petrov, W.J.Kaluba, L.Kestens, Grain refinement and texture change in interstitial free steels after severe rolling and ultra–short annealing, ISIJ International, 43(8), 1260(2003)13 J.Stockemer, P.Vanden Brande, Recrystallization of a cold–rolled low–carbon steel by cold–plasma–discharge rapid annealing, Metallurgical and Materials Transactions A, 34(6), 1341(2003)14 S.S.Hazra, A.A.Gazder, E.V.Pereloma, Stored energy of a severely deformed interstitial free steel, Materials Science and Engineering A, 524(1–2), 158(2009)15 J.Stockemer, P.Vanden Brande, Proceeding of 1st Joint International Conference, Recrystallization and Grain Growth, edited by G.Gottstein and D.A.Molodov (Aachen, Springer–Verlag, 2001) p.113116 I.Samajdar, B.Verlinden, P.Van Houtte, D.Vanderschueren, Recrystallisation kinetics in IF–steel: a study on the sluggish recrystallisation behavior, Scripta Materialia, 37(6), 869(1997)17 W.B.Hutchinson, Development and control of annealing textures in low–carbon steels, International Metals Reviews, 29(1), 25(1984)18 M.H¨oscher, D. Raabe, K.L¨ucke, Rolling and recrystallization textures of bcc steels, Materials Technology, 62(12), 567(1991)19 YANG Juexian, Physical Foundation of Metals Plastic Deformation, (Beijing, Metallurgical Industry Press, 1988) p.182(杨觉先, 金属塑性变形物理基础 (北京, 机械工业出版社, 1988) p.182)20 M.Atkinson, Bifurcation of thermal restoration processes in deformed iron and steel, Materials Science and Engineering A, 262(1–2), 33(1999)21 J.R.Klepaczko, C.Y.Chiem, Rate sensitivity of fcc metals instantaneous rate sensitivity and rate sensitivity of strain hardening, Journal of the Mechanics and Physics of Solids, 34(1), 29(1986)22 T.Takeuchi, Theory of high–temperature type work–hardening of body–centred cubic metals, Journal of the Physical Society of Japan, 28(4), 955(1970)23 K.Mukunthan, E.B.Hawbolt, Modeling recovery and recrystallization kinetics in cold–rolled Ti–Nb stabilized interstitial–free steel, Metallurgical and Materials Transactions A, 27(11), 3410(1996)24 M.Z.Quadir, B.J.Duggan, Deformation banding and recrystallization of a fibre components in heavily rolled IF steel, Acta Materialia, 52(13), 4011(2004)25 V.J.Mart´?nez, J.I.Verdeja, J.A.Pero–Sanz, Interstitial free steel influence of a–phase hot–rolling and cold–rolling reduction to obtain extra–deep drawing quality, Materials Characterization, 46(1), 45(2001)26 K.Verbeken, L.Kestens, Strain–induced selective growth in an ultra low carbon steel after a small rolling reduction, Acta Materialia, 51(6), 1679(2003)27 R.Saha, R.K.Ray, Texture and grain growth characteristics in a boron added interstitial free steel after severe cold rolling and annealing, Materials Science and Engineering A, 527(7–8), 1882(2010) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
