Please wait a minute...
材料研究学报  2005, Vol. 19 Issue (3): 255-260    
  论文 本期目录 | 过刊浏览 |
LaNi4M(M=Ni、Co、Fe)的晶体和电子结构
刘杨;吴锋
北京理工大学国家高技术绿色材料发展中心
引用本文:

刘杨; 吴锋 . LaNi4M(M=Ni、Co、Fe)的晶体和电子结构[J]. 材料研究学报, 2005, 19(3): 255-260.

全文: PDF(694 KB)  
摘要: 根据密度泛函理论, 采用总体能量--超软赝势平面波技术,分析了LaNi5和20%Ni分别被Co和Fe代换后的晶体结构、总体能量、电子态密度以及Mulliken布居电荷. 由理论计算得到的晶体结构参数与实验值符合得比较好.取代后合金的晶体结构变化趋势与取代元素的原子半径变化趋势一致.Co和Fe代换可改变合金的电子结构, 降低合金的稳定性.Co-d或Fe-d带的位置及其中的电子数影响合金的稳定性. Co或Fe更倾向于取代3g位,且Co取代比Fe取代稳定. 合金生成热的理论计算值与实验值较为接近.
关键词 材料科学基础学科LaNi4M几何结构电子     
Key words
收稿日期: 1900-01-01     
1 J.P.P.Huijsmans,F.P.F.Berkel,G.M.Christie,Intermedi- ate temperature SOFC-a promise for the 21st century, Journal of Power Sources,71,107(1998)
2 Y.J.Leng,S.H.Chan,K.A.Khor,S.P.Jiang,Performance evaluation of anode-supported solid oxide fuel cells with thin film YSZ electrolyte,International Journal of Hydro- gen Energy,29(10),1025(2004)
3 A.Atkinson,S.Barnett,R.J.Gorte,J.T.S.Irvine, A.J.Mcevoy,M.Mogensen,S.C.Singhal,J.Vohs,Ad- vanced anodes for high-temperature fuel cells,Nature Materials,3,17(2004)
4 K.Ke,A.Gunji,H.Mori,S.Tsuchida,H.Takahashi,K.Ukai, Y.Mizutani,H.Sumi,M.Yokoyama,K.Waki,Effect of ox- ide on carbon deposition behavior of CH_4 fuel on Ni/ScSZ cermet anode in high temperature SOFCs,Solid State Ion- ics,117,541(2006)
5 HUANG Xianliang,ZHAO Hailei,WU Weijing,QIU Wei- hua,Recent progress of anode materials for solid oxide fuel cells,Journal of Chinese Ceramic Society,33(11), 1407(2005) (黄贤良,赵海雷,吴卫江,仇卫华,硅酸盐学报,固体氧化物燃料电池阳极材料的研究进展,33(11),1407(2005))
6 W.Sch(?)fer,A.Koch,U.Herold-Schmidt,D.Stolten,Mate- rials,interfaces and production techniques for planar solid oxide fuel cells,Solid State Ionics,86~88,1235(1996)
7 R.Moos,K.H.H(?)rdtl,Electronic transport properties of Sr_(1-x)La_xTiO_3 ceramics,Journal of Applied Physics, 80(1),393(1996)
8 S.Hui,A.Petric,Evaluation of yttrium-doped SrTiO_3 as an anode for solid oxide fuel cells,J.Euro.Ceram.Soc., 22,1673(2002)
9 I.K.You,J.D.Byun,Y.H.Kim,The microstructure and electrical conductivity of WO_3-doped SrTiO_3 ceramics, Solid State Ionics,83,159(1996)
10 P.Pasierb,S.Komornicki,M.Rekas,Comparison of the chemical diffusion of undoped and Nb-doped SrTiO_3, Journal of Physics and Chemistry of Solids,60, 1835(1999)
11 V.V.Kharton,A.V.Kovalevsky,A.P.Viskup,J.R.Jurado, F.M.Figueiredo,E.N.Naumovich,J.R.Frade,Transport properties and thermal expansion of Sr_(0.97)Ti_(1-x)Fe_xO_(3-δ) (x=0.2~0.8),Journal of Solid State Chemistry,156, 437(2001)
12 D.P.Fagg,V.V.Kharton,J.R.Frade,A.A.L.Ferreira,Sta- bility and mixed ionic-electronic conductivity of(Sr, La)(Ti,Fe)O_(3-δ)perovskites,Solid State Ionics,156,45 (2003)
13 O.A.Marina,N.L.Canfield,J.W.Stevenson,Thermal,elec- trical,and electrocatalytical properties of lanthanum- doped strontium titanate,Solid State Ionics,149(1~2), 21(2002)
14 S.A.Howard,J.K.Yau,H.U.Anderson,Structural charac- teristics of Sr_(1-x)La_xTiO_(3+δ)as a function of oxygen par- tial pressure at 1400℃,Journal of Applied Physics,65(4), 1492(1989)
15 S.Hashimoto,L.Kindermann,F.W.Poulsen,M.Mogensen, A study on the structural and electrical properties of lanthanum-doped strontium titanate prepared in air, Journal of Alloys and Compounds,397,245(2005)
16 S.Q.Hui,A.Petric,Electrical properties of yttrium-doped strontium titanate under reducing conditions,Journal of the Electrochemical Society,149(1),J1(2002)J
[1] 杨栋天, 熊良银, 廖洪彬, 刘实. 基于热力学模拟计算的CLF-1钢改良设计[J]. 材料研究学报, 2023, 37(8): 590-602.
[2] 姜水淼, 明开胜, 郑士建. 晶界偏析以及界面相和纳米晶材料力学性能的调控[J]. 材料研究学报, 2023, 37(5): 321-331.
[3] 王伟, 周山琦, 宫鹏辉, 张浩泽, 史亚鸣, 王快社. 退火温度对TC4钛合金热轧板材的显微组织、织构和力学性能影响[J]. 材料研究学报, 2023, 37(1): 70-80.
[4] 孙艺, 韩同伟, 操淑敏, 骆梦雨. 氟化五边形石墨烯的拉伸性能[J]. 材料研究学报, 2022, 36(2): 147-151.
[5] 谢明玲, 张广安, 史鑫, 谭稀, 高晓平, 宋玉哲. Ti掺杂MoS2薄膜的抗氧化性和电学性能[J]. 材料研究学报, 2021, 35(1): 59-64.
[6] 王伟, 宫鹏辉, 张浩泽, 史亚鸣, 王萌, 张晓锋, 王快社. 电子束冷床熔炼TC4钛合金的热变形行为[J]. 材料研究学报, 2020, 34(9): 665-673.
[7] 孙京丽,周海涛,陈莉,吴宏,刘维丽,姚斐,徐玉棱. 晶粒尺寸对304奥氏体不锈钢组织演变和性能的影响[J]. 材料研究学报, 2020, 34(3): 231-240.
[8] 岳颗, 刘建荣, 杨锐, 王清江. Ti65合金的初级蠕变和稳态蠕变[J]. 材料研究学报, 2020, 34(2): 151-160.
[9] 鲁效庆,张全德,魏淑贤. A-π-D-π-A型吲哚类染料敏化剂的光电特性[J]. 材料研究学报, 2020, 34(1): 50-56.
[10] 涂坚,刘雷,丁石润,李建波,周志明,董安平,黄灿. 预变形程度和变形温度对CoCrFeMnNi高熵合金的变形机制及后续再结晶行为的影响[J]. 材料研究学报, 2019, 33(6): 427-434.
[11] 李学雄,徐东生,杨锐. 钛合金双态组织高温拉伸行为的晶体塑性有限元研究[J]. 材料研究学报, 2019, 33(4): 241-253.
[12] 陈朝阳,陈志勇,朱绍祥,刘建荣,王清江. Ti750合金中初生α相的体积分数对固溶温度的敏感性[J]. 材料研究学报, 2019, 33(10): 794-800.
[13] 高琳琳, 张雷达, 王庆林, 叶慧, 万国顺, 姜明顺, 贾玉玺. 基于FBG在线监测的环氧树脂封装材料的固化过程[J]. 材料研究学报, 2018, 32(10): 737-742.
[14] 刘庆生, 曾少军, 张丹城. 基于细观结构的阴极炭块钠膨胀应力数值分析及实验验证[J]. 材料研究学报, 2017, 31(9): 703-713.
[15] 董伟,黄志涛,刘红梅,杨光,杨洋,杨帆. 电子束成形TC18钛合金晶体取向规律研究[J]. 材料研究学报, 2017, 31(3): 203-210.