|
|
|
| 复合工艺对半固态A356铝合金浆料组织的影响 |
| 汤国兴; 毛卫民; 刘永峰 |
| 北京科技大学材料科学与工程学院 |
|
引用本文:
汤国兴; 毛卫民; 刘永峰 . 复合工艺对半固态A356铝合金浆料组织的影响[J]. 材料研究学报, 2008, 22(2): 167-170.
1 M.C.Flemings,Behavior of metal alloys in the semi-solid state,Metall.Trans.,22A(5),957(1991)
2 D.B.Spencer,R.Mehrabian,M.C.Flemings,Rheological behavior of Sn-15pct Pb in the crystallization range,Met- all.Trans.,3(7),1925(1972)
3 M.G.Flemings,R.Mehrabian,D.B.Spencer,Composition and methods for preparing liquid-solid alloys for cast- ing methods employing the liquid-solid alloys,US Patent, 3948650(1976)
4 V.I.Dobatkin,G.I.Eskin,Ingots of aluminum alloys with nondendritic structure produced by ultrasonic treatment for deformation in the semi-solid state,in Proceeding of the 4th International Conference on the Processing of Semi-Solid Alloys and Composite,edited by D.H.Kirk- wood and P.Kapranos (England,University of Sheffield, 1996) p.193
5 D.H.Kirkwood,P.Kapranos,Semi-solid processing of al- loy,Metals and Materials,130-131,594(2002)
6 T.Haga,P.Kapranos,Simple rheocasting processes,Jour- nal of Materials Processing Technology,5(1),16(1989)
7 J.A.Yurko,R.A.Martinez,M.C.Flemings,Commercial de- velopment of the semi-solid rheocasting(SSR~(TM)) process, Metallurgical Science and Technology,21(1),10(2003)
8 M.Findon,D.Apelian,Continuous rheoconversion process for semi-solid slurry production,Transaction of the Amer- ican Foundrymen's Society,112,305(2004)
9 MAO Weimin,ZHAO Aimin,CUI Chenglin,Method and equipment for preparation of semi-solid metals slurry or continuous casting billet with spherical primary grains, China Patent,00109540.4(2000) (毛卫民，赵爱民，崔成林，球状初晶半固态金属浆料或连铸坯料的制备方法及装置，中国专利，00109540．4(2000))
10 LIU Guojun,ZHANG Kui,ZHANG Yongzhong,FAN Jianzhong,XU Jun,SHI Likal,Continuous production and research of semisolid AlSi7Mg alloy,Acta Metallur- gica Sinica,35(2),141(1999) (刘国钧，张奎，张永忠，樊建中，徐骏，石力开，半固态AlSi7Mg铝合金的连续制备实验与研究，金属学报，35(2)，141(1999))
11 MAO Weimin,ZHAO Aimin,CUI Chenglin,SUN Feng, ZHENG Chengli,ZHONG Xueyou,Research on the continuous cast billets of semi-solid AlSi7Mg alloy and their microstructure formation,Acta Metallurgica Sinica, 36(5),539(2000) (毛卫民，赵爱民，崔成林，孙峰，郑承利，钟雪友，AlSi7Mg合金半固态连铸坯料和组织形成研究，金属学报，36(5)，539(2000))
12 LIU Zheng,MAO Weimin,ZHAO Zhengduo,Prepara- tion of semi-solid slurry of aluminum alloys by a new technology,Chinese Journal of Materials Research,20(2), 125(2006) (刘政，毛卫民，赵振铎，用新工艺制备半固态铝合金浆料，材料研究学报，20(2)，125(2006))
13 A.Ohno,The Solidification of Metals,(Tokyo,Chijin Shokan,1976) p.72
14 G.Tausig,K.Xia,Rheocasting and semi-solid forming of a usually wrought aluminum alloy,in Proceeding of the 4th International Conference on the Processing of Semi-Solid Alloys and Composite,edited by D.H.Kirkwood and P. Kapranos (England,University of Sheffield,1996) p.290
15 WANG Ping,LU Guimin,CUI Jianzhong,Microstructure of nearby liquidus semi-continuous casting aluminum al- loy A356,Acta Metallurgica Sinica,38(4),389(2002) (王平，路贵民，崔建忠，近液相线半连续铸造A356铝合金显微组织，金属学报，38(4)，389(2002))
16 MAO Weimin,CUI Chenglin,ZHAO Aimin,YANG Jil- ian,ZHONG Xueyou,Effect of pouring process on the mi- crostructures of semi-solid AlSi7Mg alloy,J.Mater.Sci. tech.,17(6),615(2001)
17 H.Wang,D.H.StJone,C.J.Davidson,Z.Ning,Controlled nucleation method for formation of semisolid feedstock, inProceeding of the 8th International Conference on the Processing of Semi-Solid Alloys and Composite,edited by A.Alexandrou,D.Apelian and G.Georgiou (Limassol, University of Cyprus,2004) p.14
18 E.A.Vieira,B.A.O.Junior,M.Ferrante,Microstructure and rheology of an A356 alloy in the semi-solid state, conditioned by a low pouring temperature technique, inProceeding of the 8th International Conference on the Processing of Semi-Solid Alloys and Composite,edited by A.Alexandrou,D.Apelian and G.Georgiou (Limassol, University of Cyprus,2004) p.11
19 M.C.Flemings,R.A.Martinez,Principles of microstruc- tural formation in semi-solid metal processing.Solid State Phenomena,116,1(2006)
20 S.Blais,W.Loue,C.Pluchon,Structure control by elec- tromagnetic stirring and reheating at semi-solid state, inProceeding of the 4th International Conference on the Processing of Semi-Solid Alloys and Composite,edited by D.H.Kirkwood and P.Kapranos (England,University of Sheffield,1996) p.187
21 M.Garat,S.Blais,C.Pluchon,W.R.Loue,Aluminum semi- solid processing:From the billet to the finished part,in Proceeding of the 5th International Conference on the Processing of Semi-Solid Alloys and Composite,edited by C.Dardano,M.Franciseo and J.Pround (Colorado,Col- orado School of Mines,1998) p.199
22 J.A.Yurko,Semi-solid rheocasting-increasing the capabil- ities of die casting,Die Casting,(1),50(2004) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
