Please wait a minute...
材料研究学报  2012, Vol. 26 Issue (4): 402-407    
  研究论文 本期目录 | 过刊浏览 |
MTES含量对Al2O3/有机硅/SiO2杂化涂层性能的影响
刘光明,  杨晓东,  林继月,  田继红
南昌航空大学无损检测技术教育部重点实验室 南昌 330063
Influence of MTES Content on the Properties of Al2O3/Organosilicone/SiO2 Hybrid Coatings
LIU Guangming, YANG Xiaodong, LIN Jiyue, TIAN Jihong
Key Laboratory of Nondestructive Testing (Nanchang Hangkong University), Ministry of Education, Nanchang 330063
引用本文:

刘光明 杨晓东 林继月 田继红. MTES含量对Al2O3/有机硅/SiO2杂化涂层性能的影响[J]. 材料研究学报, 2012, 26(4): 402-407.
. Influence of MTES Content on the Properties of Al2O3/Organosilicone/SiO2 Hybrid Coatings[J]. Chin J Mater Res, 2012, 26(4): 402-407.

全文: PDF(1080 KB)  
摘要: 以正硅酸乙酯(TEOS)、甲基三乙氧基硅烷(MTES)、二苯基二甲氧基硅烷(DDS)和仲丁醇铝(ASB)为原料,  制备Al2O3/有机硅/SiO2杂化涂层, 测试了涂层的物理性能、耐热和电化学阻抗, 研究了MTES含量对其性能的影响。结果表明:随着MTES含量的增加, 硬度和耐冲击性先增大后减小;柔韧性和附着力良好且变化不大;当n(ASB):n(TEOS):n(MTES):n(DDS)=1:3:9:1时, Al2O3/有机硅/SiO2杂化涂层的耐热和耐蚀性能最佳。
关键词 复合材料Al2O3/有机硅/SiO2杂化涂层电化学阻抗    
Abstract:Al2O3/organosilicone/SiO2 hybrid coatings were prepared with tetraethyl orthosilicate (TEOS), methyl triethoxysilane (MTES), diphenyl dimethoxy silane (DDS) and aluminum tri-sec-butoxide (ASB) as raw material, the properties were measured, and the influence of the MTES content on the properties was investigated. The results show that the hardness and impact strength of the hybrid coatings increased followed by decreasing with the increasing MTES contents, however, the coating exhibited good flexibility and adhesion; and the hybrid coatings have the optimal heat resistance and corrosion-resistance performances when the molar ration of ASB:TEOS:MTES:DDS was set as 1:3:9:1.
Key wordscomposites    Al2O3/organosilicone/SiO2 hybrid coatings    electrochemical impedance spectroscopy
收稿日期: 2011-12-13     
ZTFLH: 

TB333

 
基金资助:

国家自然科学基金51161022资助项目。

1 LI Xuhua, YUAN Qiaolong, WANG Dening, YING Shengkang, Preparation, Property and Application of Hybrid Material, Journal of Functional Polymers, 13(2), 211(2000)

(李旭华, 袁荞龙, 王得宁, 应圣康, 杂化材料的制备、性能及应用, 功能高分子学报,  13(2), 211(2000))

2 LIU Xiaolei, LIU Xiaobo, Advances in Organic/Inorganic Hybrid Materials Prepared via Sol–Gel Process, Polymer Materials Science and Engineering, 20(2), 28(2004)

(刘晓蕾, 刘孝波, 溶胶--凝胶法制备有机/无机杂化材料研究进展, 高分子材料科学与工程,  20(2), 28(2004)

3 HE Fei, HE Xiaodong, LI Yao, Al2O3 Xero gels Synthesized by Inorganic Salt and Organic Alkoxide, J. Chin. Ceramic Soc., 34(9), 1093(2006)

(何 飞, 赫晓东, 李垚, 无机盐和有机醇盐制备Al2O3干凝胶, 硅酸盐学报,  34(9), 1093(2006))

4 ZHANG Ye, WU Dong, ZHANG Yuhan, PENG Shaoyi, Study of MTES’s hydrolysis-condensation reaction law and its application under the different conditions, Bulletin of the Chinese Ceramic Society, (6), 27(2000)

(张  晔, 吴  东, 张予罕, 彭少逸, 不同条件下MTES的水解-缩聚反应规律及其应用研究, 硅酸盐通报, (6), 27(2000))

5 LIN Jiyue, LIU Guangming, CHEN Gang, Influence of DDS Content on the Properties of Organosilicone/SiO2 Hybrid Coatings, Journal of Chinese Society for Corrosion and Protection, 31(2), 116(2011)

(林继月, 刘光明, 陈 刚, DDS含量对有机硅/SiO2杂化涂层性能的影响, 中国腐蚀与防护学报,  31(2), 116(2011))

6 HE Tao, ZHAN Xuegui, SHAO Yuegang, GAO Changyou, Optimizing the Fabrication of Abrasion-resistant and Transparent Organosilicon Coating, Science-paper Online, 2(5), 363(2007)

(何 涛, 詹学贵, 邵月刚, 高长有, 有机硅耐磨透明涂料的制备条件优化, 中国科技论文在线,  2(5), 363(2007))

7 DENG Wen, WANG Tingwei, Preparation and Curing Analysis of Silicone Enhancing Hard Coating, Paint Coat. Ind., 38(8), 34(2008)(

(邓  稳, 王庭慰, 有机硅增硬涂层的制备以及固化分析, 涂料工业,  38(8), 34(2008))

8 YU Chunxiao, WEI Qi, WANG Yanli, Preparation and Characterizaion of Hydrophobic Mesoporous Silica Membranes, Chin. J. Inorg. Chem., 23(6), 957(2007)

(于春晓, 韦 奇, 王艳丽, 疏水介孔二氧化硅膜的制备与表征, 无机化学学报,  23(6), 957(2007))

9 YANG Jing, CHEN Jierong, YU Rong, Surface Wettability and Vapour Stability of Silica Membranes Modified by Sol-Gel Method, J. Inorg. Mater., 23(4), 739(2008)

(杨  靖, 陈杰瑢, 余 嵘, 溶胶--凝胶法改性SiO2膜的润湿性与水汽稳定性, 无机材料学报,  23(4), 739(2008))

10 GAO Peng, XUE Xiangxin, Properties of UV Curable Epoxy Acrylate-Alumina Nanoparticles Composite Coating, Chin. J. Eng. Prog., 9(3), 603(2009)

(高  鹏, 薛向欣, UV固化环氧丙烯酸酯-纳米Al2O3颗粒复合涂层的性能, 过程工程学报,  9(3), 603(2009))

11 YAN Wei, LI Wenfeng, Chen Jinnan, Prepation of ”SiO2-Organic Silicone” Polymer Heat-Resisting Coating, J. Chem. Ind. Eng., 53(1), 45(2002)

(颜  薇, 李文锋, 陈晋南, ``SiO2--有机硅''共聚物耐热涂料, 化工学报,  53(1), 45(2002))

12 WEI Qi, LI Jianlin, SONG Chunlin, LIU Wei, CHEN Chusheng, Preparation, Characterization and Hydrothermal Stability of Hydrophobic Methyl-modified Silica Membranes, J. Inorg. Mater., 19(2), 417(2004)

(韦 奇, 李健林, 宋春林, 刘 卫, 陈初升, 憎水二氧化硅膜的制备、表征及水热稳定性研究, 无机材料学报,  19(2), 417(2004))

13 LU Jingjuan, YANG Hui, GUO Xingzhong, ZHANG Jun, ZHANG Ruijie, The Abrasion-Resistant Film of Methylsilicone Modified by Boehmite and Silica, J. Ceram., 27(l), 63(2006)

(陆静娟, 杨 辉, 郭兴忠, 张 俊, 张瑞捷, 硅铝溶胶改性甲基硅树脂耐划伤薄膜, 陶瓷学报,  27(l), 63(2006))

14 CAO Chunan, ZHANG Jianqing, An Introduction to Electrochemical Impedance Spectroscopy (Beijing, Science Press, 2002) p.154

(曹楚南, 张鉴清,  电化学阻抗谱导论  (北京, 科学出版社, 2002) p.154)

15 J.M.Miller, B.Dunn, Morphology and Electrochemistry of Ruthenium/Carbon Aero Gel Nanostructures, Langmui, 15(3), 799(1999)

16 Suzhu Yu, Terence K.S.Wong, Xiao Hu, Ming shyan Yong, Dielectric and Mechanical Properties of Surface Modified Organosilicate Films, J. Sol-Gel Sci. Technol., 35, 69(2005)
[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 刘瑞峰, 仙运昌, 赵瑞, 周印梅, 王文先. 钛合金/不锈钢复合板的放电等离子烧结技术制备及其性能[J]. 材料研究学报, 2023, 37(8): 581-589.
[3] 季雨辰, 刘树和, 张天宇, 查成. MXene在锂硫电池中应用的研究进展[J]. 材料研究学报, 2023, 37(7): 481-494.
[4] 王伟, 解泽磊, 屈怡珅, 常文娟, 彭怡晴, 金杰, 王快社. Graphene/SiO2 纳米复合材料作为水基润滑添加剂的摩擦学性能[J]. 材料研究学报, 2023, 37(7): 543-553.
[5] 张藤心, 王函, 郝亚斌, 张建岗, 孙新阳, 曾尤. 基于界面氢键结构的石墨烯/聚合物复合材料的阻尼性能[J]. 材料研究学报, 2023, 37(6): 401-407.
[6] 邵萌萌, 陈招科, 熊翔, 曾毅, 王铎, 王徐辉. C/C-ZrC-SiC复合材料的Si2+ 离子辐照行为[J]. 材料研究学报, 2023, 37(6): 472-480.
[7] 张锦中, 刘晓云, 杨健茂, 周剑锋, 查刘生. 温度响应性双面纳米纤维的制备和性能[J]. 材料研究学报, 2023, 37(4): 248-256.
[8] 王刚, 杜雷雷, 缪自强, 钱凯成, 杜向博文, 邓泽婷, 李仁宏. 聚多巴胺改性碳纤维增强尼龙6复合材料的界面性能[J]. 材料研究学报, 2023, 37(3): 203-210.
[9] 林师峰, 徐东安, 庄艳歆, 张海峰, 朱正旺. TiZr基非晶/TC21双层复合材料的制备和力学性能[J]. 材料研究学报, 2023, 37(3): 193-202.
[10] 苗琪, 左孝青, 周芸, 王应武, 郭路, 王坦, 黄蓓. 304不锈钢纤维/ZL104铝合金复合泡沫的孔结构、力学、吸声性能及其机理[J]. 材料研究学报, 2023, 37(3): 175-183.
[11] 张开银, 王秋玲, 向军. FeCo/SnO2 复合纳米纤维的制备及其吸波性能[J]. 材料研究学报, 2023, 37(2): 102-110.
[12] 周聪, 昝宇宁, 王东, 王全兆, 肖伯律, 马宗义. (Al11La3+Al2O3)/Al复合材料的高温性能及其强化机制[J]. 材料研究学报, 2023, 37(2): 81-88.
[13] 罗昱, 陈秋云, 薛丽红, 张五星, 严有为. 钠离子电池双层碳包覆Na3V2(PO4)3 正极材料的超声辅助溶液燃烧合成及其电化学性能[J]. 材料研究学报, 2023, 37(2): 129-135.
[14] 刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C3N4/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[15] 谢东航, 潘冉, 朱士泽, 王东, 刘振宇, 昝宇宁, 肖伯律, 马宗义. 增强颗粒尺寸对B4C/Al-Zn-Mg-Cu复合材料微观组织及力学性能的影响[J]. 材料研究学报, 2023, 37(10): 731-738.