Please wait a minute...
材料研究学报  2013, Vol. 27 Issue (5): 556-560    
  研究论文 本期目录 | 过刊浏览 |
湿热环境对复合材料正交板静拉伸性能的影响
王 德1 金 平2 谭晓明2 杨 凯3
1. 海军航空工程学院 研究生管理大队 烟台 264001
2. 海军航空工程学院 青岛校区 青岛 266041
3. 海军91467部队 青岛 266311
Static Tensile Performances of Composite Laminates in Hygrothermal Environment
WANG De1* JIN Ping2 TAN Xiaoming2 YANG Kai3
1. Graduate Students Brigade of Naval Aeronautical Engineering Institute, Yantai 264001
2. Qingdao Branch of Naval Aeronautical Engineering Institute, Qingdao 266041
3. The 91467th Unit of PLA, Qingdao 266311
引用本文:

王德, 金平, 谭晓明, 杨凯. 湿热环境对复合材料正交板静拉伸性能的影响[J]. 材料研究学报, 2013, 27(5): 556-560.
WANG De, JIN Ping, TAN Xiaoming, YANG Kai. Static Tensile Performances of Composite Laminates in Hygrothermal Environment[J]. Chinese Journal of Materials Research, 2013, 27(5): 556-560.

全文: PDF(800 KB)  
摘要: 对CCF300/BA9916复合材料正交板进行吸湿-脱湿实验, 测定其在干态、湿态和脱湿条件下的静拉伸性能, 研究了湿热环境下该材料的吸湿和脱湿行为。结果表明: 在70℃水浸条件下CCF300/BA9916复合材料的吸湿过程与脱湿过程均符合Fick第二定律, 试验件约在35 d后达到有效吸湿平衡状态, 有效吸湿平衡率为0.85%; 吸湿导致复合材料试验件的静拉伸性能下降了10.3%, 而脱湿处理可使静拉伸性能得到一定程度的恢复。
关键词 复合材料吸湿-脱湿静拉伸性能有效吸湿平衡    
Abstract:The moisture absorption and desorption behavior of CCF300/BA9916 composite laminates in 70℃ distilled water was investigated. After the moisture absorption and desorption experiments, the static tensile performances of CCF300/BA9916 composites in three conditions were investigated. The results show that the moisture absorption and desorption behavior of CCF300/BA9916 composites basically conforms the Fick’s second law. After 35 days of moisture absorption, the composites reach to the effective moisture equilibrium level, and the effective moisture equilibrium content is about 0.85%. Compared with the dry one, the static tensile performances of CCF300/BA9916 composite laminates decreased due to moisture absorption, while the desorption process makes it some recovery.
Key wordscomposites    moisture absorption and desorption    static tensile performance    effective moisture equilibrium
    
ZTFLH:  TG174  
[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 刘瑞峰, 仙运昌, 赵瑞, 周印梅, 王文先. 钛合金/不锈钢复合板的放电等离子烧结技术制备及其性能[J]. 材料研究学报, 2023, 37(8): 581-589.
[3] 季雨辰, 刘树和, 张天宇, 查成. MXene在锂硫电池中应用的研究进展[J]. 材料研究学报, 2023, 37(7): 481-494.
[4] 王伟, 解泽磊, 屈怡珅, 常文娟, 彭怡晴, 金杰, 王快社. Graphene/SiO2 纳米复合材料作为水基润滑添加剂的摩擦学性能[J]. 材料研究学报, 2023, 37(7): 543-553.
[5] 张藤心, 王函, 郝亚斌, 张建岗, 孙新阳, 曾尤. 基于界面氢键结构的石墨烯/聚合物复合材料的阻尼性能[J]. 材料研究学报, 2023, 37(6): 401-407.
[6] 邵萌萌, 陈招科, 熊翔, 曾毅, 王铎, 王徐辉. C/C-ZrC-SiC复合材料的Si2+ 离子辐照行为[J]. 材料研究学报, 2023, 37(6): 472-480.
[7] 张锦中, 刘晓云, 杨健茂, 周剑锋, 查刘生. 温度响应性双面纳米纤维的制备和性能[J]. 材料研究学报, 2023, 37(4): 248-256.
[8] 王刚, 杜雷雷, 缪自强, 钱凯成, 杜向博文, 邓泽婷, 李仁宏. 聚多巴胺改性碳纤维增强尼龙6复合材料的界面性能[J]. 材料研究学报, 2023, 37(3): 203-210.
[9] 林师峰, 徐东安, 庄艳歆, 张海峰, 朱正旺. TiZr基非晶/TC21双层复合材料的制备和力学性能[J]. 材料研究学报, 2023, 37(3): 193-202.
[10] 苗琪, 左孝青, 周芸, 王应武, 郭路, 王坦, 黄蓓. 304不锈钢纤维/ZL104铝合金复合泡沫的孔结构、力学、吸声性能及其机理[J]. 材料研究学报, 2023, 37(3): 175-183.
[11] 张开银, 王秋玲, 向军. FeCo/SnO2 复合纳米纤维的制备及其吸波性能[J]. 材料研究学报, 2023, 37(2): 102-110.
[12] 周聪, 昝宇宁, 王东, 王全兆, 肖伯律, 马宗义. (Al11La3+Al2O3)/Al复合材料的高温性能及其强化机制[J]. 材料研究学报, 2023, 37(2): 81-88.
[13] 罗昱, 陈秋云, 薛丽红, 张五星, 严有为. 钠离子电池双层碳包覆Na3V2(PO4)3 正极材料的超声辅助溶液燃烧合成及其电化学性能[J]. 材料研究学报, 2023, 37(2): 129-135.
[14] 刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C3N4/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[15] 谢东航, 潘冉, 朱士泽, 王东, 刘振宇, 昝宇宁, 肖伯律, 马宗义. 增强颗粒尺寸对B4C/Al-Zn-Mg-Cu复合材料微观组织及力学性能的影响[J]. 材料研究学报, 2023, 37(10): 731-738.