Please wait a minute...
材料研究学报  2012, Vol. 26 Issue (4): 425-430    
  研究论文 本期目录 | 过刊浏览 |
压--压疲劳加载对2D--C/C复合材料导热性能的影响
卢锦花1, 杨晓辉1, 李贺军1, 高伟2, 张守阳1
1.西北工业大学凝固技术国家重点实验室 西安 710072
2.西安航天复合材料研究所 西安 710025
Effects of the Compressive Fatigue Loading on the Thermal Conductivity Behavior of 2D–C/C Composites
LU Jinhua1,  YANG Xiaohui1,  LI Hejun1,  GAO Wei2, ZHANG Shouyang1
1.State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072
2.Xi’an aerospace composite materials research institute, Xi’an 710025
引用本文:

卢锦花 杨晓辉 李贺军 高伟 张守阳. 压--压疲劳加载对2D--C/C复合材料导热性能的影响[J]. 材料研究学报, 2012, 26(4): 425-430.
, , , , . Effects of the Compressive Fatigue Loading on the Thermal Conductivity Behavior of 2D–C/C Composites[J]. Chin J Mater Res, 2012, 26(4): 425-430.

全文: PDF(942 KB)  
摘要: 对二维编织炭/炭复合材料(2D--C/C复合材料)进行压--压疲劳试验, 疲劳加载条件分别为应力水平1000 N、2000 N 和3000 N, 循环周次为104、1×105、3×105次时,
并测试其疲劳加载前后试样的导热性能, 研究了压--压疲劳加载对其导热性能的影响。结果表明, 压--压疲劳加载没有改变2D--C/C复合材料试样的热扩散系数随温度升高而减小以及比热容随温度升高而增大的基本规律, 但是压--压疲劳加载使其热导率、热扩散系数随着应力水平和循环周次的增大而降低, 而其比热容的变化较小。
在压--压疲劳加载过程中, 2D--C/C复合材料疲劳损伤的产生和积累导致其导热性能降低。
关键词 复合材料2D--C/C复合材料热导率热扩散系数压--压疲劳    
Abstract:The compressive fatigue experiment of 2D–C/C composites was made under the stress level of 1000 N, 2000 N and 3000 N, cycling times of 104, 105 and 3×105, the thermal conductivity behavior is tested before and after the fatigue loading, and the effects of compressive fatigue loading conditions on the thermal conductivity behavior of the composites were investigated. The results show that compressive fatigue loading does not change the law about the thermal diffusivity coefficient and specific heat capacity improve with the increasing temperature. However, after the compressive fatigue loading, the thermal conductivity coefficient, thermal diffusivity coefficient of the samples reduce with the increasing of the stress level and cycling times, while the specific heat capacity change little. The decline of the thermal conductivity is related to the fatigue damages generated and accumulated during the compressive fatigue loading after analysis.
Key wordscomposites    2D–C/C composites    thermal conductivity coefficient    thermal diffusivity coefficient    compressive fatigue loading
收稿日期: 2012-02-24     
ZTFLH: 

TB332

 
基金资助:

凝固技术国家重点实验室西北工业大学博士后基金(11-B2-2012)、国家自然科学基金重点基金50832004和国家自然科学青年基金51002124资助项目。

1 Torsten Windhorst, Gordon Blount, Carbon–carbon: a summary of recent developments and applications, Materials & Design, 18(1), 11 (1997)

2 O.Siron, G.Chollon, H.Tsuda, H.Yamauchi, K.Maeda, K.Kosaka, Microstructural and mechanical properties of filler–added coal–tarpitch–based C/C composites: the damage and fracture process in correlation with AE waveform parameters, Carbon, 38(9), 1369(2000)

3 DENG Jingyi, LIU Wenchuan, DU Haifeng, thermal shock resistance of C/C composites, Chinese Journal of Materials Research, 15(3), 372(2001)

(邓景屹, 刘文川, 杜海峰, C/C复合材料的抗热应力因素, 材料研究学报,  15(3), 372(2001))

4 J.D.Buckley, Carbon/carbon materials and composites, (Park Ridge, New Jersey, Noyes Publications, 1993) p.1 

5 LUO Ruiying, CHENG Yonghong, Effects of perform and pyrolytic carbon structure on thermophysical properties of 2D carbon/carbon composites, Chinese Journal of Aeronautics,

17(2), 112(2004)

(罗瑞盈, 程永宏, 预制体结构和热解炭组织对二维碳/碳复合材料热物理性能影响, 中国航空学报(英文版),  17(2), 112(2004))

6 YU Shu, LIU Genshan, LI Xibin, XIONG Xiang, The main factors on heat conductivity for carbon–carbon composites, Rare Metal Materials and Engineering, 32(3), 213(2003)

(于 澍, 刘根山, 李溪滨, 熊 翔, 炭/炭复合材料热导率影响因素的研究, 稀有金属材料与工程,  32(3), 213(2003))

7 ZHAO Jianguo, LI Kezhi, LI Hejun, LI Aijun, XI Chen, Research on the thermal conductivity of C/C composites, Acta Aeronautica Et Astronautica Sinica, 6(4), 501(2005)

(赵建国, 李克智, 李贺军, 李爱军, 席琛, 碳/碳复合材料的导热性能的研究, 航空学报,  6(4), 501(2005))

8 XU Huijuan, XIONG Xiang, YI Maozhong, HUANG Baiyun, WANG Hui, Thermal conductivity properties of carbon/carbon composites with thin felt laminate at high temperature, J. Cent. South Univ. (Science and Technology), 39(3), 500(2008)

(徐慧娟, 熊  翔, 易茂中, 黄伯云, 王 辉, 薄毡叠层炭/炭复合材料的高温导热性能, 中南大学学报(自然科学版),  39(3), 500(2008))

9 N.C.Gallego, D.D.Edie, B.Nysten, J.P.Issi, J.W.Treleaven, G.V.Deshpande, The thermal conductivity of ribbon–shaped carbon fibers, Carbon, 38(7), 1003(2000)

10 J.M.Ting, M.L.Lake, Vapor–grown carbon–fiber reinforced carbon composites, Carbon, 33(5), 663 (1995)

11 N.K.Mahanta, A.R.Abramson, M.L.Lake, D.J.Burton, J.Chang, H.K.Mayer, J.L.Ravine, Thermal Conductivity of Carbon Nanofiber Mats, Carbon, 48(15), 489(2010)

12 LIAO Xiaoling, The fatigue behaviors and damage evolution of 3D braided C/C composites, Docotor’s degree thesis, Norhwestern Polytechnical University (2006)

(廖晓玲, 三维编织C/C复合材料的疲劳行为以及损伤演变研究, 博士学位论文, 西北工业大学(2006))

13 S.W.Case, K.L.Resifsnider, Fatigue of Composite Materials, Comprehensive Structural Integrity, 4, 4050(2003)
[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 刘瑞峰, 仙运昌, 赵瑞, 周印梅, 王文先. 钛合金/不锈钢复合板的放电等离子烧结技术制备及其性能[J]. 材料研究学报, 2023, 37(8): 581-589.
[3] 季雨辰, 刘树和, 张天宇, 查成. MXene在锂硫电池中应用的研究进展[J]. 材料研究学报, 2023, 37(7): 481-494.
[4] 王伟, 解泽磊, 屈怡珅, 常文娟, 彭怡晴, 金杰, 王快社. Graphene/SiO2 纳米复合材料作为水基润滑添加剂的摩擦学性能[J]. 材料研究学报, 2023, 37(7): 543-553.
[5] 张藤心, 王函, 郝亚斌, 张建岗, 孙新阳, 曾尤. 基于界面氢键结构的石墨烯/聚合物复合材料的阻尼性能[J]. 材料研究学报, 2023, 37(6): 401-407.
[6] 邵萌萌, 陈招科, 熊翔, 曾毅, 王铎, 王徐辉. C/C-ZrC-SiC复合材料的Si2+ 离子辐照行为[J]. 材料研究学报, 2023, 37(6): 472-480.
[7] 张锦中, 刘晓云, 杨健茂, 周剑锋, 查刘生. 温度响应性双面纳米纤维的制备和性能[J]. 材料研究学报, 2023, 37(4): 248-256.
[8] 王刚, 杜雷雷, 缪自强, 钱凯成, 杜向博文, 邓泽婷, 李仁宏. 聚多巴胺改性碳纤维增强尼龙6复合材料的界面性能[J]. 材料研究学报, 2023, 37(3): 203-210.
[9] 林师峰, 徐东安, 庄艳歆, 张海峰, 朱正旺. TiZr基非晶/TC21双层复合材料的制备和力学性能[J]. 材料研究学报, 2023, 37(3): 193-202.
[10] 苗琪, 左孝青, 周芸, 王应武, 郭路, 王坦, 黄蓓. 304不锈钢纤维/ZL104铝合金复合泡沫的孔结构、力学、吸声性能及其机理[J]. 材料研究学报, 2023, 37(3): 175-183.
[11] 张开银, 王秋玲, 向军. FeCo/SnO2 复合纳米纤维的制备及其吸波性能[J]. 材料研究学报, 2023, 37(2): 102-110.
[12] 周聪, 昝宇宁, 王东, 王全兆, 肖伯律, 马宗义. (Al11La3+Al2O3)/Al复合材料的高温性能及其强化机制[J]. 材料研究学报, 2023, 37(2): 81-88.
[13] 罗昱, 陈秋云, 薛丽红, 张五星, 严有为. 钠离子电池双层碳包覆Na3V2(PO4)3 正极材料的超声辅助溶液燃烧合成及其电化学性能[J]. 材料研究学报, 2023, 37(2): 129-135.
[14] 刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C3N4/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[15] 谢东航, 潘冉, 朱士泽, 王东, 刘振宇, 昝宇宁, 肖伯律, 马宗义. 增强颗粒尺寸对B4C/Al-Zn-Mg-Cu复合材料微观组织及力学性能的影响[J]. 材料研究学报, 2023, 37(10): 731-738.