Please wait a minute...
材料研究学报  2010, Vol. 24 Issue (2): 113-117    
  研究论文 本期目录 | 过刊浏览 |
凹凸棒粘土/聚丙烯酸复合材料的制备与调湿性能
王吉会;  李燕; 张子洋
天津大学材料科学与工程学院天津市材料复合与功能化重点实验室
Synthesis and Humidity Controlling Behaviors of Attapulgite/Polyacrylic Acid Composite
WANG Jihui;  LI Yan;  ZHANG Ziyang
School of Materials Science and Engineering; Tianjin University; Tianjin Key Laboratory of Composite and Functional Materials; Tianjin 300072
引用本文:

王吉会 李燕 张子洋. 凹凸棒粘土/聚丙烯酸复合材料的制备与调湿性能[J]. 材料研究学报, 2010, 24(2): 113-117.
. Synthesis and Humidity Controlling Behaviors of Attapulgite/Polyacrylic Acid Composite[J]. Chin J Mater Res, 2010, 24(2): 113-117.

全文: PDF(673 KB)  
摘要: 

用反相悬浮聚合法制备凹凸棒粘土/聚丙烯酸复合材料, 研究了凹凸棒含量、中和度和交联剂含量对其形貌、结构和吸放湿性能的影响。结果表明, 凹凸棒粘土/聚丙烯酸材料的表面疏松多孔;随着凹凸棒含量的增加, 在聚丙烯酸吸湿组分减少和材料疏松程度增大的综合作用下复合材料的吸放湿率先提高后降低; 随着溶液中和度的提高, 丙烯酸中的--COOH转化为亲水性更高的--COONa, 使材料的吸湿率显著提高, 但放湿率略有降低; 凹凸棒粘土/聚丙烯酸复合材料的最佳组分为凹凸棒含量10%、溶液中和度60\%--80\%、交联剂含量0.10%--0.50%。

关键词 复合材料  凹凸棒粘土 丙烯酸  结构 调湿    
Abstract

Attapulgite/polyacrylic acid composite was synthesized by using inverse suspend polymerization method, and the effects of attapulgite content, neutralization degree and crosslinker content on surface morphology, structure and humidity controlling properties were investigated. The results show that attapulgite/polyacrylic acid composite has a loose and porous surface. With the increase of attapulgite content in composite, the humidity absorption and desorption rate increases firstly under the balance of reduction of moisture absorption component and raising of surface porosity and then decreases. The composite with higher neutralization degree has a higher absorption rate but has a lower desorption rate because part of –COOH in acrylic acid changed to –COONa with higher hydrophilicity. The optimum composition of attapulgite/polyacrylic acid composite is : attapulgite content of 10%, neutralization degree of 60%–80% and crosslinker content of 0.10%–0.50%.

Key wordscomposite     attapulgite    acrylic acid    structure    humidity controlling
收稿日期: 2009-12-14     
基金资助:

天津市应用基础及前沿技术研究计划重点基金08JCZDJC18000和武汉理工大学硅酸盐材料工程教育部重点实验室开放基金SYSJJ2004-05资助项目。

1 RAN Maoyu, Review of research and application of air humidity controlling materials in Japan, Materials Reviews, 16(11), 42(2002)
(冉茂宇, 日本对调湿材料的研究及应用, 材料导报,   16(11), 42(2002))
2 JIANG Zhengwu, Research progress of humiditycontrolling materials, Materials Reviews, 20(10), 8(2006)
(蒋正武, 调湿材料的研究进展, 材料导报,  20(10), 8(2006))
3 LUO Xiyun, JIN Xinrong, Study of principle of the complex humidity controlling agent, New Chemical Materials, 28(12), 15(2000)
(罗曦云, 金鑫荣, 文物保护用复合型调湿剂的机理研究, 化工新型材料, 28(12), 15(2000))
4 FENG Naiqian, LI Guizhi, XING Feng, Study of moisture conditioning materials, New Building Materials, (6), 16(1994)
(冯乃谦, 李桂芝, 邢锋, 调湿材料的研究, 新型建筑材料, (6), 16(1994))
5 Y.Tomita, R.Takahashi, S.Sato, T.Sodesawa, M.Otsuda, Humidity control ability of silica with bimodal pore structures prepared from water glass, Journal of the Ceramic Society of Japan, 112(9), 491(2004)
6 FENG Lutian, TIAN Yiguang, SHI Shuang, JIN Ronggang, Preparation of montmorillonite/polyacrylamide composite and properties of humidity controlling materials, Journal of Shenyang Institute of Chemical Technology,  13(1), 1(1999)
(封禄田, 田一光, 石 爽, 金荣刚, 蒙脱土/聚丙烯酰胺复合材料的制备和性能研究, 沈阳化工学院学报,  13(1), 1(1999))
7 CAO Liyun, HUANG Jianfeng, XIONG Xinbo, LI Ailan, Preparation of montmorillonite/polyacrylamide humidity controlling film by intercalation methods, Non-Metallic Mines, 26(1), 30(2003)
(曹丽云, 黄剑锋, 熊信柏, 李爱兰, 配位插层聚合法制备膨润土/PAM调湿膜, 非金属矿, 26(1), 30(2003))
8 SHU Xiaowei, SHEN Shangyue, FAN Liren, XIA Kaisheng, Study on super water absorbent resin of kaolinpoly (acrylate-co-acrlamide) by water solution polymerization, China Powder Science and Technology, 11(2), 9(2005)
(舒小伟,沈上越, 范力仁, 夏开胜, 水溶液法制备高岭土/聚丙烯酸--丙烯酰胺超吸水性树脂的研究, 中国粉体技术,  11(2), 9(2005))
9 TANG Qunwei, LIN Jianming, WU Jihuai, ZHANG Chuanjuan, Preparation, properties and characterization of expanded vermiculite/poly (potassium acrylateacrylamide) superabsorbent composite, Functional Materials, 37(9), 1510(2006)
(唐群委, 林建明, 吴季怀, 张传娟, 膨胀蛭石/聚(丙烯酸钾--丙烯酰胺)高吸水性复合材料的制备、性能及表征, 功能材料, 37(9), 1510(2006))
10 WANG Jihui, WANG Zhiwei, MA Shanshan, FENG Xizeng, Synthesis, humidity controlling and antibacterial behaviors of potassium acetate/polyacrylamide composite, Chemical Industry and Engineering, 26(3), 189(2009)
(王吉会, 王志伟, 马姗姗, 冯喜增, 醋酸钾/聚丙烯酰胺类复合材料的制备与调湿抗菌性能, 化学工业与工程,  26(3), 189(2009))
11 ZHANG Junping, CHEN Hao, WANG Aiqin, Preparation and properties of polyacrylamide/attapulgite superabsorbent nanocomosites, Acta Polymeric Sinica, (5), 791(2005)
(张俊平, 陈浩, 王爱勤, 聚丙烯酰胺/凹凸棒土纳米复合高吸水性树脂的制备与性能, 高分子学报, (5), 791(2005))
12 J.P.Zhang, R.F.Liu, A.LI, Preparation, swelling behaviors and application of polyacrylamide/attapulgite superabsorbent composites, Polymers for Advanced Technology, 17(1), 12(2006)

[1] 潘新元, 蒋津, 任云飞, 刘莉, 李景辉, 张明亚. 热挤压钛/钢复合管的微观组织和性能[J]. 材料研究学报, 2023, 37(9): 713-720.
[2] 刘瑞峰, 仙运昌, 赵瑞, 周印梅, 王文先. 钛合金/不锈钢复合板的放电等离子烧结技术制备及其性能[J]. 材料研究学报, 2023, 37(8): 581-589.
[3] 季雨辰, 刘树和, 张天宇, 查成. MXene在锂硫电池中应用的研究进展[J]. 材料研究学报, 2023, 37(7): 481-494.
[4] 王伟, 解泽磊, 屈怡珅, 常文娟, 彭怡晴, 金杰, 王快社. Graphene/SiO2 纳米复合材料作为水基润滑添加剂的摩擦学性能[J]. 材料研究学报, 2023, 37(7): 543-553.
[5] 张藤心, 王函, 郝亚斌, 张建岗, 孙新阳, 曾尤. 基于界面氢键结构的石墨烯/聚合物复合材料的阻尼性能[J]. 材料研究学报, 2023, 37(6): 401-407.
[6] 邵萌萌, 陈招科, 熊翔, 曾毅, 王铎, 王徐辉. C/C-ZrC-SiC复合材料的Si2+ 离子辐照行为[J]. 材料研究学报, 2023, 37(6): 472-480.
[7] 张锦中, 刘晓云, 杨健茂, 周剑锋, 查刘生. 温度响应性双面纳米纤维的制备和性能[J]. 材料研究学报, 2023, 37(4): 248-256.
[8] 王刚, 杜雷雷, 缪自强, 钱凯成, 杜向博文, 邓泽婷, 李仁宏. 聚多巴胺改性碳纤维增强尼龙6复合材料的界面性能[J]. 材料研究学报, 2023, 37(3): 203-210.
[9] 林师峰, 徐东安, 庄艳歆, 张海峰, 朱正旺. TiZr基非晶/TC21双层复合材料的制备和力学性能[J]. 材料研究学报, 2023, 37(3): 193-202.
[10] 苗琪, 左孝青, 周芸, 王应武, 郭路, 王坦, 黄蓓. 304不锈钢纤维/ZL104铝合金复合泡沫的孔结构、力学、吸声性能及其机理[J]. 材料研究学报, 2023, 37(3): 175-183.
[11] 张开银, 王秋玲, 向军. FeCo/SnO2 复合纳米纤维的制备及其吸波性能[J]. 材料研究学报, 2023, 37(2): 102-110.
[12] 周聪, 昝宇宁, 王东, 王全兆, 肖伯律, 马宗义. (Al11La3+Al2O3)/Al复合材料的高温性能及其强化机制[J]. 材料研究学报, 2023, 37(2): 81-88.
[13] 罗昱, 陈秋云, 薛丽红, 张五星, 严有为. 钠离子电池双层碳包覆Na3V2(PO4)3 正极材料的超声辅助溶液燃烧合成及其电化学性能[J]. 材料研究学报, 2023, 37(2): 129-135.
[14] 刘志华, 岳远超, 丘一帆, 卜湘, 阳涛. g-C3N4/Ag/BiOBr复合材料的制备及其光催化还原硝酸盐氮[J]. 材料研究学报, 2023, 37(10): 781-790.
[15] 谢东航, 潘冉, 朱士泽, 王东, 刘振宇, 昝宇宁, 肖伯律, 马宗义. 增强颗粒尺寸对B4C/Al-Zn-Mg-Cu复合材料微观组织及力学性能的影响[J]. 材料研究学报, 2023, 37(10): 731-738.