Please wait a minute...
材料研究学报  2005, Vol. 19 Issue (6): 577-580    
  论文 本期目录 | 过刊浏览 |
热处理条件对锻造ZK60-Y镁合金力学性能的影响
许道奎;彭林;刘路;徐永波
中国科学院金属研究所沈阳材料科学国家(联合)实验室; 沈阳110016
引用本文:

许道奎; 彭林; 刘路; 徐永波 . 热处理条件对锻造ZK60-Y镁合金力学性能的影响[J]. 材料研究学报, 2005, 19(6): 577-580.

全文: PDF(3284 KB)  
摘要: 研究了不同热处理条件下锻造ZK60-Y镁合金微观组织的变化对其力学性能的影响. 结果表明, 直接进行人工时效的合金具有优越的强度和塑性. XRD分析表明, 析出相主要有Mg2Zn3、Mg24Y5、Zn2Zr3和w-Mg3Y2Zn3. Mg2Zn3和w-Mg3Y2Zn3等析出相的尺寸、数量及其在基体中的分布状态对合金的力学性能影响很大. 锻造态下大块破碎呈带状分布的Mg3Y2Zn3相及T4 和 T6态下粗化呈片层状的Mg2Zn3相是合金力学性能降低的主要原因. 细小呈带状分布的Mg3Y2Zn3相和细层片状分布的Mg2Zn3相及其在此状态下细小的晶粒使T5态合金具有优越的抗拉强度和塑性.
关键词 金属材料ZK60-Y镁合金微观组织抗拉强度    
Key words
收稿日期: 1900-01-01     
1 GAO Shenbin,Satellite Fabrication Technique(Beijing. Space Navigation Publishing House,1998)p.180 (高慎斌,卫星制造技术(下).(北京,宇航出版社,1998)p.180)
2 MIN Guirong,GUO Shun,Spacecraft Thermal Control (second edition)(Beijing,Science Press,1998)p.58 (闵桂荣,郭舜,航天器热控制(第二版),(北京,科学出版社,1998)p.58)
3 M.M.Finckenor,R.R.Kamenetzky,J.A.Vaughn,Further investigation of the passive optical sample assembly (POSA)-I flight experiment,AIAA 0098(2001)
4 A.C.Tribble,R.Lukins,E.Watts,Low earth orbit thermal control coatings exposure flight tests:a comparison of U.S. and Russian result,NASA-CP 4647,95 22919(1995)
5 A.Houdayer,G.Cerny,J.E.Klemberg-Sapieha, G.Czeremuszkin,M.R.Wertheimer,MeV proton ir- radiations and atomic oxygen exposure of spacecraft materials with SiO_2 protective coatings,Nucl.Instr.and Meth.B,131,335(1997)
6 H.D.Hendricks,W.E.Miller,A study to determine the presence of voltage breakdown due to proton irradiation in polymeric materials,NASA TM X-1688(1996)
7 C.D.Li,D.Z.Yang,S.Y.He,Effects of proton exposure on aluminized Teflon FEP film degradation,Nucl.Instr.and Meth.B,234,249(2005)
8 D.J.T.Hill,F.A.Rasoul,J.S.Forsythe,Effect of simulated LEO radiation on polyimides(UV degradation study), Journal of Applied Polymer Science,58,1847(1995)
9 DI Mingwei,JIN Xiaoou,HE Shiyu,LI Ruiqi,YANG Dezhuang.Damage and mechanism of methyl silicone rub- ber reinforced with silicone resin under proton irradiation, Acta Polymerica Sinica,(5),717(2006) (邸明伟,金晓鸥,何世禹,李瑞琦,杨德庄,质子辐照对有机硅树脂增强甲基硅橡胶的性能损伤及机理,高分子学报,(5),717(2006))
10 L.X.Jiang,S.Y.He,D.Z.Yang,A study on resistance to VUV irradiation of nano-TiO_2 modified carbon/epoxy composites,J.Mater.Res.,18(3),654(2003)
11 J.M.Costantini,J.P.Salvetat,F.Brisard,M.P.Cals, J.P.Marque,F.Issac,Space charge formation and relax- ation in ion bombarded poly(imide)Kapton films,Nucl. Instr.and Meth.B,116,496(1996)
12 Space Science & Application Center,Chinese Academy of Science,Aerospace Environment Manua(Beijing,Chinese Science and Technology Press,2001)p.1 (中国科学院空间科学与应用研究中心,宇航空间环境手册,(北京,中国科学技术出版社,2001)p.1)
13 X.D.Wang,S.Y.He,D.Z.Yang,Low-energy electron expo- sure effects on the optical properties of ZnO/K_2SiO_3 ther- mal control coating,J.Mater.Res.,17(7),1766(2002)
14 C.D.Li,D.Z.Yang,S.Y.He,S.Q.Yang,Degradation of Teflon film under radiation of protons and electrons,Jour- nal of Spacecraft and Rockets,41(3),73(2004)
15 LI Chundong,YANG Dezhuang,HE Shiyu,Study of syn- ergistic relation effects of protons and electrons on alu- minized Teflon FEP film degradation,Chinese J.Mater. Res.,17(4),421(2003) (李春东,杨德庄,何世禹,质子、电子综合辐照作用下Teflon FEP/Al辐照损伤效应研究,材料研究学报,17(4),421(2003))
16 LI Chundong,YANG Dezhuang,HE Shiyu,M.M. Mikhailov.Effects of electron irradiation energy on op- tical properties of Kapton/Al thermal control coatings, High Power Laser and ParticaI Beams,15(8),741(2003) (李春东,杨德庄,何世禹,Mikhailov M.M.,电子辐照能量对Kapton/Al热控涂层光学性能的影响,强激光与粒子束,15(8),741(2003))
17 C.D.Li,D.Z.Yang,S.Y.He,Effect of electron exposure on optical properties of aluminized polyimide film,J.Mater. Res.,17(9),2442(2002)
18 M.M.Mikhailov,Prediction of Degradation in Optical Properties of Thermal Control Coatings on Spacecrafts (New Siberia,Science Press,1999)p.55
[1] 毛建军, 富童, 潘虎成, 滕常青, 张伟, 谢东升, 吴璐. AlNbMoZrB系难熔高熵合金的Kr离子辐照损伤行为[J]. 材料研究学报, 2023, 37(9): 641-648.
[2] 宋莉芳, 闫佳豪, 张佃康, 薛程, 夏慧芸, 牛艳辉. 碱金属掺杂MIL125CO2 吸附性能[J]. 材料研究学报, 2023, 37(9): 649-654.
[3] 赵政翔, 廖露海, 徐芳泓, 张威, 李静媛. 超级奥氏体不锈钢24Cr-22Ni-7Mo-0.4N的热变形行为及其组织演变[J]. 材料研究学报, 2023, 37(9): 655-667.
[4] 邵鸿媚, 崔勇, 徐文迪, 张伟, 申晓毅, 翟玉春. 空心球形AlOOH的无模板水热制备和吸附性能[J]. 材料研究学报, 2023, 37(9): 675-684.
[5] 幸定琴, 涂坚, 罗森, 周志明. C含量对VCoNi中熵合金微观组织和性能的影响[J]. 材料研究学报, 2023, 37(9): 685-696.
[6] 欧阳康昕, 周达, 杨宇帆, 张磊. LPSOMg-Y-Er-Ni合金的组织和拉伸性能[J]. 材料研究学报, 2023, 37(9): 697-705.
[7] 徐利君, 郑策, 冯小辉, 黄秋燕, 李应举, 杨院生. 定向再结晶对热轧态Cu71Al18Mn11合金的组织和超弹性性能的影响[J]. 材料研究学报, 2023, 37(8): 571-580.
[8] 熊诗琪, 刘恩泽, 谭政, 宁礼奎, 佟健, 郑志, 李海英. 固溶处理对一种低偏析高温合金组织的影响[J]. 材料研究学报, 2023, 37(8): 603-613.
[9] 刘继浩, 迟宏宵, 武会宾, 马党参, 周健, 徐辉霞. 喷射成形M3高速钢热处理过程中组织的演变和硬度偏低问题[J]. 材料研究学报, 2023, 37(8): 625-632.
[10] 由宝栋, 朱明伟, 杨鹏举, 何杰. 合金相分离制备多孔金属材料的研究进展[J]. 材料研究学报, 2023, 37(8): 561-570.
[11] 任富彦, 欧阳二明. g-C3N4 改性Bi2O3 对盐酸四环素的光催化降解[J]. 材料研究学报, 2023, 37(8): 633-640.
[12] 王昊, 崔君军, 赵明久. 镍基高温合金GH3536带箔材的再结晶与晶粒长大行为[J]. 材料研究学报, 2023, 37(7): 535-542.
[13] 刘明珠, 樊娆, 张萧宇, 马泽元, 梁城洋, 曹颖, 耿仕通, 李玲. SnO2 作散射层的光阳极膜厚对量子点染料敏化太阳能电池光电性能的影响[J]. 材料研究学报, 2023, 37(7): 554-560.
[14] 秦鹤勇, 李振团, 赵光普, 张文云, 张晓敏. 固溶温度对GH4742合金力学性能及γ' 相的影响[J]. 材料研究学报, 2023, 37(7): 502-510.
[15] 刘天福, 张滨, 张均锋, 徐强, 宋竹满, 张广平. 缺口应力集中系数对TC4 ELI合金低周疲劳性能的影响[J]. 材料研究学报, 2023, 37(7): 511-522.